Genius E5000 Manuel

Hardware Installation

1. You can connect the receiver to a USB port of a PC

2. Install two AA batteries in the mouse.

3. Turn on your computer.

4. After you open Windows, please press

the button on the receiver first and

then press the button under the mouse

for channel setting.

Important: You can use the battery charger

receiver to recharge two AA each time

when you use the PC. Plug the battery

charger receiver USB connector into the

PC directly and remember do not put the batteries in the wrong direction, use the

same types of batteries, and do not recharge via the USB hub, that will make your

receiver, main-board and hub burn or become non-usable easily. Also, keep all

drinks away! If any spill occurs on the receiver, unplug the USB connector first and

clean the receiver immediately. Please remove the batteries if you do not use this de-

vice for at least two weeks.

Warning: (Troubleshooting)

1. Please do not use Wireless optical mouse on a desk which is made of glass, mir-

ror, iron, or black velvet. Also, a flat surface is necessary or the Optical Sensor

will error easily. When you use Wireless optical mouse on a desk that is made of

metal, try using a pad and reduce the receiving distance.

2. Before the first installation is completed (channel setting ready), the mouse will

not work.

3. The Wireless optical mouse channel provides 256 ID-codes, and it automatically

selects the ID # for your mouse. You can only set up one Wireless optical mouse

at a time. But if you have additional Wireless optical mouse sets in an area of 10

square meters, more interference will occur between the receiver and your

mouse.

ENGLISH

4. If you feel the mouse does not move smooth as usual, then the batteries have lost

their charge, so please replace them. Also, the wireless icon will be blinking

“red” when there is a battery-low situation. The LED on the receiver shows the

battery-recharging status (from shining to LED completely “on” for battery full).

You should set up the channel every time you replace the batteries.

5. If you need to buy new batteries, please choose Ni-MH (Nickel-Metal-Hydride)

AA batteries, 1.2V, 1300 to 1600 mAH. Please do not mix or use other types

of batteries (Li-ion, Ni-Cd, Alkaline, etc.)

6. The Wireless optical mouse with radio frequency gives you free movement and

an enjoyable experience. For optimal performance, place the receiver at least 8

inches (about 20 cm) away from the mouse and other electrical devices, such as

the computer, monitor, and etc.

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the Setup disk (or CD) into the disk drive.

3. Follow the instructions on the screen to finish the software installation.

Factory Setting

10 “One Touch” keys for fast access to multimedia, the Internet, and the application

switch.

Button Assignments

The Button Assignment feature lets you work in a more

efficient way because you can assign the most frequently

used commands in Windows to the mouse buttons.

1. Left Button: Provides traditional mouse functions

like click, double click and drag.

2. Right Button: You can assign this button to fre-

quently used keyboard and mouse functions in addi-

tion to features like Easy Jump, Auto-Panning,

Zoom, etc.

3. Magic-Roller: Press the “Magic-Roller” to surf the

Internet and Windows documents

4. Back: See previous page when viewing the Internet

5. Forward: Go to next page when viewing the Internet

6. WWW: Open browser (Netscape or IE)

7. Play & Pause: Play and pause of audio or video CD’s

8. Vol. +: Increase volume

9. Vol. -: Decrease volume

10. Application Switch: You can switch between active programs and documents

Table des matières

Autres manuels Genius Souris

Genius

Genius ERGO 520 Manuel utilisateur

Genius

Genius NAVIGATOR 365 LASER Manuel utilisateur

Genius

Genius Ergo 8200S Manuel utilisateur

Genius

Genius GX Gaming Series Manuel utilisateur

Genius

Genius Navigator 525 Laser Manuel utilisateur

Genius

Genius NAVIGATOR 900 Manuel utilisateur

Genius

Genius NAVIGATOR R820BT Manuel utilisateur

Genius

Genius TRAVELER 320 Manuel utilisateur

Genius

Genius Micro Traveler 900LS Manuel utilisateur

Genius

Genius TRAVELER 100V Manuel utilisateur

Genius

Genius ERGO 525 Manuel utilisateur

Genius

Genius NX-7000SE Manuel utilisateur

Genius

Genius TRAVELER T925 LASER Manuel utilisateur

Genius

Genius MICRO TRAVELER 300 Manuel utilisateur

Genius

Genius NAVIGATOR 620 Manuel utilisateur

Genius

Genius NX-8006S Manuel utilisateur

Genius

Genius ERGO 325 LASER Manuel utilisateur

Genius

Genius NAVIGATOR 535 Manuel utilisateur

Genius

Genius M8-610 Manuel utilisateur

Genius

Genius NAVIGATOR 700 Manuel utilisateur

Genius

Genius Traveler 9020BT Manuel utilisateur

Genius

Genius N5000 Instructions de montage

Genius

Genius GM-130024/T Manuel

Genius

Genius ERGO 300 Manuel utilisateur

Manuels Souris populaires d'autres marques

Sven

Sven RX-G720 Manuel utilisateur

3DConnexion

3DConnexion CadMouse Pro Manuel utilisateur

Canyon

Canyon Puncher GM-20 Manuel utilisateur

Sharkoon

Sharkoon Light2 180 Manuel utilisateur

Cherry

Cherry MW 8C ERGO Manuel utilisateur

NGS

NGS HIT RB Manuel utilisateur

Sharkoon

Sharkoon FireGlider Manuel utilisateur

Lenovo

Lenovo Wireless Mouse N3902 Manuel utilisateur

BASETech

BASETech BN-S11 Manuel utilisateur

Dell

Dell WM326 Manuel utilisateur

Areson

Areson B213 Manuel utilisateur

HP M17587-371 Manuel utilisateur

Chatpen

Chatpen CHA-30 Manuel utilisateur

GAMDIAS

GAMDIAS DEMETER GMS5000 Manuel utilisateur

HP KJ453AA - Wireless Laser Mouse Manuel utilisateur

Trust

Trust GRAPHIN GXT 960 Manuel utilisateur

Lenovo

Lenovo SD-9082 Manuel utilisateur

Alienware

Alienware AW320M Manuel utilisateur