H3C S3610 Series Manuel utilisateur
H3C S3610 Series Ethernet Switches
Quick Start
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08225A-20080526-C-1.07
Copyright © 2006-2008, Hangzhou H3C Technologies Co.,
Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form
or by any means without prior written consent of Hangzhou H3C
Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF,
NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath,
Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus,
N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou
H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the
property of their respective owners.
Notice
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to
ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of
any kind, express or implied.
To obtain the latest information, please access:
http://www.h3c.com
Technical Support
customer_servic[email protected]
http://www.h3c.com
About This Manual
Related Documentation
In addition to this manual, each H3C S3610 Series Ethernet
Switches documentation set includes the following:
Manual Content
H3C S3610&S5510 Series
Ethernet Switches Operation
Manual
It is used for assisting the users
in data configurations and
typical applications
H3C S3610&S5510 Series
Ethernet Switches Command
Manual
It is used for assisting the users
in using various commands.
H3C S3610 Series Ethernet
Switches Installation Manual
It is used for assisting the users
in switch installation, booting up,
hardware and software
maintenance.
Organization
H3C S3610 Series Ethernet Switches Quick Start is organized as
follows:
Chapter Contents
1 Product Overview Introduces the characteristics and technical
specifications of S3610 Series Ethernet
Switches.
Chapter Contents
2 Installation
Preparation
Introduces the installation preparation and
precaution of S3610 Series Ethernet
Switches.
3 Installing the
Switch
Introduces the procedures to install an
S3610 Series Ethernet Switch, including the
setup of the mainframe, cards and cables.
4 Lightning
Protection of the
Switch
Introduces lightning protection of S3610
Series Ethernet Switches.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in
Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square
brackets [ ] are optional.
{ x | y | ... }
Alternative items are grouped in braces
and separated by vertical bars. One is
selected.
[ x | y | ... ]
Optional alternative items are grouped in
square brackets and separated by vertical
bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces
and separated by vertical bars. A minimum
of one or a maximum of all can be selected.
Convention Description
[ x | y | ... ] *
Optional alternative items are grouped in
square brackets and separated by vertical
bars. Many or none can be selected.
&<1-n> The argument(s) before the ampersand (&)
sign can be entered 1 to n times.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
< > Button names are inside angle brackets.
For example, click <OK>.
[ ]
Window names, menu items, data table
and field names are inside square
brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward
slashes. For example, [File/Create/Folder].
III. Symbols
Convention Description
Warning Means reader be extremely careful.
Improper operation may cause bodily
injury.
Caution
Means reader be careful. Improper
operation may cause data loss or damage
to equipment.
Note Means a complementary description.
Environmental Protection
This product has been designed to comply with the requirements
on environmental protection. For the proper storage, use and disposal
of this product, national laws and regulations must be observed.
Quick Start
H3C S3610 Series Ethernet Switches Table of Contents
i
Table of Contents
Chapter 1 Product Overview ........................................................1-1
1.1 Introduction ........................................................................1-1
1.2 S3610-28TP Ethernet Switch.............................................1-3
1.2.1 Front Panel ..............................................................1-3
1.2.2 Rear Panel...............................................................1-4
1.2.3 Power Supply System .............................................1-4
1.2.4 Cooling System .......................................................1-5
1.3 S3610-28P Ethernet Switch...............................................1-5
1.3.1 Front Panel ..............................................................1-5
1.3.2 Rear Panel...............................................................1-6
1.3.3 Power Supply System .............................................1-6
1.3.4 Cooling System .......................................................1-6
1.4 S3610-28F Ethernet Switch ...............................................1-7
1.4.1 Front Panel ..............................................................1-7
1.4.2 Rear Panel...............................................................1-7
1.4.3 Power Supply System .............................................1-8
1.4.4 Cooling System .......................................................1-8
1.5 S3610-52P Ethernet Switch...............................................1-8
1.5.1 Front Panel ..............................................................1-8
1.5.2 Rear Panel...............................................................1-9
1.5.3 Power Supply System ...........................................1-10
1.5.4 Cooling System .....................................................1-10
1.6 S3610-52M/S3610-52M-DC Ethernet Switch ..................1-10
1.6.1 Front Panel ............................................................1-10
1.6.2 Rear Panel.............................................................1-11
Quick Start
H3C S3610 Series Ethernet Switches Table of Contents
ii
1.6.3 Power Supply System ...........................................1-13
1.6.4 Cooling System .....................................................1-13
1.7 LEDs ................................................................................1-14
1.7.1 LEDs of the S3610-28TP Ethernet switch.............1-14
1.7.2 LEDs of the S3610-28P Ethernet switch...............1-21
1.7.3 LEDs of the S3610-28F Ethernet switch ...............1-26
1.7.4 LEDs of the S3610-52P Ethernet switch...............1-34
1.7.5 LEDs of the S3610-52M/S3610-52M-DC Ethernet
switch..............................................................................1-34
1.8 Specifications of the S3610 Series ..................................1-36
1.9 SFP modules....................................................................1-38
1.9.1 100 Mbps SFP modules ........................................1-38
1.9.2 1000 Mbps SFP modules ......................................1-38
Chapter 2 Installation Preparation...............................................2-1
2.1 Safety Precautions .............................................................2-1
2.2 Installation Site...................................................................2-1
2.2.1 Temperature/Humidity.............................................2-2
2.2.2 Cleanness................................................................2-2
2.2.3 Electromagnetic Susceptibility.................................2-3
2.2.4 Laser Safety ............................................................2-4
2.3 Installation Tools ................................................................2-4
Chapter 3 Installing the Switch....................................................3-1
3.1 Installing a Switch ..............................................................3-1
3.1.1 Cabinet Mounting ....................................................3-1
3.1.2 Desk Mounting.........................................................3-8
3.2 Connecting the Power Cord and the Ground Wire ............3-8
3.2.1 Connecting the AC Power Cord ..............................3-8
3.2.2 Connecting the DC-Input Power Cord...................3-10
Quick Start
H3C S3610 Series Ethernet Switches Table of Contents
iii
3.2.3 Connecting the Ground Wire.................................3-15
3.2.4 Multi-power Input...................................................3-19
3.3 Connecting the Switch to a Console Terminal.................3-20
3.3.1 Console Cable .......................................................3-20
3.3.2 Connecting the Console Cable..............................3-21
3.4 Installation of the Optional Interface Modules..................3-22
3.4.1 Installation of the Optional Interface Modules .......3-22
3.4.2 Removal of Optional Interface Modules ................3-23
3.5 Verifying Installation.........................................................3-24
Chapter 4 Lightning Protection of the Switch ............................4-1
4.1 Installation of Lightning Arrester for AC Power (Socket Strip
with Lightning Protection).........................................................4-1
4.2 Installation of Lightning Arrester for Network Port .............4-4
Quick Start
H3C S3610 Series Ethernet Switches Chapter 1 Product Overview
1-1
Chapter 1 Product Overview
1.1 Introduction
H3C S3610 Series Ethernet Switches (the S3610 series) are
L2/L3 wire speed Ethernet switches developed by Hangzhou H3C
Technologies Co., Ltd. They are intelligent network management
switches intended for networks where high performance, dense port
distribution, and ease of installation are required.
The S3610 series are designed to operate on the convergence
and access layer of intranets and metropolitan area networks (MANs).
They support both IPv4 and IPv6 and thus offer abundant services
and routing functionalities.
Currently, S3610 series contain the following models.
Table 1-1 Models in the S3610 series
Model Power
supply
Total
service
ports
Number
of 100
Mbps
ports
Number
of 1000
Mbps
uplink
ports
Console
port
S3610
-28TP
AC-input
DC-input 28
24 fixed
10Base-
T/100Ba
se-TX
Ethernet
ports
2 × 1000
Mbps SFP
ports
2 ×
10/100/10
00MBase-
T Ethernet
ports
One
Autres manuels pour S3610 Series
21
Table des matières
Autres manuels H3C Routeur réseau
H3C
H3C SecPath L5000-S Manuel d'utilisation et d'entretien
H3C
H3C S3610 Series Instructions d'installation
H3C
H3C S3100-52P Manuel utilisateur
H3C
H3C SR8800-F Manuel utilisateur
H3C
H3C RA10 Manuel d'utilisation et d'entretien
H3C
H3C S12500R Series Guide d'application
H3C
H3C MSR 3600 Manuel utilisateur
H3C
H3C MSR 20-20 Manuel utilisateur
H3C
H3C CR16000-F Manuel utilisateur
H3C
H3C S5560-HI Series Manuel utilisateur
H3C
H3C SR6600 SPE-FWM Manuel utilisateur
H3C
H3C S3100-52P Manuel utilisateur
H3C
H3C S5830V2 series Manuel utilisateur
H3C
H3C SR6600 SPE-FWM Manuel utilisateur
H3C
H3C H3C S3600 Series Manuel utilisateur
H3C
H3C H3C S7500E Series Manuel d'installation
H3C
H3C S5500-SI Series Manuel utilisateur
H3C
H3C S3610 Series Manuel utilisateur
H3C
H3C CR19000-20 Manuel utilisateur
H3C
H3C MSR 2600 Series Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité