Fujitsu T1323SC010IN Manuel utilisateur

Operating Manual - English

FUJITSU Server PRIMERGY TX1320 M3

Operating Manual

March 2017

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX1320 M3 Operating Manual 3

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

4 Operating Manual TX1320 M3

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for Japan: About SATA hard disk drives (HDDs)

The SATA version of this server supports HDDs with SATA / BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of HDD:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

TX1320 M3 Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups for this manual . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 11

2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 13

2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 23

3 Installation steps, overview . . . . . . . . . . . . . . . . . . 31

4 Important information . . . . . . . . . . . . . . . . . . . . . 33

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 33

4.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 43

4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 44

5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 47

5.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 48

5.2 Setting up the server . . . . . . . . . . . . . . . . . . . . . . 49

5.2.1 Positioning the server vertically . . . . . . . . . . . . . . . . . 50

5.2.2 Positioning the server horizontally . . . . . . . . . . . . . . . . 53

5.3 Connecting devices to the server . . . . . . . . . . . . . . . 54

5.4 Connecting the server to the mains . . . . . . . . . . . . . . 56

5.4.1 Using cable ties (standard PSU) . . . . . . . . . . . . . . . . . 57

5.4.2 Using the cable clamps (hot-plug PSU) . . . . . . . . . . . . . 58

Operating Manual TX1320 M3

Contents

5.5 Notes on connecting/disconnecting cables . . . . . . . . . . 59

6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 61

6.1 Access to the drives . . . . . . . . . . . . . . . . . . . . . . . 61

6.2 Opening the HDD cover . . . . . . . . . . . . . . . . . . . . . 63

6.3 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 64

6.3.1 Server front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

6.3.1.1 Controls on the front panel . . . . . . . . . . . . . . . . . . 64

6.3.1.2 Indicators on the front panel . . . . . . . . . . . . . . . . . . 65

6.3.1.3 Indicators on the drives . . . . . . . . . . . . . . . . . . . . 68

6.3.2 Server rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

6.3.2.1 Indicators on the I/O panel . . . . . . . . . . . . . . . . . . 70

6.3.2.2 Indicator on hot-plug PSUs . . . . . . . . . . . . . . . . . . 74

6.3.2.3 Indicator on Fujitsu battery units (FJBU) . . . . . . . . . . . 75

6.4 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

6.5 Switching the server on and off . . . . . . . . . . . . . . . . 77

6.6 Configuring the server . . . . . . . . . . . . . . . . . . . . . 80

6.6.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 80

6.6.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 81

6.6.3 Configuring the server and installing the operating system

with the ServerView Installation Manager . . . . . . . . . . . . . 82

6.6.4 Configuring the server and installing the operating system

without the ServerView Installation Manager . . . . . . . . . . . 83

6.7 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 84

7 Property and data protection . . . . . . . . . . . . . . . . . . 85

7.1 Mechanical access protection . . . . . . . . . . . . . . . . . 85

7.2 BIOS Setup security functions . . . . . . . . . . . . . . . . . 85

8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 87

8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 87

8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 88

8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 88

TX1320 M3 Operating Manual

Contents

8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 89

8.5 No screen display or display drifts . . . . . . . . . . . . . . 89

8.6 No mouse pointer displayed on screen . . . . . . . . . . . . 89

8.7 Incorrect date and time . . . . . . . . . . . . . . . . . . . . 90

8.8 Drives reported as “dead” when starting system . . . . . . 90

8.9 Added drive reported as defective . . . . . . . . . . . . . . 90

8.10 Error message on screen . . . . . . . . . . . . . . . . . . . 91

Operating Manual TX1320 M3

Contents

TX1320 M3 Operating Manual 9

1 Introduction

The PRIMERGY TX1320 M3 server is an Intel-based server for small and

medium-sized networks and can be used in the horizontal position or as a

desktop model.

The PRIMERGY TX1320 M3 server features exceptionally low energy

consumption, very quiet running and a compact size. As a result, it is also the

ideal solution for small offices.

Thanks to its highly developed hardware and software components, the

PRIMERGY TX1320 M3 server offers a high level of data security and

availability. This includes hot-plug HDD modules (2.5-inch variant), the

ServerView Operations Manager for server management, Prefailure Detection

and Analysing (PDA), and Automatic Server Reconfiguration and Restart

(ASR&R).

Security functions in the BIOS-setup protect the data on the server against

manipulation. Additional security is provided by the lockable drive cover.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your server.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY TX1320 M3 into operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

10 Operating Manual TX1320 M3

Introduction

1.2 Documentation overview

More information on your PRIMERGY TX1320 M3 can be found in the following

documents:

– "Quick Start Hardware - FUJITSU Server PRIMERGY TX1320 M3"

– "ServerView Quick Start Guide"

– "Safety Notes and Regulations" manual

"安全上のご注意 " for Japan

– "Warranty" manual

"保証書 " for Japan

– "ServerView Suite Local Service Concept - LSC" manual

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for Japan

– "FUJITSU Server PRIMERGY TX1320 M3 Upgrade and Maintenance

Manual"

– "D3373 BIOS Setup Utility for FUJITSU Server PRIMERGY TX1320 M3

Reference Manual"

IAll documentation on PRIMERGY hardware and ServerView software is

available online from the Fujitsu manuals server at:

http://manuals.ts.fujitsu.com

For Japan:

http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/

The complete PRIMERGY documentation set can also be downloaded

as a DVD ISO image at:

ftp://ftp.ts.fujitsu.com/images/serverview/manuals

For Japan:

http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/

Further sources of information:

– ServerView Suite Glossary

– Manual for the monitor

– Documentation for the boards and drives

– Operating system documentation

– Information files in your operating system

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu PRIMERGY TX2560 M2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX150 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2450 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 3800E2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX150 S6 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY TX2560 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuel de service

Fujitsu

Fujitsu PRIMERGY TX150 S8 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX2550 M2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY 870 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M5000 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX330 S1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Manuel de la liste des pièces

Fujitsu

Fujitsu PRIMERGY RX2530 M4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 S1 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel de service

Fujitsu

Fujitsu Primergy RX4770 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX200 S5 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2540 M6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX4770 M2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX330 S1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2530 M4 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX200 S4 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur