Fujitsu ScanZen EK6 Guide de configuration

CG00002-297901

©ScanZen

Consumable Replacement and Cleaning Instructions

CG00002-297901

©ScanZen

Consumables and Replacement Cycles

To maintain high-quality scanned images, it’s important to clean your scanner regularly and replace the

consumables according to their recommended life cycle.

To receive a consumable and/or cleaning kit, please contact Team Joi at:

Ph: 844-686-8448 M-F, 5am-5pm CT

Email: teamjoi@scanzen.com

Visit: www.scanzen.com

Your scanner records the number of

sheets you scan. This helps you to

know when you should clean and

replace the consumables.

These suggested replacement cycles

apply to standard copy paper (A4 (80

g/m2(20 lb.) wood-free or wood-

containing paper). If you scan heavier

paper, ink heavy documents, coated

paper, etc. you may need to replace

the consumables and clean more

frequently.

For best scanning performance, please

use only the specified consumables

CG00002-297901

©ScanZen

Replacing the Roller Set

The roller set consists of a brake roller and a pick roller. Here’s how to replace the rollers:

1. Remove all documents from the ADF paper chute (feeder).

2. Open the ADF.

3. Remove the brake roller.

a. Press the cover bushing of the brake roller to open the cover in the direction of the

arrow.

b. Pull out the left side of the brake roller shaft, and then pull out the right side of the shaft

from the hole.

4. Remove the brake roller from its shaft.

CAUTION:

Be careful not to have your fingers

caught when the ADF closes.

Brake roller shaft

Brake roller

Brake roller shaft

CG00002-297901

©ScanZen

5. Attach a new brake roller on the shaft. Insert the protrusion on the shaft into the slot.

6. Attach the shaft.

a. Attach the notch, which is on the brake roller shaft, to the slot on the right then attach the

left side of the shaft.

b. Close the cover.

Brake roller

Protrusion

Brake roller shaft

Notch

ATTENTION:

Confirm that the brake roller is installed properly. Otherwise, it may cause feeding errors such as

paper jams.

CG00002-297901

©ScanZen

7. Remove the pick roller.

a. Open the side guide fully to both sides. Then place your finger into the depression and

open the sheet guide in the direction of the arrow.

b. Slide the pick roller and remove it from the top.

Side guide

Depression

Side guide

Sheet guide

CG00002-297901

©ScanZen

8. Attach a new pick roller from the bottom.

a. Check the direction of the notch on the pick roller and of the small roller and insert it in

the hole.

b. Close the sheet guide.

9. Close the ADF.

10. Reset the roller set counter. Start the Software Operation Panel and reset the counter.

CAUTION:

Be careful not to have your fingers caught when the ADF closes.

ATTENTION:

Check that the pick roller is installed properly. Otherwise, it may cause feeding errors such as

paper jams.

Small roller

Notch

CG00002-297901

©ScanZen

Checking and Resetting the Sheet Counters

Checking the sheet counters

You’ll know when you need to change the consumables when the counter background color changes.

The background color will become light yellow at 95,000 sheets, to alert you that the roller set needs

changing soon. At 100,000 sheets, the background color will turn a darker yellow indicated it is time to

replace the consumables.

Start the Software Operation Panel.

Check that the scanner is connected to the computer, then turn on the scanner.

Display the [Software Operation Panel] window.

Windows 7

oSelect the [Start] menu - [All Programs] –[ScanZen] - [Software Operation Panel].

Windows 8.1

oSelect [] on the lower left side of the Start screen - [Software Operation Panel] under

[ScanZen]

Windows 10

oClick [Start] menu - [ScanZen] - [Software Operation Panel].

From the listing on the left,

select [Device Setting].

CG00002-297901

©ScanZen

Resetting the sheet counters

When you have replaced or cleaned a consumable part, reset the corresponding counter by using the

following procedure.

1. Click the [Clear] button for the consumable that you replaced.

2. Click the [OK] button in the Software Operation Panel. A confirmation message appears.

3. Click the [OK] button. The settings are saved.

CG00002-297901

©ScanZen

Cleaning Materials and Locations that Require

Cleaning

Cleaning Materials

Name

Part Number

Notes

F1 Cleaner

PA03950-0352

1 bottle (100 ml)

Moisten a cloth or Cleaning Paper with a

small quantity of this liquid to wipe the

scanner clean.

It may take a long time to dry if an

excessive amount is used. Wipe off the

cleaner completely to leave no residue

on the cleaned parts.

Cleaning Paper

CA99501-0012

1 pack (10 sheets)

Use this non-woven sheet with F1

Cleaner.

Cleaning Wipes

PA03950-0869

1 box (24 packets) Pre-moistened with

F1 Cleaner. It can be used instead of

moistening a cloth with Cleaner.

Cleaning Swab (100/pack)

CG90000-120601

Cleaning Cloth (25/pack)

CG90000-120001

For more information about the cleaning materials, contact us at

Ph: 844-686-8448 M-F, 5am-5pm CT

Email: teamjoi@scanzen.com

Visit: www.scanzen.com

ATTENTION:

In order to use the cleaning materials safely and correctly, read the precautions on each product

thoroughly.

CG00002-297901

©ScanZen

Location and Frequency

Location

Frequency

ADF

Brake roller

Every 3,000 sheets

Pick roller

Plastic idler roller

Glass

Ultrasonic sensor

Feed roller

Eject roller

ATTENTION:

Cleaning cycles may vary depending on the condition of the documents. Also, cleaning must be

performed more frequently when the following types of documents are scanned:

•

Smooth-faced documents such as coated paper

•

Documents with printed text/graphics that almost cover the entire surface

•

Documents containing a large amount of calcium carbonate

•

Documents written in lead pencil

•

Documents on which the toner is not sufficiently fused

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu fi-60F Manuel utilisateur

Fujitsu

Fujitsu ScanSnap S1100 Manuel

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Manuel

Fujitsu

Fujitsu ScanSnap S1300i Manuel utilisateur

Fujitsu

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Manuel de l'installateur

Fujitsu

Fujitsu ScanSnap Organizer Manuel utilisateur

Fujitsu

Fujitsu FI-800R Manuel utilisateur

Fujitsu

Fujitsu ScanPartner 93GX Manuel

Fujitsu

Fujitsu fi-6800 Guide de configuration

Fujitsu

Fujitsu fi-60F Manuel utilisateur

Fujitsu

Fujitsu FI-5015C Manuel utilisateur

Fujitsu

Fujitsu ScanSnap iX500 Manuel

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu FI-5530C2 Manuel

Fujitsu

Fujitsu FI-6140c Guide de configuration

Fujitsu

Fujitsu S500M - ScanSnap - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu 6240 - fi - Document Scanner Manuel

Fujitsu

Fujitsu FI-4010CU Manuel utilisateur

Fujitsu

Fujitsu PA03768-B005 Manuel

Fujitsu

Fujitsu ScanSnap iX500 Instructions de montage

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Manuel

Fujitsu

Fujitsu fi-7160 Manuel

Fujitsu

Fujitsu fi-6800 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap S1300 Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur