Glowworm Xtramax HE Manuel utilisateur

www.high-efﬁciency.info

To be left with the user

Instructions for Use

002000****A.05.05

Glow-worm, Nottingham Road, Belper, Derbyshire. DE56 1JT

www.high-efﬁciency.info

High Efﬁciency Condensing Boilers

Xtramax HE

www.high-efﬁciency.info

WARNING

GAS LEAK OR FAULT

Turn off the gas emergency control valve immediately. Eliminate all sources of ignition, i.e.smoking,

blowlamps, hot air guns etc.Do not operate electrical lights or switches either on or off. Open all doors and

windows, ventilate the area.

SHEETMETAL PARTS

This boiler contains metal parts (components) and care should be taken when handling and cleaning, with

particular regard to edges.

SEALED COMPONENTS

Under no circumstances must the User interfere with or adjust sealed parts.

Customer service call: 01773 828100

Technical helpline: 01773 828300

General and Sales enquiries Tel: 01773 824639 Fax: 01773 820569

www.high-efﬁciency.info

Xtramax HE

www.high-efﬁciency.info

Important Information page 5

Boiler Design page 6

Boiler Safety Devices page 7

Maintenance page 8

Boiler Operation page 9

User Controls - Display page 10

CONTENTS

The instructions are an integral part of the boiler and must, to comply with the current issue of the Gas Safety

(Installation and Use) Regulations, be handed to the user on completion of the installation.

Please read these instructions and follow them carefully for the safe and economical use of your boiler.

www.high-efﬁciency.info

Gas Safety (Installation and Use) Regulations

In your own interests and that of safety, it is the Law that ALL gas

appliances are installed by a competent person in accordance

with the current issue of the regulations.

Control of Substances Hazardous to Health

Under Section 6 of The Health and Safety at Work Act 1974, we

are required to provide information on substances hazardous to

health.

The adhesives and sealants used in this appliance are cured and

give no known hazard in this state.

Electrical Connection

The boiler MUST be earthed.

The boiler MUSTbe connected to a permanent 230V ac, 50Hz

supply.

Connection of the whole electrical system of the boiler, including

any heating controls, to the electrical supply must be through one

common isolator and must be fused 3 Amp maximum.

The colours of three core ﬂexible cable are, blue - neutral, brown

- live, green and yellow - earth.

IMPORTANT NOTE

ALL electrical connections to the boiler

must be permenantly ﬁxed to a wall or a

sturdy support feature.

Gas Category

This boiler is for use on G20 natural gas, but may be adjusted for

use on G31 propane.

Testing and Certiﬁcation

This boiler certiﬁcated to the current issue of EN 483 for perform-

ance and safety.

It is important that no alteration is made to the boiler unless ap-

proved, in writing, by Glow-worm.

Any alteration not approved by Glow-worm, could invalidate the

certiﬁcation, boiler warranty and may also infringe the current issue

of the statutory requirements.

CE Mark

This boiler meets the requirements of Statutory Instrument, No. 3083

The Boiler (Efﬁciency) Regulations, and therefore is deemed to meet

the requirements of Directive 92/42/EEC on the efﬁciency requirements

for new hot water boilers ﬁred with liquid or gaseous fuels.

Type test for purposes of Regulation 5 certiﬁed by: Notiﬁed body

0087.

Product/production certiﬁed by: Notiﬁed body 0086.

The CE mark on this appliance shows compliance with:

1. Directive 90/396/EEC on the approximation of the laws of the

Member States relating to appliances burning gaseous fuels.

2. Directive 73/23/EEC on the harmonisation of the Laws of the

Member States relating to electrical equipment designed for use

within certain voltage limits.

3. Directive 89/336/EEC on the approximation of the Laws of the

Member States relating to electromagnetic compatibility.

Important Information

www.high-efﬁciency.info

Boiler Design

Description

Xtramax HE Model: The boiler is designed to provide central

heating and instantaneous hot water.

Once the controls are set the boiler operates automatically.

Compartment or Cupboard Installations

Ventilation is not required for compartment or cupboard

installations.

Do not use the compartment or cupboard for storage.

The minimum clearances to ﬁxtures are shown in

diagram 1.

Pluming from ﬂue terminal

Like all condensing boilers it will produce a plume of

condensation from the ﬂue terminal in cool weather. This is

due to the high efﬁciency and hence low ﬂue gas temperature

of the boiler. It is normal and not a fault indication.

Electrical Supply Failure Reset Switch

The boiler will not work without an electrical supply.

Normal operation of the boiler should resume when the

electrical supply is restored.

Reset any external controls, to resume normal operation of

the central heating.

If the boiler does not resume normal operation turn the mains

reset switch off and on. If the boiler does not resume normal

operation after this the overheat stat may have operated.

+ A removable compartment door can be placed

at least 5mm in front of the appliance

600 +

200

Diagram 1

www.high-efﬁciency.info

Boiler Safety Devices

Overheat Reset

The boiler software is designed to recognise the potential for

an overheat lockout and will shutdown before this happens.

To restart the boiler. Turn the mains reset switch 0, wait for

ﬁve seconds, turn mains reset switch to I, the boiler is reset,

see diagram 2.

If, however the boiler fails to resume normal operation and

all services and demands are calling for duty then call your

Installation/Servicing company.

Overheat Lockout

In the event of the boiler overheating the safety device will

shutdown the boiler. If this happens, call your Installation/

Servicing company.

Frost Protection

The boiler has a built in frost protection programme as long

as the electricity and gas are left switched on. This device

operates the burner and system pump when the temperature

in the heating circuit falls below 40C.

When the temperature inside the boiler rises to 70C the

burner will switch off and only the system pump will run, at

100C the pump will switch off as frost protection will no longer

be required.

NOTE: Any other exposed areas of the system should be

protected by a separate frost thermostat.

Condensate Drain Blockage

As a safety feature the boiler will stop working if the condensate

drain becomes blocked. During freezing conditions this may

be due to the forming of ice in the condense drain external

to the house. Release an ice blockage by the use of warm

cloths on the pipe. The boiler should then restart. Contact

your installation/servicing company if the fault persists.

Safety Discharge Valve

A safety discharge valve and discharge pipe is ﬁtted to the

boiler. This valve MUST not be touched. If there is any

discharge from the pipe, switch off the boiler electrical supply,

then call your Installation/Servicing company.

Diagram 2

www.high-efﬁciency.info

Spare Parts

REMEMBER: When replacing a part on this boiler, use only

spare parts that you can be assured conform to the safety

and performance speciﬁcation that we require. Do not use

reconditioned or copy parts that have not been clearly

authorised by Glow-worm.

If replacement parts are required contact Glow-worm’s own

service organisation using the telephone number on the inside

front cover of this booklet.

Please quote the name of the boiler, this infomation will be

on the name badge on the front case.

If in doubt seek advice from the local gas company or

Glow-worm’s own service organisation using the telephone

number on the inside front cover of this booklet.

Servicing

To ensure the continued efﬁcient and safe operation of the

boiler it is recommended that it is checked and serviced at

regular intervals. The frequency of servicing will depend upon

the site conditions and usage, but in general, once a year

should be enough.

If this boiler is installed in a rented property in the UK there

is a duty of care imposed on the owner of the property by

the current issue of the Gas Safety (Installation and Use)

Regulations, Section 35.

Servicing/maintenance should be carried out by a

competent

person inaccordance with the rules in force in the countries

of destination.

To obtain service, please call your installer or Glow-worm’s

own service organisation using the telephone number on the

inside front cover of this booklet.

Cleaning

The boiler casing can be cleaned using a mild liquid detergent

with a damp cloth, then a dry cloth to polish.

Do not use any form of abrasive or solvent cleaner as you

may damage the paintwork.

Frost Protection

If the mains electricity and gas services are to be turned off for

any long periods during severe weather, it is recommended

that the whole system, including the boiler, should be drained

to avoid the risk of freezing.

Maintenance

www.high-efﬁciency.info

1. Check that all isolating valves are open, see diagram 5 and water ﬂows from the hot water taps.

2. If you are in any doubt about the boiler being ﬁlled with water contact your installer or Glow-worm's own

service organisation using the telephone number on the inside front cover of this booklet.

Do not operate the boiler without water.

3. Check that the electrical supply to the boiler is ON and set any remote controls as required.

4. With the User controls in their "OFF" (0) positions, turn the Mains Reset Switch to the ON (1) position,

the running lamp will initially illuminate (green) then go off, the system pressure will be displayed and should read

on the digital display, at least 0.7bar (recommended 1.0bar), if less, pressurise as described in the Digital/Display

System Pressurisation section.

Digital Display/System Pressurisation

The digital display, see diagram 4, normally shows the operating temperature of the unit when there is a central heating demand

and gives a pressure reading when there is no demand or when the appliance is in the domestic hot water mode.

If the digital display shows pressure less than 0.7bar, re-pressurise the system to 1bar by gently opening the built in ﬁlling tap

underneath the boiler, see diagram 3. A tap extension tool is provided to facilitate this. Ensure the tap is closed. If the system

repeatedly looses pressure, YOU MUST CONTACT YOUR INSTALLER OR GLOW-WORM'S OWN SERVICE ORGANISATION

USING THE TELEPHONE NUMBER ON THE INSIDE FRONT COVER OF THIS BOOKLET.

If there is a fault, then a fault symbol displays and the control light on the control panel ﬂashes red.

WARNING: Never try to service or repair the appliance by yourself and only start the appliance once a skilled professional has

repaired the fault.

Boiler Operation

Diagram 3 Diagram 5

Diagram 4

Tap Extension Tool

Filling Tap Isolating Valves

Shown Closed

www.high-efﬁciency.info

User Controls - Display

CENTRAL HEATING CONTROL

1. Turn the central heating water temperature control "ON", the lighting sequence will begin, the running lamp will

illuminate (green) to indicate the boiler has lit, the system temperature will now be displayed instead of

system pressure.

The temperature of the central heating water can be adjusted by turning the central heating water temperature

control to desired setting between 1 'Min' and

°C

bar

'Max'. Maximum setting is appoximately 82°C.

Set the control to '0' to switch off heating.

If the boiler fails to light, reset the controls, see paragraph below, TO RESET

If a fault occurs the running lamp will ﬂash red and a fault code will appear on the digital display.

DOMESTIC HOT WATER CONTROL

2. Position 0 - hot water OFF. Turn hot water temperature control to maximum.

TO RESET

3. Turn the Mains Reset Switch to 0, wait for 5 seconds, turn Mains Reset Switch to 1, the boiler is reset.

If the fault persists contact your installer/service provider using the telephone number on the inside font cover of

this booklet.

TO TURN THE BOILER OFF

4. Turn the Mains Reset Switch to the OFF (0) position.

Turn the gas supply OFF at the gas service cock if the boiler is to be out of use for some time.

Autres manuels pour Xtramax HE

Table des matières

Autres manuels Glowworm Chaudière

Glowworm

Glowworm Economy Plus C 40 Manuel d'utilisation

Glowworm

Glowworm Hideaway 50B Manuel utilisateur

Glowworm

Glowworm ultracom hxi Manuel utilisateur

Glowworm

Glowworm Economy Plus 50C Manuel d'utilisation

Glowworm

Glowworm Easicom 3 24c Manuel utilisateur

Glowworm

Glowworm Energy7 Series Manuel utilisateur

Glowworm

Glowworm swift flow 100e Manuel utilisateur

Glowworm

Glowworm Energysaver 70 Manuel d'utilisation

Glowworm

Glowworm MicraCom 24c-AS/1 Manuel utilisateur

Glowworm

Glowworm 12hxi Guide de l'utilisateur

Glowworm

Glowworm 12hxi Manuel d'utilisation

Glowworm

Glowworm icon 23t Manuel

Glowworm

Glowworm Ultimate 60FF Manuel d'utilisation

Glowworm

Glowworm Space Saver K-F-B 30 Guide de l'utilisateur

Glowworm

Glowworm Economy Plus 41 319 04 Note de version

Glowworm

Glowworm SwiftFlow 120 Guide de l'utilisateur

Glowworm

Glowworm 30ci Manuel utilisateur

Glowworm

Glowworm Micron 60FF Manuel d'utilisation

Glowworm

Glowworm SUSTAIN 25c -A Manuel utilisateur

Glowworm

Glowworm 100sxi Fiche technique

Glowworm

Glowworm swift flow 80 Manuel utilisateur

Glowworm

Glowworm Ultracom 2 24cxi Manuel utilisateur

Glowworm

Glowworm Jaguar 23 kW Manuel

Glowworm

Glowworm Ultracom 24cxi Manuel utilisateur

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Viessmann

Viessmann VITODENS 200 Mode d’emploi

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur