Grizzly G0923 Manuel utilisateur

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#AI20901 PRINTED IN CHINA V1.05.20

MODEL G0923

3D PRINTER

OWNER'S MANUAL

(For models manufactured since 05/20)

This manual provides critical safety instructions on the proper setup,

operation, maintenance, and service of this machine/tool. Save this

document, refer to it often, and use it to instruct other operators.

Failure to read, understand and follow the instructions in this manual

may result in fire or serious personal injury—including amputation,

electrocution, or death.

The owner of this machine/tool is solely responsible for its safe use.

This responsibility includes but is not limited to proper installation in

a safe environment, personnel training and usage authorization,

proper inspection and maintenance, manual availability and compre-

hension, application of safety devices, cutting/sanding/grinding tool

integrity, and the usage of personal protective equipment.

The manufacturer will not be held liable for injury or property damage

from negligence, improper training, machine modifications or misuse.

Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to the State

of California to cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement and other masonry products.

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you

do this type of work. To reduce your exposure to these chemicals:

Work in a well ventilated area, and work with approved safety equip-

ment, such as those dust masks that are specially designed to filter

out microscopic particles.

Table of Contents

INTRODUCTION............................................... 2

Contact Info.................................................... 2

Manual Accuracy ........................................... 2

Identification ................................................... 3

Controls & Components ................................. 4

Display ........................................................... 5

Glossary of Terms ......................................... 6

Machine Data Sheet ...................................... 7

SECTION 1: SAFETY....................................... 9

Safety Instructions for Machinery .................. 9

Additional Safety for 3D Printers ................. 11

SECTION 2: POWER SUPPLY ...................... 12

SECTION 3: SETUP ....................................... 14

Unpacking .................................................... 14

Inventory ...................................................... 14

Site Considerations ...................................... 15

Assembly ..................................................... 16

Test Run ...................................................... 17

Installing Software........................................ 17

SECTION 4: OPERATIONS ........................... 18

Operation Overview ..................................... 18

Preparing 3D Models ................................... 19

Navigating Slicer Software ........................... 20

Leveling Build Plate ..................................... 24

Preparing Build Plate ................................... 26

Preheating Nozzle........................................ 26

Printing ......................................................... 27

Changing Filament ....................................... 29

Cleaning Build Plate .................................... 30

Moving Axes ................................................ 30

SECTION 5: ACCESSORIES ......................... 32

SECTION 6: MAINTENANCE......................... 33

Schedule ...................................................... 33

Cleaning & Protecting .................................. 33

Lubrication ................................................... 33

SECTION 7: SERVICE ................................... 34

Troubleshooting ........................................... 34

Cleaning Nozzle ........................................... 37

Replacing Nozzle ......................................... 41

Cleaning Feeder & Bowden Tube ............... 43

Aligning Axis Pulleys .................................... 44

Updating Firmware....................................... 45

SECTION 8: WIRING...................................... 46

Wiring Safety Instructions ............................ 46

Internal Wiring Diagram ............................... 47

External Wiring Diagram .............................. 48

Wiring Images .............................................. 49

SECTION 9: PARTS....................................... 50

Main ............................................................. 50

Labels & Cosmetics ..................................... 52

WARRANTY & RETURNS ............................. 53

-2- Model G0923 (Mfd. Since 05/20)

We stand behind our machines! If you have ques-

tions or need help, contact us with the information

below. Before contacting, make sure you get the

serial number

and manufacture date from the

machine ID label. This will help us help you faster.

Grizzly Technical Support

1815 W. Battlefield

Springfield, MO 65807

Phone: (570) 546-9663

Email: [email protected]

We want your feedback on this manual. What did

you like about it? Where could it be improved?

Please take a few minutes to give us feedback.

Grizzly Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: [email protected]

Contact Info

We are proud to provide a high-quality owner’s

manual with your new machine!

made every effort to be exact with the

instruc-

tions, specifications, drawings, and photographs

in this manual. Sometimes we make mistakes, but

our policy of continuous improvement also means

that

sometimes the machine

you receive is

slightly different than shown in the manual

If you find this to be the case, and the difference

between the manual and machine leaves you

confused or unsure about something

check our

website for an updated version. W

e post

current

manuals and

manual updates for free

on our web-

site at

www.grizzly.com.

Alternatively, you can call our Technical Support

for help. Before calling, make sure you write down

the

Manufacture Date and Serial Number

from

the machine ID label (see below). This information

is required for us to provide proper tech support,

and it helps us determine if updated documenta-

tion is available for your machine.

Manufacture Date

Serial Number

Manual Accuracy

INTRODUCTION

Model G0923 (Mfd. Since 05/20) -3-

Identification

Become familiar with the names and locations of the controls and features shown below to better understand

the instructions in this manual.

To reduce risk of machine

damage and injury, read

this entire manual BEFORE

using machine.

