Fujitsu PRIMERGY RX2540 M6 Manuel utilisateur

FUJITSU Server PRIMERGY RX2540 M6

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

08/2021

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was

created to meet the regulations of a quality management system which complies with the

requirements of the standard DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

RX2540 M6 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual RX2540 M6

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

RX2540 M6 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 12/2020 Initial release

V 2.0 05/2021 – Single rotor fans removed

–Examples SAS EP6xxi RAID controller and

SAS CP2100-8i RAID controller added

–Examples cabling with two FBUs added

– Serial interface updated

– VROC module added

– NVMe user guide deleted

– Example PDUAL CP100 added

– GPU NVDIA V100S changed to GPU NVDIA

A100

– Example GPU NVDIA A10 added

– Cable plan updated

– AIS updated

– Screw list updated

Upgrade and Maintenance Manual RX2540 M6

Issue

number

Issue date Description

V 3.0 07/2021 – CTD option added

– Updating the golden image added

–Shared LAN connector added

– Note on fan test updated

– Example SAS CP2100-8i RAID controller

removed

– Handling microSD cards updated

– Replacing the iRMC microSD card updated

– Replacing the system board updated

– List of documents updated

– M.2 SSD updated

RX2540 M6 Upgrade and Maintenance Manual

Upgrade and Maintenance Manual RX2540 M6

Content

1 Introduction 21

1.1 Concept and target groups of this manual 21

1.2 Notational conventions 21

2 Before you start 23

2.1 Basic information 23

2.1.1 Proceeding 23

2.1.2 Advanced Thermal Design (ATD) 23

2.1.3 Configuration Thermal Design (CTD) 24

2.1.4 Installing optional components 24

2.1.5 Replacing a defective component 25

2.2 Classification of procedures 25

2.2.1 Assignment of unit categories 25

2.2.2 Customer Replaceable Units (CRU) 26

2.2.3 Upgrade and Repair Units (URU) 27

2.2.4 Field Replaceable Units (FRU) 28

2.3 Average task duration 29

2.4 Tools you need at hand 30

2.5 Documentation overview 30

2.5.1 Downloading manuals 30

2.5.2 List of documents 31

3 Important information 35

3.1 Introduction 35

3.2 Safety instructions 35

3.2.1 Basic safety instructions 35

RX2540 M6 Upgrade and Maintenance Manual

3.2.2 Before starting up 36

3.2.3 Installation and operation 36

3.2.4 Batteries 39

3.2.5 Working with optical disk drives (ODDs) and media 39

3.2.6 Laser information 41

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 41

3.2.8 Transporting the server 43

3.2.9 Installing the server in the rack 44

3.2.10 Other important information 44

3.3 CE conformity 45

3.4 FCC Class A Compliance Statement 45

3.5 Environmental protection 46

4 Basic hardware procedures 49

4.1 Using diagnostic information 49

4.1.1 Proceeding 49

4.1.2 Locating the defective server 49

4.1.3 Determining the error class 50

4.1.4 Locating the defective component 50

4.2 Removing the front cover with lock 52

4.3 Shutting down the server 52

4.4 Disconnecting the power cord 53

4.4.1 Disconnecting the power cord (AC PSU) 53

4.4.2 Disconnecting the power cord (DC PSU) 54

4.5 Getting access to the component 56

4.5.1 Safety notes 56

4.5.2 Extending the server out of the rack 56

4.5.3 Removing the server from the rack 57

4.5.4 Removing the top covers 59

4.6 Reassembling 60

4.6.1 Safety notes 60

Content

Upgrade and Maintenance Manual RX2540 M6

Autres manuels pour PRIMERGY RX2540 M6

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu SPARC ENTERPRISE T5220 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M9000 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY Econel 200 S2 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuel de service

Fujitsu

Fujitsu PRIMERGY BX620 S6 Manuel du propriétaire

Fujitsu

Fujitsu SPARC M10-4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX1330 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 S7 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY 300 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX300 S8 Manuel utilisateur

Fujitsu

Fujitsu FUTRO S720 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX300 S7 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX420 S1 Guide de l'utilisateur

Fujitsu

Fujitsu PRIMERGY BX924 S3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX2550 M4 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Guide d'installation

Fujitsu

Fujitsu BS2000 SE Series Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX4770 M5 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX4770 M1 Manuel utilisateur

Fujitsu

Fujitsu FUTRO S900 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX600 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX100 S4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 S7 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur