Fujitsu Fi-5015 Manuel utilisateur

Getting Started

fi-5015C Image Scanner

P3PC-1582-06EN

Thank you for purchasing the fi-5015C Color Scanner.

This document describes how to use fi-5015C and basic operation methods. Before you start using fi-5015C be sure to

thoroughly read this manual to ensure correct use.

The "Operator’s Guide" stored on the Setup DVD Rom provides useful and detailed information on Operations when

you would like to use advanced features, Daily Care for maintenance of the scanner, and Replacing Consumables to

maintain conditions for smooth scanning. Please also read the Operator’s Guide for further information.

Microsoft, Windows, Windows Server, Windows Vista, and SharePoint are either registered trademarks or trademarks

of Microsoft Corporation in the United States and/or other countries.

ISIS is a registered trademark or trademark of EMC Corporation in the United States.

Other company names and product names are the registered trademarks or trademarks of the respective companies.

March, 2013

How Trademarks Are Indicated In

This Manual

References to operating systems (OS) are

indicated as follows:

Where there is no distinction between the different

versions of the above operating system, the

general term "Windows" is used.

Windows 2000 Windows®2000 Professional

operating system

Windows XP Windows®XP Home Edition

operating system,

Windows®XP Professional

operating system (32/64-bit)

Windows

Server 2003

Windows Server®2003,

Standard Edition (32/64-bit),

Windows Server®2003 R2,

Standard Edition (32/64-bit)

Windows Vista Windows Vista®Home Basic

operating system (32/64-bit),

Windows Vista®Home Premium

operating system (32/64-bit),

Windows Vista®Business

operating system (32/64-bit),

Windows Vista®Enterprise

operating system (32/64-bit),

Windows Vista®Ultimate

operating system (32/64-bit)

Windows

Server 2008

Windows Server®2008

Standard (32/64-bit),

Windows Server®2008 R2

Standard

Windows 7 Windows®7 Home Premium

operating system (32/64-bit),

Windows®7 Professional

operating system (32/64-bit),

Windows®7 Enterprise

operating system (32/64-bit),

Windows®7 Ultimate operating

system (32/64-bit)

Windows

Server 2012

Windows Server®2012

Standard (64-bit)

Windows 8 Windows®8 operating system

(32/64-bit),

Windows®8 Pro operating

system (32/64-bit),

Windows®8 Enterprise

operating system (32/64-bit)

About Maintenance

The user must not perform repairs on this scanner.

Contact the store where you purchased the scanner

or an authorized FUJITSU Image Scanner service

provider to make repairs to this product.

Safety Precautions

The attached "Safety Precautions" manual

describes important details for users to use this

product safely and correctly. Read the Safety

Precautions thoroughly before you start using this

product.

Warning Indications Used In This

Manual

Symbols Used In This Manual

Warning Label

Screen Examples In This Manual

The screen examples in this manual are subject to

change without notice in the interest of product

improvement. If the actual displayed screen

differs from the screen examples in this manual,

operate by following the actual displayed screen

while referring to the User's Manual of the

scanner application you are using.

The screen examples used in this manual are of

the TWAIN driver, ISIS driver, and ScandAll PRO

(image scanning application).

WARNING

This indication alerts operators to an

operation that, if not strictly

observed, may result in severe injury

or death.

CAUTION

This indication alerts operators to an

operation that, if not strictly

observed, may result in safety

hazards to personnel or damage to

equipment.

ATTENTION

This symbol alerts operators to particularly

important information. Be sure to read this

information.

HINT

This symbol alerts operators to helpful

advice regarding operation.

The glass surface inside the ADF becomes hot

during the operation. Be careful not to touch the

glass surface inside the ADF.

ATTENTION

Do NOT remove, stain or scratch the

warning labels from the scanner.

Chapter1 PREPARING THE SCANNER

1.1 Checking the Contents of the Scanner Package

Make sure that all items shown below are included in the package.

If any parts are missing or defective, contact your scanner dealer or an authorized FUJITSU scanner service provider.

Handle the scanner and accessories with care.

Scanner (x1)

ADF paper chute (x1)

Extension (x1)

Document stopper

(x1)

AC cable

(The contents may vary depending on the country and the

model purchased.)

AC adapter (x1)

USB cable (x1)

SETUP DVD-ROM (x1)

Safety Precautions (x1)

PAD-ASSY (x1)

Chapter2

INSTALLATION OF THE SCANNER

2.1 Installing the Scanner Application

For scanning documents with this scanner, both scanner driver and image capturing application software (called "appli-

cation" hereafter) must be installed on your PC.

