H3C SR6608 Manuel utilisateur

H3C SR6608/6604 Routers

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08040D-20080516-C-1.02

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www.h3c.com

Technical Support

customer_service@h3c.com

http://www.h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C SR66 Series Routers documentation set includes

the following:

Manual Description

H3C SR66 Series Routers User Manual

It is a guide for the user to perform the

operations correctly. It is organized into

the parts of getting started, system

management, interface, link layer

protocol, network protocol, routing

protocol, security, VPN, and QoS.

It also gives the user a detailed

description of the operating commands.

It is organized into the parts of getting

started, system management, interface,

link layer protocol, network protocol,

routing protocol, security, VPN, QoS, as

well as a command index.

Low-End and Mid-Range Series Routers

Cable Manual

This manual introduces all cable pinouts

available with low-end and mid-range

series routers.

Organization

H3C SR6608/6604 Routers Installation Manual is organized as follows:

Chapter Contents

1 Router Overview

Briefly introduces the product

specifications, as well as the features

and applications of the H3C

SR6608/6604 routers.

2 Interface Modules Describes the interface cards and

interface modules supported by the H3C

SR6608/6604 routers.

3 Arranging Slots and Numbering

Interfaces Introduces the slots and numbering

rules of the H3C SR6608/6604 routers.

4 Preparing for Installation

Describes the requirements on

installation site, the safety

recommendations before and during

installation, and the required tools.

Chapter Contents

5 Installing the Router

Introduces how to install the

SR6608/6604 routers, as well as how to

connect the power cable, console cable,

AUX port cable, Ethernet cable,

interface card and interface module

cable.

6 Starting and Configuring the Router

Helps you get familiar with the basic

knowledge of how to boot and configure

the H3C SR6608/6604 routers, including

device startup, power-on, and

initialization of system files, and so on.

7 Maintaining Software

Introduces how to maintain the software

of the H3C SR6608/6604 routers,

including upgrading the software and

updating the configuration files.

8 Maintaining Hardware Introduces how to maintain the

hardware of the H3C SR6608/6604

routers.

9 Troubleshooting Describes some problems that may

occur during installation and startup of

the router and how to solve them.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

Convention Description

&<1-n> The argument(s) before the ampersand (&) sign can be

entered 1 to n times.

# A line starting with the # sign is comments.

II. GUI conventions

Convention Description

< > Button names are inside angle brackets. For example, click

<OK>.

[ ] Window names, menu items, data table and field names

are inside square brackets. For example, pop up the [New

User] window.

/ Multi-level menus are separated by forward slashes. For

example, [File/Create/Folder].

III. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Environmental Protection

This product has been designed to comply with the requirements on environmental

protection. For the proper storage, use and disposal of this product, national laws and

regulations must be observed.

H3C SR6608/6604 Routers Installation Manual Table of Contents

Table of Contents

Chapter 1 Router Overview .......................................................................................................... 1-1

1.1 Introduction ........................................................................................................................ 1-1

1.2 Physical Description .......................................................................................................... 1-2

1.2.1 Front View ............................................................................................................... 1-2

1.2.2 Rear View................................................................................................................ 1-4

1.3 System Specifications........................................................................................................ 1-5

1.3.1 RPE-X1 ................................................................................................................... 1-5

1.3.2 FIP-100.................................................................................................................... 1-9

1.3.3 FIP-200.................................................................................................................. 1-13

1.3.4 Dimensions, Weight and LPU Slots ...................................................................... 1-16

1.3.5 Voltage and Current .............................................................................................. 1-16

1.3.6 Interface Modules.................................................................................................. 1-16

1.3.7 Fan Tray ................................................................................................................ 1-19

1.3.8 Operating environment.......................................................................................... 1-19

1.4 Components..................................................................................................................... 1-19

1.4.1 RPE-X1 ................................................................................................................. 1-19

1.4.2 FIP-100/FIP-200.................................................................................................... 1-28

1.4.3 Power Supply Module ........................................................................................... 1-36

1.4.4 Port Lightning Arrester (Optional) ......................................................................... 1-38

1.4.5 Power Lightning Arrester (Optional)...................................................................... 1-38

1.4.6 Signal Lightning Arrester (Optional)...................................................................... 1-39

1.4.7 System Software ................................................................................................... 1-39

H3C SR6608/6604 Routers Installation Manual Chapter 1 Router Overview

1-1

Chapter 1 Router Overview

1.1 Introduction

The H3C SR6608 and SR6604 routers are high-performance service routers

developed by Hangzhou H3C Technologies Co., Ltd. (hereinafter referred to as H3C)

for enterprise networks and carrier-edge access. The SR6608 and SR6604 adopt two

route processing engine-X1s (RPE-X1s), two power modules, and a distributed

modular architecture. Abundant optional modules are available so that the two service

routers can have a powerful processing capability and support flexible configuration to

fully meet the requirements of enterprise networks and carrier networks. The SR6608

and SR6604 can work at the core layer of small- and medium-sized enterprise

networks or at the distribution layer and core layer of large-sized enterprise networks.

They can also work at the access layer of carrier networks or large enterprise networks.

