H3C MSR Series Manuel utilisateur

H3C MSR Series Routers

OAP/OAPS V2 Module

User Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6PW102-20120703

licensors

No part of this manual may be reproduced or transmitted in any form or

by any means without prior written consent of Hangzhou H3C

Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care, , TOP G, , IRF,

NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath,

Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus,

N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou

H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the

property of their respective owners

Notice

The information in this document is subject to change without notice.

Every effort has been made in the preparation of this document to ensure

accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any

kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental

protection requirements. The storage, use, and disposal of this product

must meet the applicable national laws and regulations.

Preface

The H3C MSR Series Routers OAP/OAPS V2 Module User Guide

describes hardware specifications of OAP/OAPS V2 modules,

configuration on routers, and how to log in to the operating system of an

OAP/OAPS V2 module.

This preface includes:

•Audience

•Conventions

•About the H3C MSR documentation set

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the OAP/OAPS V2

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter

literally as shown.

Italic Italic text represents arguments that you replace with actual

values.

Convention Descri

tion

[ ] Square brackets enclose syntax choices (keywords or

arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by

vertical bars, from which you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices

separated by vertical bars, from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices

separated by vertical bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax

choices separated by vertical bars, from which you select one

choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before

the ampersand (&) sign can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

Symbols

Convention Descri

tion

NOTE An alert that contains additional or supplementary

information.

About the H3C MSR documentation set

The H3C MSR documentation set includes:

Cate

Documents

Pur

oses

Operations and

maintenance

H3C MSR Series

Routers

OAP_OAPS V2

Module

Customization

User Guide

Describes how to install the operating

system of an OAP/OAPS V2 module

and the configuration procedures for

customizing the OAP/OAPS V2

module

Obtaining documentation

You can access the most up-to-date H3C product documentation on the

World Wide Web at http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of

product documentation:

[Technical Support & Documents > Technical Documents] – Provides

hardware installation, software upgrading, and software feature

configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and

technologies, as well as solutions.

[Technical Support & Documents > Software Download] – Provides the

documentation released with the software version.

Technical support

servic[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to

info@h3c.com.

We appreciate your comments.

Contents

Overview···········································································································1

Panel views······································································································· 2

OAP Smart MIM Module········································································ 2

OAP MIM Module··················································································· 2

OAP FIC Module····················································································· 3

LEDs ··················································································································· 3

Stand By button ································································································ 4

GigabitEthernet management port································································· 5

Configuring ACFP and ACSEI on the router···················································6

ACFP configuration·························································································· 6

Introduction to ACFP ··············································································· 6

Enabling ACFP server ············································································· 7

Configuring the ACFP client··································································· 7

ACSEI configuration ························································································ 7

Introduction to ACSEI·············································································· 7

Enabling ACSEI server············································································ 8

Logging in to and resetting the Linux operating system of an OAP/OAPS

module···············································································································9

Redirecting to an OAP/OAPS module from the router································ 9

Resetting the system of an OAP/OAPS module ··········································· 9

Configuration examples ················································································10

Overview

The Open Application Platform (OAP) and Open Application

Platform-Smart (OAPS) are designed for new services.

H3C MSR Series Routers provides the following OAPS and OAP

modules:

•OAP Smart MIM Module

•OAP MIM Module

•OAP FIC Module

An OAPS or OAP module can be installed in the expansion module slot

on the router. An OAPS or OAP module runs an independent Linux

operating system. You can load software such as security and voice in the

operating system.

Table 1 Compatibility matrix between OAPS/OAP and routers

Module Router

OAP Smart MIM

Module

•MSR 30-11

•MSR 30-16

•MSR 30-20

•MSR 30-40

•MSR 30-60

OAP MIM Module

•MSR 30-16

•MSR 30-20

•MSR 30-40

•MSR 30-60

OAP FIC Module

•MSR 50-40

•MSR 50-60

•MPU-G2

Panel views

OAP Smart MIM Module

Figure 1 Front panel

(1) USB port (2) 100/1000Base-T Ethernet port LED

(3) LINK LED for the GigabitEthernet management port

(4) Stand By button (5) System status LED (SYS)

(6) Disk LED (DISK) (7) Gi

abitEthernet mana

ement port

OAP MIM Module

Figure 2 Front panel

(1) USB port (2) 100/1000Base-T Ethernet port LED

(3) LINK LED for the GigabitEthernet management port

(4) Stand By button (5) System status LED (SYS)

(6) Disk LED (DISK) (7) Gi

abitEthernet mana

ement port

OAP FIC Module

Figure 3 Front panel

(1) 100/1000Base-T Ethernet port LED

(2) LINK LED for the GigabitEthernet management port (3) Stand By button

(4) System status LED (SYS)

(5) Disk LED

(6) Gi

abitEthernet mana

ement port

(7) USB port

LEDs

Table 2 LED description

LED mark Status

Descri

tion

SYS

Steady green A memory test is being performed.

Fast flashing (green) The BIOS is starting up.

Slow flashing (green) The operating system is starting up.

Steady yellow Reserved.

Fast flashing (yellow) The boot loader does not exist.

Slow flashing (yellow) The memory test has failed.

Off The module is powered off.

1 2

34567

LED mark Status

Descri

tion

DISK

Steady green The disk is in position.

Flashing green The disk is performing a read/write

operation.

Steady yellow A problem has occurred to the disk.

Off The disk is not in position.

LINK/ACT

Steady yellow A link is present on the port.

Flashing yellow Data is being transmitted or received

over the link.

100/1000M

Off

(Suppose the LINK/ACT

LED is yellow)

A 10 Mbps link is present.

Steady orange

(Suppose the LINK/ACT

LED is yellow)

A 100 Mbps link is present.

Steady green

(Suppose the LINK/ACT

LED is yellow)

A 1000 Mbps link is present.

Stand By button

Table 3 Stand By button operation description

stem status O

eration

Descri

tion

The OAP module is

power off. Press the Stand By button. The module is turned on

and the system starts up.

The OAP module is

powered on.

Press and hold the Stand By

button for less than four

seconds.

Soft off (the system is shut

down first and then the

module is powered off.)

Press and hold the Stand By

button for more than four

seconds.

Force a shutdown.

Autres manuels pour MSR Series

Table des matières

Autres manuels H3C Routeur réseau

H3C

H3C RA200 Manuel utilisateur

H3C

H3C S5830V2 series Manuel utilisateur

H3C

H3C MSR 5660 Manuel d'utilisation et d'entretien

H3C

H3C SR8800 IM-FW-II Manuel utilisateur

H3C

H3C SR6600 Series Guide d'installation

H3C

H3C SR6600 SPE-FWM Manuel utilisateur

H3C

H3C AR 18-3XE Series Manuel utilisateur

H3C

H3C SR6604 Manuel utilisateur

H3C

H3C CR16000-F Manuel utilisateur

H3C

H3C H3C MSR 20 Manuel utilisateur

H3C

H3C S12500R Series Manuel d'utilisation et d'entretien

H3C

H3C S5500-SI Series Manuel utilisateur

H3C

H3C S12508CR Manuel d'utilisation et d'entretien

H3C

H3C S5500-SI Series Manuel utilisateur

H3C

H3C S7502 Manuel utilisateur

H3C

H3C WT2024-U-PWR Mode d’emploi

H3C

H3C RA100 Manuel utilisateur

H3C

H3C S7500 Series Instructions d'installation

H3C

H3C S12500CR Series Manuel utilisateur

H3C

H3C MSR 20 Series Manuel utilisateur

H3C

H3C MSR 20-20 Manuel utilisateur

H3C

H3C S12500R Series Guide rapide

H3C

H3C MSR 3600 Manuel utilisateur

H3C

H3C S5500-EI series Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité