Furuno TZT12F Manuel
Icon (home/displays), power switch operations
Operational Overview
How to select a display
MULTI FUNCTION DISPLAY
TZT12F/TZT16F/TZT19F
Operator’s Guide
Model
This guide provides the basic operating procedures for this equipment. For detailed information, see the Operator’s
Manual on the WEB site. You can get the latest version of the manual by accessing the quick response code at the
back of this guide. Connection of sensors required.
iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and product
names are trademarks, registered trademarks or service marks of their respctive holders.
The screenshots used in this guide were mainly taken from the TZT19F.
Power switch
Power switch
- Turns on power
- Shows [Quick Access] window.
Power offPower offPower off
Power offPower off
Device: Powers off
this unit.
Network: Powers off
all NavNet TZtouch3
units in network.
Day
Swipe downward from top of display
Quick pageQuick pageQuick page
Quick pageQuick page
Home screenHome screenHome screen
Home screenHome screen
Displays the
home screen.
Home icon
Home icon
Display icons
(max. 16 on home screen)
Home screenHome screenHome screen
Home screenHome screen
Long tap a display icon to edit, delete, resize, or
change its location.
Display icon long tapped
Edit Delete
Size
(large or
small)
Tap
“eGuide” provides
an abbreviated
operator’s guide.
How to edit a display icon
How to edit a display icon
Tap a display icon on the home screen
Tap a display icon on the home screen
OR
OR
Tap a display icon on the quick page
Tap a display icon on the quick page
www.furuno.com
Tap
Brilliance, Hue
Brilliance, HueBrilliance, Hue
Hue:
Brilliance:
Tap
TZT12F
䠄Right side of the Panel䠅
TZT12F
䠄Right side of the Panel䠅
Tap
TZT16F/TZT19FTZT16F/TZT19F
Touchscreen operations
Tap
- Select an item on a menu.
- Select an object to show the corresponding
pop-up menu.
- Move the chart.
- Scroll the menu.
- Show slide menu, layer menu.
Zoom in Zoom out
Do the function assigned to
[Function Gesture] in the
[Settings] - [General] menu.
Drag, swipe
Pinch Two finger tap
Menu operation
- Zoom in, zoom out the plotter
and weather displays.
- Change the range on the radar
display.
Slider barSlider barSlider bar
Slider barSlider bar
Drag
Tap operation also
available.
Pop-up menu
Tap screen (applicable
point, object, etc.)
Tap the required function.
(”>” indicates additional options.)
Layer menu
Tap the required function.
Slide-out menu
Tap the required function.
Slide menuSlide menuSlide menu
Slide menuSlide menu
Swipe leftward from the right edge. Icon color and function state
Yellow: ON, White: OFF
Tap the [Home] icon.
Tap [Settings].
Drag menu to find required
item, then tap item.
Tap the required option.
Settings menu
Two finger drag
Change the viewpoint
position on the 3D display.
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Swipe upward from
the bottom edge.
Layer menuLayer menuLayer menu
Layer menuLayer menu
2
2
Pop-up menuPop-up menuPop-up menu
Pop-up menuPop-up menu
33
Plotter
Swipe from the left edge of the screen rightward to show the data area at the left edge of the screen.
To hide the data area, swipe oppsite direction.
Data Area (Data Box)Data Area (Data Box)
Data area COG vector (broken line)COG vector (broken line)
Heading line
(yellowish-green solid line)
To add a data box;To add a data box;
Data box settings
Alarm MessageAlarm Message
Display range
Track
Return own ship
to screen center.
Orientation Mode
Switch between
NU and HU.
Switch between 2D
and 3D. (Drag upward
with two fingers also.)
2D: 3D
3D: 3D
Boat iconBoat icon
Inactive route
(sleeping)
(Departure or
arrival point,
selectable on
[Layers] menu.)
Point
Inactive route
(expanded)
Position Lost
Left: Undo
Right: Back
Slide bar
Long tap the data box to show
[Edit NavData] display.
Long tap the data box to show
[Edit NavData] display.
11
11Tap empty space on
the data box or
[+Add NavData].
Tap empty space on
the data box or
[+Add NavData].
2
2Tap a data
to add.
2
2
Ta
p
a dataTa
p
a data
o add.
to add.
Tap
Tap
Long
tap
Tap
Tap [Close] to finish.Tap [Close] to finish.
To delete a data box, or
change the displayed data;
To delete a data box, or
change the displayed data;
11
Tap
22
Tap
11Tap the data box to
delete or change.
Tap the data box to
delete or change.
22To delete the data box: Tap
the [Delete].
To change the data: Tap the
data to display.
To delete the data box: Tap
the [Delete].
To change the data: Tap the
data to display.
Tap
Tap [Change Type]
to change the data
display method
among Graphic
(analog), Numeric
(digital) and Graph.
Tap [Change Type]
to change the data
display method
among Graphic
(analog), Numeric
(digital) and Graph.
Grip icon: Drag the grip icon to
move the data box.
Grip icon: Drag the grip icon to
move the data box.
4
4
Points/boundaries
Points can be entered on the plotter display (radar and fish finder displays also) to mark important locations such as
a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the points list.
Also, boundaries can be set at the position desired (net position, area to avoid, etc.)
Tap where to enter a point.
The point is entered
on the screen.
Tap a point or the location
to set as destination.
On-screen point Selected location
On-screen point
On-screen point
Points list
Points list
How to enter a point
Yellow line:
Shortest course from own
ship to the destination.
Purple line
(with arrow): Indicates
course to go to the
destination.
How to set a point as destination
Tap [Lists] on the
home screen.
Destination point
Lists
If a point was tapped.
NoticeNoticeNotice
NoticeNotice
Note: [Find on Chart] puts the
selected point at the screen center.
Sort the list by date, name, icon, color, range.
Tap the point to set as the destination.
Tap the point to set as the destination.
How to set a boundary
Tap the position where to
set a boundary. Tap the shape to use for
the boundary.
[Area]/[Line]: Tap neces-
sary points to complete
the boundary, referring to
"Route" on the next page.
[Circle]: Drag icons to
adjust the size and
position, and then tap
[End Boundary].
55
Routes
A route is comprised of a series of waypoints leading to a destination. Routes are saved to the
routes list.
On-screen routeOn-screen route
Routes listRoutes list
Tap the first point for
the route.
At the last point
Tap the next point for the route.
Repeat to enter all points for the route.
How to create a new route
How to follow a route
Tap a leg of the route.
T
l
f
t
h
t
Home screen
Sort list by date, name, color, length or range.
Tap the route.
Enter a name for the route, then tap [ ].
(Top right corner)
Lists
1st point
(route start point)
1st point
(route start point)
Last pointLast point
6
6
Radar
How to switch between standby and TX
How to switch between standby and TX
Tap to switch between
automatic and manual.
Drag the
slider/tap the
slider bar to
adjust.
How to adjust the gain / sea clutter / rain clutter
How to adjust the gain / sea clutter / rain clutter
TX
X
Tap
: Standby
: TX
TX
TX
Tap
“A” means automatic adjustment
“M” means manual adjustment
(At bottom of data area)
(Top right corner)
Radar Control
Data
area
Own ship position
Own ship position
Heading line
Heading line
Guard zone
Guard zone
Fixed range rings
Range
North mark
North mark
Slider
bar
RADAR
D
ATA
2
D
ATA 1
74
Tap
Radar Control
Gain
Auto adjustment mode
l
Switch
Switch
Tap
Switch
Manual adjustment mode
Move
Own ship
position to center
(lower left side of
the screen)
77
Tap
TargetTarget
Tap a target to show its range
and bearing from own ship.
How to measure the range, bearing from own ship to a target
How to set a guard zoneHow to set a guard zone
A guard zone alerts you (with aural and visual alarms) when a radar target enters the area you
specify.
The guard zone appears in dashed
lines.
An icon appears at each corner
of the guard zone.
The dashed lines change to
solid lines, indicating the
guard zone is active.
Drag the icons to set guard zone.
20
30
40
60
Open the
[Layers] menu.
1
Tap dashed line on guard zone.
Tap
Guard zoneGuard zone
Tap the guard zone again.
Tap
ON
ON
ON
(Top right corner)
Goto
Goto
Goto
ON
Auto Acquire
8
8
ARPA Operation
ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision. ARPA not only tracks other ships
but also provides their navigation data. Targets can be acquired manually, automatically, or both automatically and manually.
How to show, hide ARPA symbols
How to manually acquire a target
Tap the target to acquire.
Target
Target
Tap
ARPA symbols
Automatic target acquisition
At acquisition Lost target
How to display target data
1
Within 30 seconds
after acquisition
1
ARPA symbols ON
ARPA symbols OFF
Acquire
Set a guard zone, then tap the
guard zone.
Open the [Layers] menu.
20
30
40
60
80
ARP
ON
A
A
A
AR
A
A
A
OFF
Tap an ARPA target to show its data.
4
ARPA symbol
ARPA symbol
Tap
Tap
ON
1
The dashed lines change to solid lines,
indicating the guard zone is active.
4
9
9
OR
CPA/TCPA alarm
CPA Line
The CPA/TCPA alarm releases an aural alarm and a visual alarm (message in Status bar) when both the CPA
and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting.
How to set the CPA/TCPA alarm
How to set the CPA/TCPA alarm
CPA: Closest point of approach
TCPA: Time to closest point of approach
How to acknowledge the CPA/TCPA alarm
How to acknowledge the CPA/TCPA alarm
How to enable the CPA Line feature
How to show the CPA Line
CPA Line
Own ship
ARPA target
Tap the alarm message (top of screen) to acknowledge the alarm and stop the aural alarm.
The CPA Line feature gives you a visual line that depicts the closest point of approach to a selected ARPA target. To
use this feature, own ship position and heading data is required.
CPA/TCPA Alarm
Home screen
H
H
Home screen
H
H
Set the alarm value, then tap [ ].
ON
Tap
Tap
㻻㻺
CPA Graphic Display
5
1010
AIS symbols ON
AIS symbols OFF
How to show or hide AIS target symbolsHow to show or hide AIS target symbols
AIS target symbols
AIS target symbols
Proximity AIS target alarmProximity AIS target alarm
The proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an AIS target is near
the alarm value.
How to show AIS target dataHow to show AIS target data
AIS (Automatic Identification System)
Home screen
H
H
FU
R
U
N
O
98765432
1
Set the alarm value, then tap [ ].
20
30
60
Open the
[Layers] menu.
AI
S
s
ON
OFF
ON
Tap an AIS target to show its data.
AIS symbolAIS symbol FURUNO
Tap
FURUNO
FURUNO
987654321
Color: Blue
SOG and
COG vector
Flashing
Color: Red
Color
- AIS target: Blue
- Cross: Red
Color
- AIS target: Green
- Cross: Red
Class A AIS
Activated
target
Dangerous
target
Lost
target
BFT* AIS
Class B AIS
Color: Green
SOG and
COG vector
SOG and
COG vector
Color: Blue (filled)
Color
- AIS target: Blue (filled)
- Cross: Red
*: Blue Force Tracking
Autres manuels pour TZT12F
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Furuno Moniteur
Furuno
Furuno NAVNET TZTOUCH2 TZTL15F Manuel utilisateur
Furuno
Furuno RD-50 Manuel utilisateur
Furuno
Furuno FMD-1800 Manuel utilisateur
Furuno
Furuno TZT16F Manuel utilisateur
Furuno
Furuno MU-170C Manuel
Furuno
Furuno TZTL12F Manuel utilisateur
Furuno
Furuno SFD-1010 Manuel
Furuno
Furuno NAVNET 3D MFDBB Manuel utilisateur
Furuno
Furuno RD-30 Manuel
Furuno
Furuno FMD3100 Manuel utilisateur
Furuno
Furuno MU-201C Manuel utilisateur
Furuno
Furuno TZTL12F Manuel utilisateur
Furuno
Furuno NAVNET TZTOUCH2 TZTL15F Manuel utilisateur
Furuno
Furuno FEA-2107 Manuel utilisateur
Furuno
Furuno MU-152 Manuel utilisateur
Furuno
Furuno FMD-1712 Manuel utilisateur
Furuno
Furuno FMD-3200 Manuel utilisateur
Furuno
Furuno FEA-2107-BB Manuel utilisateur
Furuno
Furuno Mu 120c Manuel utilisateur
Furuno
Furuno TZTL12F Manuel
