Fujitsu Fi-6110 Manuel utilisateur

Getting Started

fi-6110 Image Scanner

Thank you for purchasing fi-6110 Color Image Scanner (hereinafter referred to as "the scanner").

This manual describes the preparation required for use of the scanner. Follow the preparation procedures

described in this manual.

Make sure to read the "Safety Precautions" document provided with the scanner before use.

Read the Operator’s Guide (PDF) included in the Setup DVD-ROM for information about the scanner’s

operation procedures, daily care, consumables replacement, and troubleshooting.

July 2013

Microsoft, Windows, Windows Server, Windows Vista, Excel, and SharePoint are either registered

trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Word is a product of Microsoft Corporation in the United States.

ISIS is a registered trademark or trademark of EMC Corporation in the United States.

ABBYY™ FineReader™ Engine © ABBYY. OCR by ABBYY

ABBYY and FineReader are trademarks of ABBYY.

ScanSnap, ScanSnap Manager, and PaperStream are registered trademarks of PFU LIMITED in Japan.

Other company names and product names are the registered trademarks or trademarks of the respective

companies.

P3PC-3002-04EN

Checking the Components

Make sure that all items shown below are included in the package. If any other packaging is provided, make

sure to store it as well. Make sure to handle the components with care.

The box and packaging materials are required for storage and transportation of the scanner. Do not throw

them away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized

FUJITSU scanner service provider.

Safety Precautions

The provided "Safety Precautions" document

contains important information about the safe use

of the scanner. Before using the scanner, make

sure to read and understand the information

provided in the "Safety Precautions" document.

Symbols Used in This

Manual

The following symbols are used in this manual.

Removing the Protective

Packaging

The scanner comes in a variety of protective

packaging. Follow the procedure described below

to remove the packaging before using the

scanner.

1. Open the stacker, and peel off the tape to

remove the protective foam sheet from the

ADF.

Scanner (× 1) USB Cable (× 1)AC Cable (× 1)

ADF Paper Chute

(× 1)

Setup DVD-ROM (× 1)

AC Adapter (× 1)

Carrier Sheet (× 1)

Safety Precautions (× 1)

Note: The contents may vary depending on the country.

Symbol Description

This symbol alerts operators to an

operation that, if not strictly

observed, may result in severe

injury or death.

This symbol alerts operators to an

operation that, if not strictly

observed, may result in safety

hazards to personnel or damage

to equipment.

WARNING

CAUTION

This symbol alerts particularly

important information. Be sure to

read this information.

This symbol alerts operators to

helpful advice regarding

operation.

Protective

Foam Sheet

and Tape

ADF

Stacker

2. Pull the ADF release tab to open the ADF,

and pull the tape to remove the protective

card.

Installing the Software

The following software are bundled with the

scanner:

zPaperStream IP (TWAIN) Driver

Conforms to the TWAIN standard. Used when

you operate the scanner using TWAIN-

compliant applications.

zPaperStream IP (ISIS) Driver

Conforms to the ISIS standard. Used when you

operate the scanner using ISIS-compliant

applications.

zSoftware Operation Panel

Configure various settings such as the

operation of the scanner and managing the

consumables. Installed together with the

PaperStream IP (TWAIN) driver and

PaperStream IP (ISIS) driver.

zError Recovery Guide

Shows the error status and countermeasures

when an error occurs. Installed together with

the PaperStream IP (TWAIN) driver and

PaperStream IP (ISIS) driver.

zPaperStream Capture

An image scanning application that supports

the PaperStream IP (TWAIN) driver and

PaperStream IP (ISIS) driver. By defining scan

settings as document profiles, you can

customize the settings according to your

preference.

zScanSnap Manager for fi Series

An application that scans images with the driver

settings that are used exclusively for ScanSnap

Manager for fi Series. PaperStream IP (TWAIN)

driver is required to use this application.

Enables easy scanning with a single button.

zScan to Microsoft SharePoint

An application that allows you to upload your

files easily from ScanSnap Manager for fi

Series to a SharePoint site. Can be used to

scan from ScanSnap Manager for fi Series.

zABBYY FineReader for ScanSnap™

Bundled for use with ScanSnap Manager for fi

Series, this application converts scanned

images into Microsoft® Office (Word/Excel®/

PowerPoint®) files. Can be used to scan from

ScanSnap Manager for fi Series.

zManual

Includes Safety Precautions, Getting Started

and Operator's Guide.

zOther Software (Legacy)

Software that were bundled with older versions

of scanners are also included.

zTWAIN Driver

Conforms to the TWAIN standard. Used when you

operate the scanner using TWAIN-compliant

applications.

zISIS Driver

Conforms to the ISIS standard. Used when you

operate the scanner using ISIS-compliant

applications.

zImage Processing Software Option (trial)

A software option featuring advanced binarization

of scanned images.

zScandAll PRO

A TWAIN/ISIS-compliant image scanning

application. You can define scanning settings as

batch profiles to suit your various operation

requirements. By defining scanning settings as

batch profiles, you can easily perform scans in

accordance with various operation requirements.

zScandAll PRO ScanSnap mode Add-in

(hereinafter referred to as "ScanSnap mode")

An add-in application which provides a different set

of driver settings as an alternative to using

ScandAll PRO. TWAIN driver is required to use this

application. Enables easy scanning with a single

button. ScandAll PRO must be installed in order to

install this software.

zScan to Microsoft SharePoint

An application that allows you to upload your files

easily from ScandAll PRO to a SharePoint site.

Can be installed together with ScandAll PRO.

zABBYY FineReader for ScanSnap™

Bundled for use with ScanSnap mode, this

application converts scanned images into

Microsoft®Office (Word/Excel®/PowerPoint®)

files. Can be installed together with ScanSnap

mode.

Bundled Software

ADF Release

Tab

ADF

Protective

Card and

Tape

System requirements are as follows.

*1: ScandAll PRO, ScandAll PRO ScanSnap

mode Add-in, Scan to Microsoft SharePoint,

and ABBYY FineReader for ScanSnap™ are

not supported.

*2: The software operates as a desktop

application.

*3: Disk space corresponding to the resulting

scanned file size is required when scanning

documents.

*4: PaperStream IP, PaperStream Capture and

ScanSnap Manager for fi Series are not

supported.

System Requirements

Operating

system

zWindows®XP Home Edition

(Service Pack 3 or later)

zWindows®XP Professional

(Service Pack 3 or later)

zWindows®XP Professional x64

Edition (Service Pack 2 or later)

zWindows Server®2003, Standard

Edition (*1) (*4)

zWindows Server®2003, Standard

x64 Edition (*1) (*4)

zWindows Server®2003 R2,

Standard Edition

(Service Pack 2 or later) (*4)

zWindows Server®2003 R2,

Standard x64 Edition

(Service Pack 2 or later) (*4)

zWindows Vista®Home Basic (32-

bit/64-bit) (Service Pack 1 or later)

zWindows Vista®Home Premium

(32-bit/64-bit)

(Service Pack 1 or later)

zWindows Vista®Business (32-bit/

64-bit) (Service Pack 1 or later)

zWindows Vista®Enterprise (32-bit/

64-bit) (Service Pack 1 or later)

zWindows Vista®Ultimate (32-bit/

64-bit) (Service Pack 1 or later)

zWindows Server®2008 Standard

(32-bit/64-bit)

zWindows Server®2008 R2,

Standard (64-bit)

zWindows®7 Home Premium (32-

bit/64-bit)

zWindows®7 Professional (32-bit/

64-bit)

zWindows®7 Enterprise (32-bit/64-

bit)

zWindows®7 Ultimate (32-bit/64-bit)

Operating

system

zWindows Server®2012 Standard

(64-bit) (*2)

zWindows®8 (32-bit/64-bit) (*2)

zWindows®8 Pro (32-bit/64-bit) (*2)

zWindows®8 Enterprise (32-bit/64-

bit) (*2)

CPU Intel®Core™ 2 Duo 2.2 GHz or

higher recommended

Memory 1 GB or more recommended

Display

resolution

1024 x 768 or higher, 65536 colors

or more

Hard disk

space

1.3 GB or more of free hard disk

space is required (*3)

DVD drive Essential for installing the software

Interface USB2.0 (High-Speed)

Windows Vista®screen examples are

used to explain the operations. The

screens and operations may differ slightly

depending on the operating system you

are using.

Where there is no distinction between the

different versions of the operating system

shown in the table of system

requirements, the general term Windows®

is used.

Install the bundled software from the Setup DVD-

ROM in the following procedure.

Note that there are two ways to install the bundled

software: select [Installation (Recommended)] to

install all the software required to operate the

scanner, or [Installation (Custom)] to select and

install the software as needed.

■Installation (Recommended)

The following software are installed:

zPaperStream IP (TWAIN) Driver

zSoftware Operation Panel

zError Recovery Guide

zPaperStream Capture

zScanSnap Manager for fi Series

zABBYY FineReader for ScanSnap™

zManual

1. Turn on the computer and log onto

Windows®as a user with Administrator

privileges.

2. Insert the Setup DVD-ROM into the DVD

drive.

DThe [fi Series Setup] screen appears.

3. Click the [Installation (Recommended]

button.

4. Follow the instructions on the screen to

proceed with the installation.

■Installation (Custom)

1. Perform steps 1. to 2. in "Installation

(Recommended)" (page 5).

2. Click the [Installation (Custom)] button.

3. Select the check box for the software to

install and click the [Next] button.

4. Follow the instructions on the screen to

proceed with the installation.

Installing the Bundled Software

If an old version of the software is

installed already, uninstall it first. For

details about the uninstallation

procedures, refer to "A.4 Uninstalling the

Software" in the Operator's Guide.

If the [fi Series Setup] screen does not

appear, double-click "Setup.exe" in

the Setup DVD-ROM via Windows

Explorer or [Computer].

Installing the Scanner

The following describes how to install the scanner.

1. Place the scanner at its installation site.

2. Attach the ADF paper chute.

Insert the tabs on the ADF paper chute into

the slots on the back of the scanner, and

push in to lock it firmly.

Connecting the Cables

The following describes how to connect the cables

between the scanner and your computer.

1. Make sure that the computer is turned off.

2. Connect the USB cable with the USB

connector of the scanner and the USB port

of the computer.

Carry the scanner by supporting it

from the bottom.

143

(5.63)

292

130

380

850

493.5

(14.96)

(33.46)

(19.43) (11.50)

(5.12)

Scanner's Dimensions

Unit: mm (in.)

Installation Space

Tab

ADF Paper Chute

Side Guide

CAUTION

Do not use AC adapters other than the one

supplied with this scanner. Doing so may

cause damage to the scanner.

Manufacturer: Sanken Electric Co., Ltd.

Model number: SED80N2-24.0

zBe sure to use the USB cable which

comes as an accessory with this

scanner.

zWhen connecting to an USB hub,

use the first stage USB hub that is

closest to the computer. If you use

the second or later hub stages, the

scanner may not operate correctly.

zIf you connect the scanner with USB

2.0, it is required that the USB port

and the hub be compliant with USB

2.0. The scanning speed slows down

when you connect the scanner with

USB 1.1.

zConnect the USB cable with the side

showing the USB mark facing up.

USB Connector

AC Cable

USB Cable

Power Connector

AC Adapter

USB mark should

face up

3. Connect the AC cable with the AC adapter

(hereinafter referred to as "the power

cable").

4. Connect the power cable to the power

connector of your scanner and to the AC

outlet.

Test-Scanning Documents

Using ScandAll PRO, you can test-scan

documents to check if they are scanned correctly.

For details about scanning documents by using

PaperStream Capture and the PaperStream IP

driver, refer to the help of each software.

The following describes how to test-scan a

document:

1. Press the [Power] button on the operator

panel of the scanner.

DThe power is turned on, and the [Power]

button lights in green.

During initialization, the Function Number

Display of the operator panel changes as

follows: "8" J"P" J"0" J"1". The

scanner is ready when "1" is displayed.

2. Turn on your computer.

DThe scanner is automatically detected.

3. Load a sheet into the scanner.

1. Pull out the chute extension 1 and chute

extension 2 according to the length of the

sheet.

2. Load the document in the ADF paper chute.

Set the sheet with its front side (scanning

side) facing the ADF paper chute.

WARNING

Be sure to use the supplied power cable.

The following cases may cause electrical

shock or malfunction.

zUsing a power cable other than that

supplied

zUsing the supplied power cable for other

devices

When you plug the AC cable into an

outlet, the [Power] button of the

operator panel on the scanner will

flash once. Note that this is an initial

diagnosis and not a malfunction.

If "1" is not shown in the Function

Number Display, refer to "Chapter 8

Troubleshooting" in the Operator's

Guide.

When you press the [Power] button,

the Check LED will flash once. Note

that this is an initial diagnosis and not

a malfunction.

When the [Found New Hardware]

dialog box appears, select [Locate and

install driver software

(recommended)], and install the driver

by following the on-screen

instructions.

Check

Function

Send to

Scan

/Stop

Power

Function

Number

Display

[Power] Button

Check LED

3. Adjust the side guides to the width of the

sheet.

4. Lift up the stacker and stacker extension

according to the length of the sheet.

4. Launch ScandAll PRO.

Select the [Start] menu J[All Programs] J

[Fujitsu ScandAll PRO] J[ScandAll PRO].

5. Select the [Tool] menu J[Preferences].

DThe [Setup] dialog box appears.

6. On the [Scan] tab, select a driver to use,

and then click the [OK] button.

To use a TWAIN driver, click [TWAIN].

To use an ISIS driver, click [ISIS].

7. Select the [Scan] menu J[Select

Scanner].

DThe [Select Scanner] dialog box appears.

8. Select the scanner you want to use, and

then click the [Select] button.

Select the scanner model which is connected

to your computer.

The list of scanner models varies depending

on the scanner driver installed.

9. Click the [Scan] menu J[Scan Settings].

DThe [Scan Settings] dialog box appears.

10.

Clear the [Save to file] check box.

11.

Click the [Scanner Setting] button.

DThe scanner driver's setup dialog box

appears.

12.

Configure scanner settings such as the

resolution and paper size.

zTWAIN/ISIS drivers

Configure scan settings, and then click the

[OK] button.

13.

In the [Scan Settings] dialog box, click the

[Scan] button.

DThe scanned document images are

displayed in the ScandAll PRO window.

For information about other scanning features,

refer to "Chapter 5 Various Ways to Scan" in the

Operator's Guide.

Contact for Inquiries

Refer to the contact list on the last page of the

"Safety Precautions" document.

TWAIN Driver ISIS Driver

FUJITSU fi-6110dj Fujitsu fi-6110

You only check the operation now, so

you do not have to save to file.

Stacker

Chute

Extension 1

Chute

Extension 2

Stacker

Extension

Side Guides

The scanner driver setup dialog box

may be displayed again after the [OK]

button is clicked. If this occurs, click

the [Scan] button in the dialog box.

When an error occurs in the scanner,

the Function Number Display

alternates between either "J" or "U"

and an "error number" for temporary

errors, and either "E", "H" or "L" and

an "alarm number" for device errors.

If an error occurs, refer to "Chapter 8

Troubleshooting" in the Operator's

Guide.

Autres manuels pour fi-6110

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu SP-1130Ne Manuel

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Guide de configuration

Fujitsu

Fujitsu FI-5530C2 Guide de configuration

Fujitsu

Fujitsu PA03541-B105 Manuel

Fujitsu

Fujitsu fi-6400 Manuel utilisateur

Fujitsu

Fujitsu M3096EX/GX Manuel

Fujitsu

Fujitsu S510 - ScanSnap - Document Scanner Manuel

Fujitsu

Fujitsu ScanSnap iX1600 Guide de configuration

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Manuel

Fujitsu

Fujitsu M3093E Manuel

Fujitsu

Fujitsu fi-6140Z Manuel utilisateur

Fujitsu

Fujitsu PA03768-B005 Manuel

Fujitsu

Fujitsu ScanSnap iX500 Instructions d'installation

Fujitsu

Fujitsu ScanSnap N1800 Guide de démarrage rapide

Fujitsu

Fujitsu SP-1120 Guide de configuration

Fujitsu

Fujitsu fi-4220C2 Manuel utilisateur

Fujitsu

Fujitsu M3096E+ Manuel

Fujitsu

Fujitsu 5015C - fi - Sheetfed Scanner Manuel

Fujitsu

Fujitsu 6000NS - fi - Document Scanner Manuel

Fujitsu

Fujitsu fi-4530C Manuel utilisateur

Fujitsu

Fujitsu fi-6800 Manuel utilisateur

Fujitsu

Fujitsu FI-4120C Manuel utilisateur

Fujitsu

Fujitsu fi-60F Manuel

Fujitsu

Fujitsu SP-1130Ne Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur

Fujitsu fi-6110 Manuel utilisateur

Manuels Scanner populaires d'autres marques