Hach SensION3 Guide de référence

51750-23

Laboratory pH Meter Quick Reference Card

Changing Meter Setup Options

Setup options 1–5 have default settings (underlined in the table). To change the default setting, use

the table below. Settings for options 6–8 must be entered from the setup menu.

Setup How To Get There Description of Option

1 Turn the meter on and press

SETUP.PressENTER.Choose between using the BNC or 5-pin connector. ENTER

toggles between the options. Press EXIT when selection is

complete.

2 Turn the meter on and press

SETUP.Press the up arrow once.

Press ENTER.

Turn display lock On or Off.ENTER toggles between the

options. Press EXIT when selection is complete.

3 Turn the meter on and press

SETUP.Press the up arrow twice.

Press ENTER.

Choose between °C or °F for displayed temperatures.

ENTER toggles between the options. Press EXIT when

selection is complete.

4 Turn the meter on and press

SETUP.Press the up arrow three

times. Press ENTER.

Select measurement resolution from tenths, hundredths, or

thousandths. ENTER toggles between the options. Press

EXIT when selection is complete.

5 Turn the meter on and press

SETUP.Press the up arrow four

times. Press ENTER.

Select pH 6.86 or 7.00 as the pH the meter will automatically

recognize during calibration. ENTER toggles between the

options. Press EXIT when selection is complete.

6 Turn the meter on and press

SETUP.Press the up arrow five

times. Press ENTER.

Select the time of day by pressing the desired number key.

The meter uses a 24-hour clock. All four places must have a

value. Use a 0 if the left-most digit does not have a value

(i.e., 03:08). Press ENTER to accept the value.

7 Turn the meter on and press

SETUP.Press the up arrow six

times. Press ENTER.

Set the month and day by pressing the desired number

keys. The month uses the two places left of the slash; the

day of the month occupies the two places right of the slash.

Enter a 0 if the left-most digit does not have a value

(i.e., 02/06). Press ENTER to accept the value.

8 Turn the meter on and press

SETUP.Press the up arrow seven

times. Press ENTER.

Set the year by using the number keys. Every place must

have a value. Press ENTER to accept the value.

pH Calibration

1. Prepare two or three pH buffers (choose from pH 4.01, 6.86, 7.0, and 10.01 buffers). The meter

can use other buffers for calibration, if desired.

2. Turn the instrument on. Press CAL. The display will prompt for standard 1.

3. Place the pH electrode in one of the buffers.

4. For auto-recognition, press READ/ENTER. To enter the standard value, use the number keys and

press READ/ENTER. Toggle between pH and mV values using the pH mV key.

5. When the reading is stable, the meter will prompt for the next standard. Rinse the electrode

with deionized water.

6. Place the electrode in the second buffer. Press READ/ENTER.

7. Repeat steps 3–6for the third buffer or press EXIT.

8. When the reading is stable, the slope and Store ? will appear.

9. To save the calibration, press ENTER. To exit without saving the calibration, press EXIT.

ap/dk Rev 1 9/99

Autres manuels pour sensION3

Autres manuels Hach Instrument de mesure

Hach

Hach FH950 Manuel rapide

Hach

Hach MTC101 Manuel utilisateur

Hach

Hach sensION+ EC71 Manuel utilisateur

Hach

Hach POCKET COLORIMETER II Manuel rapide

Hach

Hach Sigma 950 Manuel rapide

Hach

Hach TPM870 Manuel utilisateur

Hach

Hach POLYMETRON 8810 ISE Manuel rapide

Hach

Hach NA5600 sc Na+ Mode d'emploi

Hach

Hach HQ11d Manuel rapide

Hach

Hach HQ440d Manuel rapide

Hach

Hach 1735 TRO Manuel utilisateur

Hach

Hach EZ Series Manuel rapide

Hach

Hach Accu4 Manuel utilisateur

Hach

Hach DR/820 Manuel utilisateur

Hach

Hach TU5200 Manuel rapide

Hach

Hach DR2400 Manuel utilisateur

Hach

Hach PHC725 Manuel utilisateur

Hach

Hach POLYMETRON 9125 Manuel utilisateur

Hach

Hach 1720E Manuel utilisateur

Hach

Hach 2100Q Manuel rapide

Hach

Hach LPV445.99.02110 Manuel utilisateur

Hach

Hach ANATEL PAT700 Manuel utilisateur

Hach

Hach POLYMETRON 8810 Manuel rapide

Hach

Hach DR/2010 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

Hach sensION3 Guide de référence

Manuels Instrument de mesure populaires d'autres marques