General LCR318 Manuel utilisateur
MINI HYGRO-
THERMOMETER
USER’S MANUAL
LCR318
Please read this manual carefully and thoroughly
before using this product.
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 1
INTRODUCTION
Thank you for purchasing General Tools & Instruments’
CR318 Mini Hygro-Thermometer. Please read this
user’s manual carefully and thoroughly before using
the product.
The CR318 is an ideal instrument for monitoring the
humidity and temperature environment of pianos,
humidors, wine cellars, musical instrument cases and
computer rooms.
KEY FEATURES
• Simultaneously displays indoor temperature (in °F)
and relative humidity (RH) as a percentage
• Min and Max temperature and humidity memory
• arge CD
• ow battery warning
2
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 2
• Foldaway stand for desk mounting; also can be
wall-mounted
• Includes battery
• CE approved
WHAT’S IN THE BOX
The CR318 comes in a box along with:
• A preinstalled “ R44” battery with an activation tab
• This user’s manual
SETUP INSTRUCTIONS
ACTIVATE THE UNIT
If you are reading this, you have already removed the
unit from the bubble-wrap bag. Peel away the film
protecting the display.
3
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 3
To activate the nit:
1. Open the battery compartment (marked OPEN) on the
right side of the back of the unit by sliding its cover
down, in the direction of the arrow stenciled on it.
2. Remove the black activation tab under the R44
button battery. Discard the tab.
3. Install the battery in the well so its rounded side faces
down and its flat side (marked “ R44”) faces up. The
battery does not snap into place, so do not apply
downward pressure.
4. Replace the battery compartment cover by sliding it
up, in the direction opposite the arrow on it. The
pressure of the cover is what holds the battery in
place.
4
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 4
MOUNT THE UNIT
To leave the nit free to move on a horizontal
s rface, lift the foldaway stand on the back of the unit
by placing your fingertip in the recess on the bottom
edge of the unit.
To attach the nit to a wall or vertical s rface, obtain
a pair of Velcro strips and—without separating them—
trim them to a size of 1-3/4 in. by 3/8 in., or slightly
smaller than the recessed rectangular mounting area on
the top rear of the unit. Remove the paper backing from
one strip and press its exposed sticky side into the
recess. Remove the paper backing from the other strip
and press the unit against the wall or surface at the
desired position.
To detach the nit in order to change the battery, grab
it and pull until the two Velcro strips separate.
5
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 5
OPERATING INSTRUCTIONS
By default, the unit displays the current ambient
temperature on the left readout and the current RH level
on the right readout.
To display the highest temperat re and RH val es
measured since the unit was last reset, press the
MAX/MIN button on the right side of the front panel
once. The values will appear for 7 seconds, along with
the term MAX in the upper right corner. After 7 seconds,
the display will return to showing real-time temperature
and RH values.
To display the lowest temperat re and RH val es
measured since the unit was last reset, press the
MAX/MIN button twice. The values will appear for
7 seconds, along with the term MIN in the upper right
corner. After 7 seconds, the display will return to
showing real-time temperature and RH values.
6
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 6
To reset the temperat re and h midity memory,
press the CLEAR button on the front panel.
SPECIFICATIONS
Temperature Measurement Range: 14° to 140°F
Temperature Measurement Accuracy: ±1.8°F
Relative Humidity Measurement Range: 10 to 99%
RH Measurement Accuracy: ±5% of reading
Temperature Resolution: 1°
RH Resolution: 1%
Display Size: 1.4 x 0.7 in.
Dimensions: 1.5 x 2.05 x 0.6 in. (38 x 52 x 15mm)
Power Source: 1 “ R44” battery (included)
7
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 7
WARRANTY INFORMATION
General Tools & Instruments’ (General’s) CR318
Mini Hygro-Thermometer is warranted to the original
purchaser to be free from defects in material and
workmanship for a period of one year. Subject to certain
restrictions, General will repair or replace this
instrument if, after examination, the company
determines it to be defective in material or
workmanship.
This limited warranty does not apply to damages that
General determines to be from an attempted repair by
non-authorized personnel or misuse, alterations, normal
wear and tear, or accidental damage. The defective unit
must be returned to General Tools & Instruments or to a
General-authorized service center, freight prepaid and
insured.
8
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 8
RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a
reliable product of superior quality. However, in the
event your instrument requires repair, please contact
our Customer Service to obtain an RGA (Return Goods
Authorization) number before forwarding the unit via
prepaid freight to the attention of our Service Center at
this address:
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
Remember to include a copy of your proof of purchase,
your return address, and your phone number and/or
e-mail address.
9
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 9
NOTES
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
10
LCR318 Manual FINAL_prin 020713_awb 2/7/13 10:25 AM Page 10
Autres manuels pour LCR318
1
Table des matières
Autres manuels General Thermomètre
General
General IRT102 Manuel utilisateur
General
General IRT105 Manuel utilisateur
General
General DT4947SD Manuel utilisateur
General
General IRT2 Manuel d'installation
General
General Heat Seeker IRT207 Manuel utilisateur
General
General DT310LAB Manuel utilisateur
General
General IRT203 Manuel utilisateur
General
General DT61 Manuel utilisateur
General
General IRT675 Manuel utilisateur
General
General IRT670 Manuel utilisateur
General
General AQ150 Manuel utilisateur
General
General IRT-206 Manuel utilisateur
General
General IRT659K Manuel utilisateur
General
General IRT850K Manuel utilisateur
General
General DTR900 Manuel utilisateur
General
General IRT656 Manuel utilisateur
General
General IRT3 Manuel utilisateur
General
General IRT855DL Manuel utilisateur
General
General DT8852 Manuel utilisateur
General
General IRT730K Manuel utilisateur
