Fujitsu PRIMERGY Econel 200 S2 Manuel du propriétaire
PRIMERGY Econel 200 S2
Server
Service Supplement
Edition February 2007
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2007 Fujitsu Siemens Computers GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
Econel 200 S2 Service Supplement
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Overview of the documentation . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 17
4.1.2 Removing the processor fan 2 . . . . . . . . . . . . . . . . . . 17
4.1.3 Removing the system fan . . . . . . . . . . . . . . . . . . . . 18
4.1.4 Removing the memory air duct . . . . . . . . . . . . . . . . . 18
4.1.5 Removing the processor fan 1 . . . . . . . . . . . . . . . . . . 18
4.1.6 Removing the front cover . . . . . . . . . . . . . . . . . . . . 19
4.2 Replacing the operating panel cable . . . . . . . . . . . . . 21
4.3 Replacing the USB cable (front side) . . . . . . . . . . . . . 23
4.4 Replacing the temperature sensor . . . . . . . . . . . . . . 25
4.5 Replacing the power supply unit . . . . . . . . . . . . . . . 26
4.6 Replacing the intrusion switch . . . . . . . . . . . . . . . . 29
4.7 Replacing the Chassis ID board . . . . . . . . . . . . . . . . 30
4.8 Replacing the system board . . . . . . . . . . . . . . . . . . 31
Service Supplement Econel 200 S2
Contents
5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.1.1 Chassis ID board . . . . . . . . . . . . . . . . . . . . . . . . . 35
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Econel 200 S2 Service Supplement 5
1 Introduction
The PRIMERGY Econel 200 S2 server is an Intel-based server for workgroups
and small networks. The server is suitable for use as a file server and also as
an application, information or Internet server.
1.1 Overview of the documentation
Concept and target group of this manual
This Service Supplement completes the information given in the Operating
Manual, the Options Guide and the Technical Manual of the system board.
The actions described in this manual should only be performed by service
personnel.
Service DVD
Service partners of Fujitsu Siemens Computers can order a Service DVD
PRIMERGY. On the DVD the following manuals are available in PDF format:
– “Safety notes and other important information” manual
– Operating Manual for PRIMERGY Econel 200 S2
– Technical Manual for the system board D2530
– Options Guide for PRIMERGY Econel 200 S2
– Service Supplement PRIMERGY Econel 200 S2
– BIOS Setup manual
6 Service Supplement Econel 200 S2
Overview of the documentation Introduction
Information/procedure Manual
Detailed safety notes Safety notes and other
important information
Features and technical data of the server
Installation and operation, among other things:
– External ports on the server
– Operation
– Configuration of the server
Troubleshooting
Operating Manual
Information about the system board:
– Features of the system board
– Pin assignment of the connectors
– Jumper settings
– LED indicators
– Replacing the battery
Technical Manual
Extensions and upgrades:
IFor some components only the installation
routine is described in the Options Guide.
Removing these components proceed in
reverse order.
– Installing a second processor
– Extending the main memory
– Installing accessible drives
– Installing SATA hard disk drives
– Installing expansion boards in PCI slots
Cabling
Options Guide
Table 1: Overview of the Documentation Econel 200 S2
Econel 200 S2 Service Supplement 7
Introduction Notational conventions
1.2 Notational conventions
The following notational conventions are used in this manual:
Replacement routines:
– Replacing the operating panel cable
– Replacing the USB cable (front side)
– Replacing the temperature sensor
– Replacing the power supply unit
– Replacing the intrusion switch
– Replacing the Chassis ID board
– Replacing the system board
Board layout
Service Supplement
BIOS setup BIOS Setup
text in italics indicate commands, menu items or software programs.
“quotation marks” indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown
VCAUTION! Pay particular attention to texts marked with this
symbol. Failure to observe this warning may endanger
your life, destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips
Table 2: Notational conventions
Information/procedure Manual
Table 1: Overview of the Documentation Econel 200 S2
Econel 200 S2 Service Supplement 9
2Procedure
VCAUTION!
The actions described in this manual should only be performed by
service personnel.
ÊBefore doing anything else, please take notice of chapter “Safety notes” on
page 11 et seq. .
ÊMake sure all necessary manuals (see service DVD) are available; possibly
print of the PDF files. You will definitely need the Operating Manual for the
server, the Options Guide for the server and the Technical Manual for the
system board.
ÊShut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the chapter “Replacement routines” on
page 17 et seq. .
ÊReplace the defective component as described in the relevant chapter.
ÊClose the server.
ÊConnect the cables.
ÊConnect the server to the line voltage.
ÊStart the operating system.
ÊIf necessary, configure the server as required.
Autres manuels pour PRIMERGY Econel 200 S2
1
Table des matières
Autres manuels Fujitsu Serveur
Fujitsu
Fujitsu SPARC M10-4 Manuel utilisateur
Fujitsu
Fujitsu Primergy BX900 S2 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY RX200 S3 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY TX200 S7 Guide de l'utilisateur
Fujitsu
Fujitsu PRIMERGY 400 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY TX200 S2 Manuel utilisateur
Fujitsu
Fujitsu Primergy RX300 S3 Mode d’emploi
Fujitsu
Fujitsu PRIMERGY TX2550 M5 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY RX300 S5 Manuel du propriétaire
Fujitsu
Fujitsu SPARC M10-1 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY BX600 PG-LNB101 Manuel utilisateur
Fujitsu
Fujitsu SPARC Enterprise M3000 Manuel de service
Fujitsu
Fujitsu PRIMERGY RX200 S6 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY TX140 S2 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY BX900 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY RX600 S4 Manuel utilisateur
Fujitsu
Fujitsu Primergy TX120 Mode d’emploi
Fujitsu
Fujitsu PRIMERGY CX122 S1 Manuel du propriétaire
Fujitsu
Fujitsu PRIMERGY CX270 S1 Manuel utilisateur
Fujitsu
Fujitsu SPARC Enterprise T5440 Server Manuel utilisateur