Feeder

Head

Build

Plate

Control

Knob

Display

SD Card

Slot

Filament

Spool

Holder

-4- Model G0923 (Mfd. Since 05/20)

Controls &

Components

To reduce your risk of

serious injury, read this

entire manual BEFORE

using machine.

Feeder & Print Head

Refer to the following figures and descriptions to

become familiar with the basic controls and com-

ponents of this machine. Understanding these

items and how they work will help you understand

the rest of the manual and minimize your risk of

injury when operating this machine.

Controls

Figure 1. Printer controls.

A. Control Dial: Press control dial to open

menu or select menu item. Rotate control

dial to move through menu options or change

input value.

B. SD Card Slot: Printer reads G-code from SD

card to print objects.

C. Display: Shows print status and machine

menus. Refer to Display on next page for

more information.

Figure 2. Feeder components.

Figure 3. Print head.

D. Hobbed Gear: Rotates to push filament

through feeder towards print head.

E. Tensioner: Presses filament against feed

motor shaft.

F. Tension Adjust Screw: Adjusts tension that

presses filament against hobbed gear.

G. Bowden Tube: Prevents filament from bend-

ing and breaking as it enters print head.

H. Nozzle: Extrudes molten filament at fixed

diameter.

Model G0923 (Mfd. Since 05/20) -5-

Display

Figure 4. Display panel.

Print Speed

Percentage

Axis Locations

(X, Y, Z)

Elapsed Time

Print Progress

Target Temperature: Shows target nozzle tem-

perature during preheating, cooling, or printing.

Current Temperature: Shows current nozzle

temperature.

Print Speed Percentage: Shows print speed as

a percentage of value set in G-code.

Status: Displays status of printer.

Cooling Fan Speed: Shows speed of cooling fan

as a percentage of max speed.

Axis Locations: Shows current locations of each

axis.

Elapsed Time: Shows time since print began.

Print Progress: Shows approximate progress of

print as a progress bar.

Status

Target

Temperature

Current

Temperature

Cooling

Fan

Speed

-6- Model G0923 (Mfd. Since 05/20)

The following is a list of common definitions, terms and phrases used throughout this manual as they relate

to this 3D printer and 3D printing in general. Become familiar with these terms for assembling, adjusting or

operating this machine.

Glossary of Terms

Axis: Direction of movement. Three geometric

axes are typically X (left-right), Y (front-back) &

Z (up-down). In addition, G-code for 3D printers

has an E-Axis than describes the length of fila-

ment that moves through the extruder.

Bowden Tube: A flexible tube that guides fila-

ment from the feeder to the print head. Bowden

tubes are used in Bowden extruders, in which

the feeder is not directly mounted to the print

head.

Build Plate: A flat surface where the printer

deposits molten filament.

CAD (Computer-Aided Design): CAD software

is used to create a digital model of a project.

Extruder: The mechanism that pushes and pulls

filament and deposits it on the build plate,

including the feeder, heating elements, and

nozzle.

FFF (Fused Filament Fabrication): A 3D printing

process in which filament is extruded through a

heated print head and deposited on the object

being printed. Also known as FDM (fused

deposition modeling), a trademarked term for

the same process.

G-Code: A machine language that uses axis

points and commands.

Home Position: A fixed point on the machine set

with proximity switches. It is the zero point for

X, Y, and Z axes.

Hot End: The heated portion of the extruder

including heat sinks, heating block, and nozzle.

Infill: The interior material of a 3D printed object.

Can often be printed at a lower density than

the shell.

Nozzle: The component that funnels molten

filament out of the print head, usually made

of brass. The nozzle diameter determines the

width of extruded filament.

PLA: A popular material used for 3D printer fila-

ment because it is non-toxic, affordable, and

prints at a low temperature. It is often the first

choice for rapid prototyping.

Print Head: The assembly of components from

which filament is extruded. Often moves along

all axes, although in some printers the build

plate also moves.

Print Speed: Speed at which axis movement

occurs, typically measured in mm/s.

Resolution: Often referred to as "build resolution"

or "print resolution." It is the height of each layer

of printed material.

Support: Extra material printed in order to allow

overhangs and intricate geometry. Supports

are typically printed at low density and can be

removed from the object after printing.

Shell: The exterior surface of a 3D printed object.

Typically the first part of each layer to be

printed.

Slicer: Software that converts 3D models into

G-code by "slicing" the model into many layers

of movement commands.

STL: A common file type used to create and store

3D models.

Model G0923 (Mfd. Since 05/20) -7-

Page 1 of 2Model G0923

MODEL G0923

3D PRINTER

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

Product Dimensions:

Weight ............................................................................................................................................................................... 9 lbs.

Width (side-to-side) x Depth (front-to-back) x Height .......................................................................... 12-1/2 x 13-1/2 x 17 in.