With the high-performance microprocessor technology, advanced hardware

architecture and H3C proprietary Comware V5 platform, the SR6608 and SR6604

provide high service processing capabilities, good service scalability, and high reliability.

In addition, the SR6608 and SR6604 can work together with other H3C network

devices to provide full network solutions for carriers and departments in electric power,

finance, tax, public security, railway and education, as well as for medium- and

large-sized enterprises. The full compliance with national and international standards

ensures the interoperability with the products of other manufacturers at different layers.

The SR6608 and SR6604 support high-speed interface modules (HIMs) and provide a

bus processing capability of up to 10 Gbps, which can meet the high-speed

performance requirements of users. In addition, the SR6608 and SR6604 are

compatible with some multi-functional interface modules (MIMs) of the H3C AR/MSR

series routers to guarantee the smooth upgrade from narrowband access to broadband

access, improve the competitiveness, and protect existing investments. For easy

description, the term “device” is used throughout this document to refer to any SR6608

or SR6604 router if not otherwise specified.

H3C SR6608/6604 Routers Installation Manual Chapter 1 Router Overview

1-2

1.2 Physical Description

1.2.1 Front View

(1) (2) (3) (4)

(7) (5)(8)(9)(10)

(13)

(6)

(15)

(14)

(12)

(11)

(1) Left mounting bracket (2) Blank panel for RPE-X1 (Slot 1)

(3) RPE-X1 (Slot 0) (4) Right mounting bracket

(5) Chassis handle (6) Fan tray

(7) AC power module (PWR 1)

(8) Blank panel for PoE power module (reserved PoE slot)

(9) Blank panel for power module (PWR 2) (10) ESD socket and silkscreen

(11) Blank panel for LPU (Slot 5) (12) Blank panel for LPU (Slot 4)

(13) Blank panel for LPU (Slot 3) (14) Blank panel for LPU (Slot 2)

(15) Cable management bracket

Figure 1-1 Front view of the SR6608

H3C SR6608/6604 Routers Installation Manual Chapter 1 Router Overview

1-3

(1) (2) (3) (4)

(11)

(13)

(12)

(7) (5)(8)(9)(10) (6)

(1) Left mounting bracket (2) Blank panel for RPE-X1 (Slot 1)

(3) RPE-X1 (Slot 0) (4) Right mounting bracket

(5) Chassis handle (6) Fan tray

(7) AC power module (PWR 1)

(8) Blank panel for PoE power module (reserved PoE slot)

(9) Blank panel for power module (PWR 2) (10) ESD socket and silkscreen

(11) Blank panel for LPU (Slot 3) (12) Blank panel for LPU (Slot 2)

(13) Cable management bracket

Figure 1-2 Front view of the SR6604

Note:

Currently, the device does not support power over Ethernet (PoE).

H3C SR6608/6604 Routers Installation Manual Chapter 1 Router Overview

1-4

1.2.2 Rear View

(1) Warning label (2) Handle on the rear chassis panel

(3) Upper slide rail for the air filter (4) Air filter (optional)

(5) Lower slide rail for the air filter (6) Chassis handle

(7) Weight-bearing warning label (50 kg, namely, 110.2 lb.)

(8) Grounding screw and sign (9) Vents

Figure 1-3 Rear view of the SR6608

(1) Warning label (2) Handle on the rear chassis panel

(3) Upper slide rail for the air filter (optional) (4) Air filter (optional)

(5) Lower slide rail for the air filter (optional) (6) Chassis handle

(7) Weight-bearing warning label (50 kg, namely, 110.2 lb.)

(8) Grounding screw and sign (9) Vents

Figure 1-4 Rear view of the SR6604

Autres manuels pour SR6608

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels H3C Routeur réseau

H3C

H3C WT2024-U-PWR Mode d’emploi

H3C

H3C CR16006-F Guide rapide

H3C

H3C S5500-HI Switch Series Manuel utilisateur

H3C

H3C SR6604 Manuel utilisateur

H3C

H3C MSR810 Manuel utilisateur

H3C

H3C S5500-EI series Manuel utilisateur

H3C

H3C RA10 Manuel utilisateur

H3C

H3C S5500-SI Series Manuel utilisateur

H3C

H3C MSR 900 Series Manuel utilisateur

H3C

H3C S3100-52P Manuel utilisateur

H3C

H3C MSR 800 Manuel d'utilisation et d'entretien

H3C

H3C S5500-EI series Manuel utilisateur

H3C

H3C H3C S5600 Series Manuel utilisateur

H3C

H3C S7502 Manuel utilisateur

H3C

H3C SR6616 Manuel d'utilisation et d'entretien

H3C

H3C MSR 50-40 Manuel utilisateur

H3C

H3C S3100-52P Instructions d'installation

H3C

H3C S3100-52P Manuel utilisateur

H3C

H3C H3C S7500E Series Instructions d'installation

H3C

H3C CR16000-F Manuel utilisateur

H3C

H3C RA100 Manuel utilisateur

H3C

H3C MSR2600-6-X1-GL Manuel utilisateur

H3C

H3C MSR-20-21 ROUTER Manuel utilisateur

H3C

H3C MSR Series Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité