Gefen SW-4007 Manuel utilisateur
6x2 HDMI
Switcher
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 884-6294
(800) 545-6900
Fax (818) 884-3108
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
C/O Customer Service
6265 Variel Ave.
Woodland Hills, CA91367-9897
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
6x2 HDMI Switcher is a trademark of Gefen Inc.
HDMI is a trademark of hdmi.org
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Front Panel Description
Back Panel Description
Connecting and Operating the 6x2 HDMI Switcher
RMT6-IR Installation
Dip Switch Guidelines
RS-232 Interface
Rack Mount Diagram
Specifications
Warranty
1
2
3
4
5
6
7
8
9
10
11
Congratulations on your purchase of the ex•tend•it 6x2 HDMI Switcher. Your complete
satisfaction is very important to us.
Gefen’s line of HDTV switches, extenders, and splitters are designed to make yourA/V
equipment use more comfortable, more productive and less expensive.
The 6x2 HDMI Switcher allows access to six HDTV devices, using two HDTV displays.
Both output displays will have mirrored images. Also included is a TOSLINK output that
will output the HDMI digital audio signal in Toslink digital audio form.
The ex•tend•it line offers solutions for Home Theater, AV installation, noise, space and
security concerns, data center, information distribution, conference room presentation,
school and corporate training environments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime support from a team of outstanding engineers.
The ex•tend•it 6x2 HDMI Switcher allows six HDTV HDMI devices to be switched eas-
ily in to two HDTV HDMI compatible monitors or projectors. Simply connect your HDTV
displays to the Switcher’s display outputs. The 6x2 HDMI Switcher can also be placed
at the end of a long HDMI cable to regenerate the HDMI signal.
INTRODUCTION
1
FEATURES
Features
• Switches easily between any six HDMI sources
• Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions
• Maintains highest HDMI single link video resolution
• Maintains highest HDMI digital audio signal
• Includes TOSLINK output for easy hookup to digital audio systems
• Supports HDCP compliant devices
• HDMI or DVI to HDMI cables are used to connect the inputs and switcher output
• Inputs can be switched with the IR remote control, contact closure controller or
through the RS232 connector.
• Installs in seconds
Includes:
(1) 6x2 HDMI Switcher
(6) 6’ HDMI cables (m-m)
(1) 24VDC Power Supply
(1) RMT6-IR
(1) Rack Ears
(1) Manual
2
FRONT PANEL DESCRIPTIONS
IR eye
Indicates if input
1,2,3,4,5, or 6 is
selected
3
IR Extender
Eye Port
BACK PANEL DESCRIPTIONS
Connects to
24VDC power
supply
4
RS232
Controller
Port
HDMI In 1
HDMI Out 1
HDMI In 2 HDMI Out 2
TOSLINK
Optical Out
HDMI In 3
HDMI In 4
HDMI In 5
HDMI In 6
CONNECTING AND OPERATING THE 6x2 HDMI SWITCHER
How to Connect the 6x2 HDMI Switcher to your devices
1 Connect the supplied cables from the HDTV sources into the 6x2 HDMI Switcher inputs.
2Connect the cable from your display (monitor or projector) into the HDMI outs of the
6x2 HDMI Switcher.
3 Connect any Digital Audio Receiver into the Toslink out of the 6x2 HDMI Switcher
3 Plug the 5VDC power supply into the 6x2 HD Switcher.
How to enable the TOSlink on the 6x2 HDMI Switcher
The TOSlink audio out is only enabled if you are using an HDMI source and an HDMI
display, otherwise the source goes into DVI mode by reading the DVI display EDID. If
you are using a DVI display you will have to open the switcher box to access the dip
switches and flip dip switch #2 (refer to page 7) to enable the TOSlink audio out. If you
are using both an HDMI and DVI display, make sure you have the HDMI display on
output 1 to enable the TOSlink audio out.
How to Control the 6x2 HDMI Switcher
Use the RMT6-IR remote control to toggle between sources.
5
6
RMT6-IR INSTALLATION
1. Remove battery cover from the back of the RMT6-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT6-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will flash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT6-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
7
DIP SWITCH GUIDELINES
Inside the 2X2 HDMI Switcher is a bank of Dip Switches. Below is a table describing
their functions. By default, all switches are set to the Off position.
Dip Switch # Name Description
1 Switching Delay Adds a 3 second delay to switching
2 On Board EDID Feeds a Generic HDMI EDID to all Inputs
3 IR Code Dip Switch Corresponds to Dip Switch 1 on RMT16-IR
4 IR Code Dip Switch Corresponds to Dip Switch 2 on RMT16-IR
5 Unused
6 Unused
7 Unused
8 Edge Select +Edge Pixels
How to open the 2x2 HDMI Switcher:
To access the dip switches, first remove the 2 hex nuts on the back of the unit (2 for
RS232 port). Remove the 5 Philips screws under the unit and the 4 screws on each
side of the unit. Now carefully remove the cover of the 2x2 HDMI Switcher.
2345678
1
Table des matières
Autres manuels Gefen Changer
Gefen
Gefen EXT-DPKVM-441 Manuel utilisateur
Gefen
Gefen 4x1 DVIKVM Switcher series Manuel utilisateur
Gefen
Gefen EXT-VGA-142N Manuel utilisateur
Gefen
Gefen EXT-DP-841 Manuel utilisateur
Gefen
Gefen EXT-DVIK-MV-41 Manuel utilisateur
Gefen
Gefen HDTV-441 Manuel utilisateur
Gefen
Gefen MINIDVI-241 Manuel utilisateur
Gefen
Gefen ex tend it Manuel utilisateur
Gefen
Gefen DVI-841 Manuel utilisateur
Gefen
Gefen GTV-AUDDEC-N Manuel utilisateur
Gefen
Gefen EXT-DVIK-MV-441 Manuel utilisateur
Gefen
Gefen Multiview EXT-HD-MVSL-441 Manuel utilisateur
Gefen
Gefen USB-241 Manuel utilisateur
Gefen
Gefen EXT-HDMI1.3-244 Manuel utilisateur
Gefen
Gefen EXT-MINIDVI-241N Manuel utilisateur
Gefen
Gefen GTV-AUDDEC-N Manuel utilisateur
Gefen
Gefen GTVGTV-HDMI1 Manuel utilisateur
Gefen
Gefen EXT-DVIKVM-441DL Manuel utilisateur
Gefen
Gefen TSE241 Manuel utilisateur
Gefen
Gefen VGA-422 Manuel utilisateur