Footprint (Length x Width) ............................................................................................................................ 13-1/2 x 12-1/2 in.

Shipping Dimensions:

Carton #1

Type.......................................................................................................................................................... Cardboard Box

Content................................................................................................................................................................ Machine

Weight .................................................................................................................................................................... 15 lbs.

Length x Width x Height...........................................................................................................................16 x 14 x 19 in.

Must Ship Upright........................................................................................................................................................

Yes

Electrical:

Power Requirement ........................................................................................................................ 120V, Single-Phase, 60 Hz

Full-Load Current Rating........................................................................................................................................................

Minimum Circuit Size ........................................................................................................................................................... 15A

Connection Type..............................................................................................................................Cord & Plug w/AC Adapter

Power Cord Included ............................................................................................................................................................Yes

Power Cord Length............................................................................................................................................. 5 ft. w/Adapter

Power Cord Gauge .......................................................................................................................................................

18 AWG

Plug Included ........................................................................................................................................................................Yes

Included Plug Type ..............................................................................................................................................................5-15

Switch Type ................................................................................................................................

Toggle Switch on AC Adapter

Motor:

X-Axis Stepper Motor

Frame Size ........................................................................................................................................................ NEMA 17

Amps ......................................................................................................................................................................... 1.5A

Speed ........................................................................................................................................................... 0 - 600 RPM

Type.................................................................................................................. Stepper (Brushless, Permanent Magnet)

Power Transfer............................................................................................................................................................Belt

Step Resolution .................................................................................................................................... 1.8 deg. Per Step

Y-Axis Stepper Motor

Frame Size ........................................................................................................................................................ NEMA 17

Amps ......................................................................................................................................................................... 1.5A

Speed ........................................................................................................................................................... 0 - 600 RPM

Type.................................................................................................................. Stepper (Brushless, Permanent Magnet)

Power Transfer............................................................................................................................................................Belt

Step Resolution .................................................................................................................................... 1.8 deg. Per Step

Machine Data Sheet

-8- Model G0923 (Mfd. Since 05/20)

Model G0923Page 2 of 2

Z-Axis Stepper Motor

Frame Size ........................................................................................................................................................ NEMA 17

Amps ......................................................................................................................................................................... 1.5A

Speed ........................................................................................................................................................... 0 - 600 RPM

Type.................................................................................................................. Stepper (Brushless, Permanent Magnet)

Power Transfer............................................................................................................................................................Belt

Step Resolution ....................................................................................................................................

1.8 deg. Per Step

E-Axis Stepper Motor

Frame Size ........................................................................................................................................................ NEMA 17

Amps ......................................................................................................................................................................... 1.5A

Speed ........................................................................................................................................................... 0 - 600 RPM

Type.................................................................................................................. Stepper (Brushless, Permanent Magnet)

Power Transfer............................................................................................................................................................Belt

Step Resolution ....................................................................................................................................

1.8 deg. Per Step

Main Specifications:

Printing Information

Maximum Build Volume............................................................................................................... 4-5/8 x 4-5/8 x 6-1/8 in.

XY Resolution.................................................................................................................................................12.5 micron

Layer Resolution ..................................................................................................................................... 40 - 250 micron

XY Precision...................................................................................................................................................12.5 micron

Z Precision .....................................................................................................................................................0.25 micron

Print Speed................................................................................................................................................ 50 - 100 mm/s

Number of Extruders .......................................................................................................................................................1

Nozzle Diameter....................................................................................................................................................0.4 mm

Filament Compatibility ................................................................................................................................................PLA

Filament Diameter ...............................................................................................................................................1.75 mm

Print File Type ......................................................................................................................................................GCODE

Software Information

Included Software....................................................................................................................................Grizzly Winware

Supported OS..................................................................................................................................................... Windows

Supported Object File Types.................................................................................................STL, OBJ, DAE, AMF, 3MF

Construction

Build Plate .............................................................................................................................................................. Plastic

Rails...........................................................................................................................................................................Steel

Other Related Information

Connectivity............................................................................................................................................... USB, SD Card

Display.............................................................................................................................................................3.2 in. LCD

Controls ...........................................................................................................................................................Rotary Dial

Build Plate Leveling................................................................................................................................. Factory Leveled

Print Technology ........................................................................................................................................................ FFF

Operating Temperature ............................................................................................................................50 - 104 deg. F

Storage Temperature ...............................................................................................................................50 - 104 deg. F

Other Specifications:

Country of Origin............................................................................................................................................................... China

Warranty........................................................................................................................................................................... 1 Year

Serial Number Location ................................................................................................................................................ ID Label

ISO 9001 Factory..................................................................................................................................................................

Yes

Features:

Portable Design w/Handle

Plastic Build Plate

Digital Display

Prints from PC via USB Cable or SD Card