Fujitsu PRIMERGY BX620 S5 Manuel utilisateur

PRIMERGY BX620 S5

Server Blade

Operating Manual

Edition July 2009

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]ujitsu.com.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability. The right to technical modification is reserved.

All hardware and software names used are trade names and/or trademarks of their respective

manufacturers.

BX620 S5 Operating Manual

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Concept and target groups for this manual . . . . . . . . . . 6

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 6

1.3 Performance features . . . . . . . . . . . . . . . . . . . . . . 8

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 14

1.5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 15

2 Overview: Installation procedure . . . . . . . . . . . . . . . 17

3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 19

3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 25

3.4 Transporting the Server Blade . . . . . . . . . . . . . . . . 26

3.5 Environmental protection . . . . . . . . . . . . . . . . . . . 27

4 Installing the hardware . . . . . . . . . . . . . . . . . . . . . 29

4.1 Installation procedure . . . . . . . . . . . . . . . . . . . . . 29

4.2 Unpacking the Server Blade . . . . . . . . . . . . . . . . . . 30

4.3 Installing the Server Blade in the basic unit . . . . . . . . . 31

4.4 Connecting the Server Blade . . . . . . . . . . . . . . . . . 36

5 Installation and operation . . . . . . . . . . . . . . . . . . . 39

5.1 Control and connection panel . . . . . . . . . . . . . . . . . 40

5.2 Switching the Server Blade on and off . . . . . . . . . . . . 43

5.3 Configuring a Server Blade . . . . . . . . . . . . . . . . . . 44

5.4 Updating the firmware (BIOS and BMC) . . . . . . . . . . . 46

Operating Manual BX620 S5

Contents

6 BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

6.1 Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

6.2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

6.3 SysInfo menu . . . . . . . . . . . . . . . . . . . . . . . . . . 55

6.4 Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

6.4.1 Boot Features menu . . . . . . . . . . . . . . . . . . . . . . . 58

6.5 Advanced menu . . . . . . . . . . . . . . . . . . . . . . . . . 59

6.5.1 Peripheral Configuration . . . . . . . . . . . . . . . . . . . . . 60

6.5.2 Advanced System Configuration . . . . . . . . . . . . . . . . . 62

6.5.3 Advanced Memory Options . . . . . . . . . . . . . . . . . . . 62

6.5.4 Advanced Processor Options . . . . . . . . . . . . . . . . . . 63

6.6 Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . 65

6.6.1 TPM (Security Chip) Setting . . . . . . . . . . . . . . . . . . . 66

6.7 Power menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

6.8 Server menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

6.8.1 CPU STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

6.8.2 Memory Status . . . . . . . . . . . . . . . . . . . . . . . . . . 70

6.8.3 Console Redirection . . . . . . . . . . . . . . . . . . . . . . . 70

6.8.4 IPMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

6.9 Boot menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

6.10 Exit menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 77

8 CSS components . . . . . . . . . . . . . . . . . . . . . . . . 79

8.1 Replacing hot-plug components . . . . . . . . . . . . . . . . 80

8.1.1 Hot-plug hard disk drives . . . . . . . . . . . . . . . . . . . . . 80

8.2 Replacing non-hot-plug components . . . . . . . . . . . . . 86

8.2.1 Opening server blade and identifying defective CSS component . 86

8.2.2 Replacing memory modules . . . . . . . . . . . . . . . . . . . 91

8.2.3 Closing the server blade . . . . . . . . . . . . . . . . . . . . . 92

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

BX620 S5 Operating Manual 5

1 Preface

The PRIMERGYBX620 S5 dual-socket server blade constitutes the fifth gener-

ation of extremely compact and powerful BX620 server blades. It provides a

range of current technologies such as the latest generation dual-core and quad-

core processors, DDR3 memory modules with powerful 3-channel architecture

per CPU, modular hard disk controller configuration, and 2.5-inch SAS, SATA or

SSD hard disk drives.

Figure 1: PRIMERGY BX620 S5 Server Blade

The modular disk controller concept with three storage module variants allows

you to create different configurations with SAS and SATA hard disks for different

deployment scenarios. The configuration options range from the low-cost

platform with SATA disks to the high-end platform with SAS disks and a SAS

storage module with RAID5 and Cache/iTBBU.

Six onboard Ethernet channels with iSCSI support are available as communi-

cation interfaces and as an option there are two Fibre Channel or two additional

Ethernet channels.

Security functions in the BIOS Setup protect the data on the server blade from

unauthorized changes.

The BX620 S5 server blade occupies one slot in the basic unit PRIMERGY

BX600 S3. It can be installed together with other server blade modules.

6 Operating Manual BX620 S5

Concept and target groups for this manual Preface

1.1 Concept and target groups for this manual

This operating manual shows you how to install the server blade in the basic

unit, how to start up the server blade and how to operate it.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the infor-

mation you need to put your PRIMERGYBX620 S5 into operation.

You will find all information on the installation, startup and operation of server

blades relating to all server blade models in the "PRIMERGY BX600 S3 Basic

Unit" manual.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

1.2 Documentation overview

IPRIMERGY manuals are available in PDF format on the PRIMERGY

ServerView Suite DVD 2. The PRIMERGY ServerView Suite DVD 2 is

part of the PRIMERGY ServerView Suite supplied with every server.

If you no longer have the ServerView Suite DVDs, you can obtain the

relevant current versions using the order number U15000-C289.

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found using the URL:

http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can

be accessed using the Industry standard servers navigation option.

More information on your PRIMERGY BX620 S5 can be found in the following

documents:

– "PRIMERGY BX620 S5 Server Options Guide"

– "PRIMERGY BX620 S5 Server Service Supplement"

– Technical manual for the system board D2686

– "Quick Start Software - Quick Installation Guide" DVD booklet (only included

as a printed copy with the PRIMERGY ServerView Suite)

– “PRIMERGY ServerView Suite Local Service Concept - LSC” manual

BX620 S5 Operating Manual 7

Preface Documentation overview

– “Safety notes and other important information” manual

– “Warranty” manual

– “Returning used devices” manual

– “Helpdesk” leaflet

Further sources of information:

– PRIMERGY Abbreviations and Glossary on the PRIMERGY

ServerView Suite DVD 2

– Manual for the monitor

– Documentation for the boards and drives

– Operating system documentation

– Information files in your operating system

8 Operating Manual BX620 S5

Performance features Preface

1.3 Performance features

Processors

In the BX620 S5 Server Blade, one (basic configuration) or two dual-core or

quad-core processors of the Intel®XEON®type ensure fast data flow and high

system performance.

The addition of processors is described in the Options Guide and the

replacement of processors in the Service Supplement.

VCAUTION!

You are only permitted to combine CPUs with the same clock frequency

and cache capacity in one BX620 S4 Server Blade.

Memory

6 DIMM slots for DDR3 memory modules are available per CPU on the

PRIMERGY BX620 S5 server blade (organized in 2 banks and 3 channels).

These 12 slots for the main memory are suitable both for RDIMM (registered

DIMM) and for UDIMM (unbuffered DIMM) memory modules. You must use

modules of the same size within a memory bank.

The maximum memory configuration when equipped with UDIMM memory

modules is 24 GB (capacities: 1024 and 2048 MB) and 96 GB when equipped

with RDIMM memory modules (capacities: 2048, 4096 and 8192 MB).

IYou are not permitted to mix UDIMM and RDIMM memory modules.

Memory scrubbing and ChipKill™are standard.

The installation of memory modules is described in the Options Guide.

Hard disk drives

The BX620 S4 Server Blade can accommodate up to two 2.5-inch HDD

modules (alternatively with SAS or SATA interface).

SATA HDD modules with a capacity of 120 GB are available. The maximum

hard disk capacity is thus 240 GB (2x120 GB).

SAS HDD modules are available with capacities of 36 GB, 73 GB or 146 GB.

The maximum hard disk capacity is thus 292 GB (2x146 GB).

BX620 S5 Operating Manual 9

Preface Performance features

You can replace or add HDD modules during operation (hot-plug) without

having to remove the server blade cover. The installation/replacement of HDD

modules is described in the chapter “CSS components” on page 79.

Storage modules

The hard disks are controlled by a storage module (controller) that can be

plugged into the system board. The storage module can also have other

functions. Altogether, there are three different variants to choose from: SAS,

SAS/MegaRAID and SAS/PCIe. The PCIe variant allows the installation of low-

profile PCIe boards.

You install/replace storage modules via the front of the server blade without

having to remove the housing cover. However, you cannot do this during

operation (no hot-plug). To do this, you must switch the server blade off instead.

The installation/replacement of storage modules is described in the Options

Guide.

LAN availability

The BX620 S4 Server Blade has three onboard LAN controllers with TOE and

iSCSI functionality, which each provide two 1Gbit/s Ethernet channels. The

connection to the Ethernet LAN is via switch blades or pass-thru blades on the

rear of the basic unit. You will find more details in the operating manual for the

basic unit.

Graphics controller

The BX620 S4 Server Blade has an onboard graphics controller. A monitor can

be connected via the VGA interface (via breakout cable) to the front of the server

blade or via the KVM blade to the rear of the basic unit.

Optional Fibre Channel or Ethernet I/O module (daughter card)

The BX620 S4 Server Blade can be equipped with an I/O daughter card for

connection to a SAN or for additional Ethernet connections.

The following I/O daughter cards are available:

– 4 Gbit/s Fibre Channel I/O module (PCIe), which enables transfer rates of 1,

2 or 4 Gbit/s and supports multiple FC storage subsystems with corre-

sponding versions.

10 Operating Manual BX620 S5

Performance features Preface

IThis I/O module can only be used in a BX600 S3 basic unit and only

with a 4/4 Gbit/s FC switch blade. You will find more information on

this in the operating manual for the BX600 S3 basic unit.

– 1 Gbit Ethernet I/O module (PCIe), which also supports TOE (TCP/IP

Offload Engine) and iSCSI.

– 10 Gbit Ethernet I/O module (PCIe)

IThis I/O module can only be used in a BX600 S3 basic unit and only

with a 10 Gbit switch blade 10/2. You will find more information on this

in the operating manual for the BX600 S3 basic unit.

To allow use of the additional I/O functionality, at least one FC pass-thru blade

(or switch blade) or Ethernet pass-thru blade (or switch blade) must be installed

in the NET3 slot of the basic unit.

IIt is not possible to mix different I/O modules in one basic unit.

The installation of I/O modules at a later time is described in the Options Guide.

Accessible Drives

Accessible drives (e.g. floppy disk or DVD drives) can be connected via the two

USB ports (via breakout cable) on the front of the server blade while the system

is running.

Customer Self Service (CSS)

The Fujitsu Technology Solutions Customer Self Service (CSS) concept

enables you to identify and replace the affected component yourself in the case

of certain error scenarios.

In the CSS concept, you may replace the following components yourself for a

server blade in the event of an error:

– Hot-plug hard disk drives

– Memory modules

The CSS indicator on the control panel of the server blade informs you if a CSS

event arises. For more information on the behavior of this indicator, see the

chapter “Installation and operation” on page 39 and the "PRIMERGY

ServerView Suite Local Service Concept - LSC" manual on the PRIMERGY

ServerView Suite DVD 2.

Autres manuels pour PRIMERGY BX620 S5

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu PRIMERGY T850 Guide de l'utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5140 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY RX1330 M3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 S8 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX600 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX200 S7 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuel de service

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX150 S8 Guide de l'utilisateur

Fujitsu

Fujitsu PRIMERGY RX300 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX400 S1 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY Econel 50 Manuel du propriétaire

Fujitsu

Fujitsu FUTRO S9010 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX100 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX100 S8 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M8000 Guide d'installation

Fujitsu

Fujitsu PRIMERGY TX1330 M3 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS CS800 S5 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 Guide rapide de l'utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX1320 M4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY Econel 200 S2 Manuel du propriétaire

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur