Fujitsu Fi-5650C Guide de configuration

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

fi-5650C & fi-5750C CONSUMABLE

REPLACEMENT AND CLEANING INSTRUCTIONS

CG00000-707601 RevisionC

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

PickRollersQty3

Brake Roller

Qty 3

Cleaning Paper

Qty 1 10/pack

Cotton Swabs

Qty 1 100/pack

F1 Cleaner

IsopropylAlcohol Qty 1

Lint Free

Cleaning Cloths

Qty 2 20/pack

KIT CONTENTS

Note:Quantitymay vary

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

CONSUMABLES LIST

Description Qty Life Fujitsu P/N

Brake Roller 1 250,000 PA03338-K010

Pick Rollers 1 250,000 PA03338-K011

Note:

NCRorCarbonlesspaperhaschemicalcomposition which damages

the Brake Roller and Pick Rollers. Cleaning of these items will be

neededmorefrequentlytoavoidfeedproblemsifscanningalarge

quantity of this type of paper. Also the consumable life will be reduced

if this paper is scanned.

PickRollers

Brake Roller

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

REPLACING THE BRAKE ROLLER

• Whentheconsumableshave

fed250,000pagesthe

message to the right is

displayedonthecomputer

screen.

• Removeanydocuments

remainingintheADFPaper

Chute.

• Press the ADF Buttons to

release the lock and open the

ADF.

• OpentheBrakeRollerCover.

Aworn out or improperlyinstalledBrake Roller will cause multiplefeedsor

paperjams. The Brake Roller has anapproximatelifeof250,000 pages. If

NCR or carbonless paper is scanned the life span of the Brake Roller may

be decreased by as much as 50%.

Note:

It is very strongly recommended to replace the Brake Roller and Pick

Roller at the same time. This will insure the longest possible life for

eachconsumableitem.

IftheBrakeRoller and Pick Roller have been cleaned (refer tothe cleaning

section of this document) they should be replaced if the scanner continues

to multi-feed or jam paper at a high rate.

ADF Buttons

Brake Roller Cover

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

REPLACING THE BRAKE ROLLER (CONT.)

• Lift the Brake Roller out of the

scanner.

• Pull the shaft out of the Brake

Roller.

• Install the shaft into the new

BrakeRoller.

Slots in Brake Roller Collar

Note:

When installing the shaft into the new Brake Roller, make sure to align

the tabs in the roller shaft with the slots on the collar of the Brake

Roller. Referto thephotosbelow.

Tabs in Brake Roller Shaft

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

REPLACING THE BRAKE ROLLER (CONT.)

• Placethe new Brake Roller

intotheBrakeRollerCover,

making sure to align the flat

areaoftheBrake Roller shaft

intheguidegrooveofthe

BrakeRollerCover.

Note:

It is important to make sure that the shaft is at the bottom of the guide

grooveoftheBrake RollerCover.

• Close the Brake Roller Cover, making sure it snaps into place.

• Close theADF.

• Referto“ResettingTheConsumablesCounters” later in this document

toreset the Brake Roller Counter.

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

REPLACING THE PICK ROLLERS

Worn out, defective, or improperly installed Pick Rollers will cause mis-

feedsandpaper jams. The Pick Rollers have an approximatelifeof

250,000pages. If NCR orcarbonlesspaperis scanned, the lifespanof

the Pick Rollers will be decreased by as much as 50%.

Note:

It is very strongly recommended to replace the Brake Roller and Pick

Roller at the same time. This will insure the longest possible life for

eachconsumableitem.

IftheBrakeRoller and Pick Roller have been cleaned (refer tothe cleaning

section of this document) they should be replaced if the scanner continues

to multi-feed or jam paper at a high rate.

• Removeanydocuments

remainingintheADFPaper

Chute.

• Press the ADF Buttons to

release the lock and open the

ADF.

• Slideopen the Sheet Guides

onthePaper Chute, making

sure that they do not obstruct

thePickRollerCover.

• OpenthePickRollerCover.

• Slide the two Pick Rollers in

thedirectionofthe arrow and

lift them out of the scanner.

Note:

ThePickRollers are made

upof two rollers. The roller

with the treads going across

theroller is the Separation

Roller. Theroller withthe

belt in the center is the Pick

Roller.

Separation Roller

Pick Roller

ADF Buttons

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

REPLACING THE PICK ROLLERS (CONT.)

• InstallthenewSeparation

Roller onto the shaft. Make

sure to align the slot in the

roller collar with the screw in

theshaft.

• Install the new Pick Roller

onto the shaft.

Make sure belt is facing up.

• Make sure to align the slot in the roller collar with the screw in the

shaft.

• ClosethePickRollerCover.

• Close theADF.

• Referto“ResettingTheConsumablesCounters” later in this document

to reset the Pick Roller Counter.

Note:

Make sure that the belt is facing up and the wide plastic foot slides

intothegroove in the bottom oftherollercompartment.

Wide Plastic Foot

Groove

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

RESETTING THE CONSUMABLE COUNTERS

After the Brake Roller and the Pick Rollers have been replaced it is

important to reset the scanner consumable counters. These counters will

keep track of how many pages have been scanned since the last time the

consumableswerereplaced. Resetting these counters will insure that

the Brake Roller and the Pick Rollers are replaced before paper feed

problemsoccur.

• Confirm that the scanner and the PC are connected, and the scanner is

poweredon.

• Select [PROGRAMS] - [SCANNER UTILITY FOR MICROSOFT WINDOWS]-

[SOFTWARE OPERATION PANEL]from the [START] Menu.

• The screen to the right is

displayeduponenteringthe

SoftwareOperationPanel.

•Press the DEVICE SETTING tab.

fi-5650C&fi-5750CCONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS

RESETTING THE CONSUMABLE COUNTERS (CONT.)

• TheDeviceSettingScreento

the right is displayed.

• Press the CLEAR button next

to the consumable that has

beenreplaced.

• The screens to the right are

displayedafterpressingthe

correspondingClearbutton.

Press the YES button to

confirmtheresetting of the

Brake Roller or Pick Roller

Counter.

• When the screen to the right

is displayed, press the OK

button.

• Press the OK button when

asked to “Write to EEPROM

OK?” This will reset the

counterandexitthe Software

OperationPanel.

Autres manuels pour fi-5650C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu fi-6110 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap N1800 Manuel utilisateur

Fujitsu

Fujitsu M4099D Guide de configuration

Fujitsu

Fujitsu FI 6140 - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu M3091DC Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

Fujitsu

Fujitsu 6010N - fi - Document Scanner Manuel

Fujitsu

Fujitsu ScanSnap S500 Manuel

Fujitsu

Fujitsu FI-5530C2 Manuel utilisateur

Fujitsu

Fujitsu fi-6000N Guide de configuration

Fujitsu

Fujitsu ScanSnap S1100 Manuel utilisateur

Fujitsu

Fujitsu M3091DC Manuel utilisateur

Fujitsu

Fujitsu S500M - ScanSnap - Document Scanner Manuel

Fujitsu

Fujitsu fi-4640S Manuel utilisateur

Fujitsu

Fujitsu S1500 - ScanSnap Deluxe Bundle Mode d'emploi

Fujitsu

Fujitsu M3099A/G Manuel

Fujitsu

Fujitsu ScanSnap S1100 Manuel

Fujitsu

Fujitsu TWAIN 32 Manuel utilisateur

Fujitsu

Fujitsu PA03360-B505 - ScanSnap S500 Manuel

Fujitsu

Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Manuel

Fujitsu

Fujitsu fi-7160 Manuel utilisateur

Fujitsu

Fujitsu 50FH5037E-02 Manuel d'installation et d'exploitation

Fujitsu

Fujitsu M4099D Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur

Fujitsu fi-5650C Guide de configuration

Manuels Scanner populaires d'autres marques