The following scanner drivers and applications are provided:

•Scanner Driver:

TWAIN Scanner Driver

ISIS Scanner Driver

•Scanning application:

ScandAll PRO (For TWAIN driver/ISIS driver)

Install the appropriate scanner driver for the application you will use. The following sections describe installation of

each driver and application.

ATTENTION

Please install the scanner driver before connecting the scanner to your PC.

If you connect the scanner before installing the scanner driver, the scanner will not operate correctly.

If you have connected the scanner beforehand, the "Found New Hardware Wizard" screen appears (this screen

might differ slightly according to the used OS) . On this screen, click the [Cancel] button to close the Wizard

screen and install the scanner driver first.

For TWAIN Scanner Driver

■Preparation

Confirm the following items before installing the appli-

cation.

•Take out the Setup DVD-ROM from its

package, but do not insert the Setup DVD-

ROM into the DVD driver yet.

•Uninstall any older version of TWAIN driver

if already installed.

■Installing the TWAIN Scanner

Driver

1. Turn on your PC and log on to Windows.

2. Insert the Setup DVD-ROM into the DVD drive.

⇒<SETUP DICS START UP SCREEN> appears.

3. Click [INSTALL], and then click [TWAIN

Driver].

4. Error Recovery Guide Installation window

appears.

Error Recovery Guide is a software that dis-

plays troubleshooting information on screen

when any scanner error occurs. Although this

software’s installation is highly recommended,

it can be installed later if you do not install it in

this step.

5. Select a language used for installation on

[Choose Setup Language] window and click

[Next].

6. Follow the instructions on the window to install

the application.

7. When the [InstallShield Wizard Complete] win-

dow appears, click [Finish].

Your computer will be restarted.

Do not remove the Setup DVD-ROM from the DVD

drive until your PC has completely restarted.

Installation of the scanner driver is completed.

ATTENTION

Uninstall [Scanner Utility for Microsoft Win-

dows] from [Add/Remove Programs] of the

control panel.

ATTENTION

Windows XP screenshots are used in this

section as examples. The windows and

operations may slightly vary depending on

your OS.

ATTENTION

Be sure to log on as a user with "Adminis-

trator" privileges.

ATTENTION

This screen may not appear when the

"Autoplay" setting of your PC is OFF. In

this case, run "AutoPlayer.exe" in this

DVD-ROM directly from the "Explorer" or

"My Computer".

ATTENTION

When you select [Yes] for installing the

Error Recovery Guide, [Choose Setup

Language] window appears. Select a lan-

guage and follow the instructions on the

window. Error Recovery Guide will auto-

matically continue finishing its installation.

Please wait until the installation of TWAIN

driver automatically starts.

■Installing ScandAll PRO/Scan to

Microsoft SharePoint

ScandAll PRO is software for scanning images, which is

in compliance with both TWAN/ISIS standards. Using

TWAIN or ISIS together with ScandAll PRO allows you

to create document images.

Scan to Microsoft SharePoint is an application that

allows you to upload your files easily from ScandAll

PRO to a SharePoint site. Can be installed together with

ScandAll PRO.

1. Insert the Setup DVD-ROM into the DVD drive.

⇒<SETUP DICS START UP SCREEN> appears.

2. Click [INSTALL], and then click [ScandAll

PRO].

3. Select a language for the installation on

[Choose Setup Language] dialog box, and then

click the [Next] button.

4. Proceed with the installation, following the on-

screen instructions.

5. When the [InstallShield Wizard Complete] dia-

log box appears, click the [Finish] button.

For ISIS Scanner Driver

■Preparation

Take out the Setup DVD-ROM from its package, but do

not insert the Setup DVD-ROM into the DVD drive yet.

■Installing the ISIS Scanner Driver

1. Press the power button to turn on the scanner.

2. Turn on your personal computer, and then log

on to Windows.

3. When the scanner is automatically detected,

[Found New Hardware Wizard] or [Add/

Remove Hardware Wizard] dialog box will

appear. Click the [Cancel] button to close the

Wizard dialog box.

4. Insert the "Setup DVD-ROM" into the DVD

drive.

⇒<SETUP DICS START UP SCREEN> appears.

ATTENTION

Depending on the operating system you are

using, you may need to do the following.

Windows 2000:

If you see the [Digital Signature not

Found] dialog box, click the [Yes] button.

Windows Vista:

If you see the [Found New Hardware] dia-

log box, select [Locate and install driver

software], and then in the [User Account

Control] dialog box, click the [Continue]

button, if it is displayed.

ATTENTION

Be sure to log on as a user with "Adminis-

trator" privileges.

HINT

For information about the features of Scan-

dAll PRO, refer to Help topics in ScandAll

PRO.

ATTENTION

Windows XP screenshots are used in this

section as examples. The windows and

operations may vary slightly depending on

your OS.

ATTENTION

Be sure to log on as a user with "Adminis-

trator" privileges.

ATTENTION

The [SETUP DICS START UP SCREEN]

may not appear if the "AutoPlay" setting is

set to off. In this case, find

"AutoPlayer.exe" in the DVD-ROM using

"Explore" or "My Computer" and execute

it.

5. Click [INSTALL], and then click [ISIS Driver].

6. Error Recovery Guide Installation dialog box

appears.

Error Recovery Guide is an application with

which you can view on-screen information for

troubleshooting errors that may occur in the

scanner. This guide helps solve problems, so

select [Yes] to install it. You may also choose

to install it later.

7. Select a language for the installation on the

[Choose Setup Language] dialog box, and then

click the [Next] button.

8. Install the driver, following the on-screen

instructions.

9. When you see the [InstallShield Wizard Com-

plete] dialog box, click the [Finish] button.

Your computer will restart and detect the scanner. Do

not remove the Setup DVD-ROM from the DVD drive

until your personal computer completely starts up again.

Software Operation Panel

You can configure settings related to scanning and man-

age consumables using the Software Operation Panel. It

is installed together with TWAIN driver/ISIS driver.

Error Recovery Guide

Error Recovery Guide is a software that displays trou-

bleshooting information on screen if any scanner error

occurs.

If you did not install together the Error Recovery Guide

with the driver, please proceed with the procedures

given below for installing it.

1. Insert the Setup DVD-ROM into the DVD drive.

⇒<SETUP DICS STARTUP SCREEN> appears.

2. Click [INSTALL].

3. Click [Error Recovery Guide] on the next

screen.

4. Select a language to use for the installation in

the <Choose Setup Language> window and

click [OK].

5. Install the application following the instructions

in the window.

6. When the [InstallShield Wizard Complete]

screen displays, click [Finish].

ATTENTION

After you select [Yes] for installing Error

Recovery Guide, the [Choose Setup Lan-

guage] dialog box appears. Select a lan-

guage and follow the on-screen

instructions. The Error Recovery Guide

dialog box is automatically displayed when

the installation is complete. Wait until the

installation of the ISIS starts.

ATTENTION

Depending on the operating system you

are using, you may need to do the follow-

ing.

Windows 2000:

If you see the [Digital Signature not

Found] dialog box, click [Yes].

Windows Vista:

If you see the [Found New Hardware] dia-

log box, select [Locate and install driver

software], and then in the [User Account

Control] dialog box, click the [Continue]

button, if it is displayed.

(Trial)

Image Processing Software Option

For details on the installation of the Image Processing

Software Option, refer to the "Image Processing Soft-

ware Option USER’S GUIDE".

■

Uninstalling Supplied Programs

Follow the procedure below to uninstall supplied pro-

grams.

1. Start up your PC.

2. Exit all currently running programs.

3. Select [Control Panel] - [Add or remove Pro-

grams] from the [Start] menu.

⇒This displays the "Add or remove Programs"

screen which displays a list of the currently

installed applications.

4. Select the application to uninstall.

•When uninstalling TWAIN scanner driver,

select "Scanner Utility for Microsoft Win-

dows".

•When uninstalling ScandAll PRO,

select "Fujitsu ScandAll PRO". After ScandAll

PRO, you can also remove Scan to Microsoft

SharePoint.

•Microsoft SharePoint: [Scan to Microsoft

SharePoint]

•When uninstalling ISIS scanner driver,

select "ISIS Driver Bundle Installer for fi

Series Scanners".

•When uninstalling Error Recovery Guide,

select "Error Recovery Guide".

•When uninstalling Image Processing Soft-

ware Option,

select "Image Processing Software Option"

•When uninstalling Software Operation

Panel,

select "Software Operation Panel".

5. Click the [Change/Remove] or [Remove] but-

ton.

6. When the confirmation dialog box appears,

Click the [OK] or [Yes] button.

⇒This executes the uninstallation.

HINT

Windows XP screenshots are used in this

section. The windows and operations may

slightly vary depending on your OS.

ATTENTION

Be sure to log on as a user with "Adminis-

trator" privileges.

ATTENTION

Screen displays may vary slightly accord-

ing to the operation system (OS) you are

using. Follow the on screen instructions of

the OS.

Examples

In Windows 2000, the window and button

names described above are as follows:

•[Add or Remove Programs] -> [Add/

Remove Applications]

•The [Change/Remove] button -> The

[Add/Remove] button

In Windows Vista, the window and button

names described above are as follows:

•[Uninstall or Change a program] ->[Unin-

stall or Change]

2.2 Installing the Scanner

After the computer has been restarted, connect the scan-

ner.

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to "fi-5015C

Operator’s Guide" "Appendix A Installation

Specifications" in the Setup DVD-ROM.

2. Unlock the shipping lock

The carrier unit inside the scanner is fixed in

place by the shipping lock to prevent the scanner

from becoming damaged during transportation

from factory.

After transporting and placing the scanner, release

the shipping lock.

3. Installation of the ADF paper chute, Extension

and Document stopper.

Attach Extension to ADF paper chute, and then

mount it on the scanner; attach Document stopper

to the scanner.

4. Connect the ADF cable to the ADF cable con-

nector on the scanner, and secure it with

screws.

5. Connect the AC adapter.

1) Connect the AC cable to the AC adapter.

2) Connect the AC adapter connector to the

scanner’s DC inlet.

3) Plug the AC cable into the outlet.

ADF paper chute

Extension Document stopper

ATTENTION

Use only the AC adapter provided by the

manufacturer.

HINT

The Function Number Display and the LED

may flash for an instant when plugging the

AC cable into the outlet.

Screw

2.3 Connecting the Scanner to

Your PC

Follow the procedure below to connect the USB cable.

1. Connect the USB interface cable to the USB

interface connector.

2. Connect the other end of the USB interface

cable to the PC.

3. Press the "I" side of the main power switch to

turn on the scanner.

4. Press the power button to turn ON the scanner.

Your scanner will be automatically detected.

For Windows 2000:

When [Digital Signature not Found] appears,

click [Yes].

The installation of the scanner is completed.

2.4 Confirming Installation

This section explains how to check the operation of the

installed scanner driver by using ScandAll PRO.

Make sure that the scanner driver is installed properly,

following the procedure below.

■Checking the Operation of the

Scanner Driver

1. Load the document on the scanner.

2. Launch ScandAll PRO.

From the [start] menu, select [All Programs] ->

[Fujitsu ScandAll PRO] -> [ScandAll PRO].

⇒ScandAll PRO starts up.

3. In ScandAll PRO, select [Tool] on the menu,

and then select [Preferences].

⇒The [Setup] dialog box appears.

4. On the [Scan] tab, select a driver.

To check the operation of TWAIN, select

[TWAIN].

To check the operation of ISIS, select [ISIS].

5. Click the [OK] button to close the [Setup] dialog

box.

6. In ScandAll PRO, select [Scan] on the menu,

and then select [Select Scanner].

7. Select a scanner in the displayed dialog box.

To use TWAIN:

Select [FUJITSU fi-5015C], and then click the

[Select] button.

To use ISIS:

Select [Fujitsu fi-5015C] and then click the

[Select] button.

8. Select [Scan] on the menu, and then select

[Scan Settings].

ATTENTION

•Be sure to use the USB cable which

comes as an accessory with this scan-

ner. Correct operation with commercially

available cables is not guaranteed.

•When connecting to an USB hub, use

the first stage USB hub that is closest to

the computer. If you use the second or

later hub stages, the scanner may not

operate correctly.

•If you connect the scanner with USB 2.0,

it is required that the USB port and Hub

are compliant with USB 2.0. The scan-

ning speed may slow down if it is con-

nected with USB1.1.

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu fi-6130Z Manuel utilisateur

Fujitsu

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Manuel

Fujitsu

Fujitsu fi 5750C - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Manuel

Fujitsu

Fujitsu ScanSnap iX500 Manuel

Fujitsu

Fujitsu M3093GX Manuel d'utilisation et d'entretien

Fujitsu

Fujitsu FI-5900C Manuel utilisateur

Fujitsu

Fujitsu S300M - ScanSnap - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu M3096EX Guide de configuration

Fujitsu

Fujitsu fi-7160 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap fi-5110EOXM Manuel utilisateur

Fujitsu

Fujitsu fi-6110 Manuel utilisateur

Fujitsu

Fujitsu M4099D Manuel utilisateur

Fujitsu

Fujitsu PA03360-B615 Manuel

Fujitsu

Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu fi-4340C Guide de configuration

Fujitsu

Fujitsu fi-4220C2 Manuel

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Guide de configuration

Fujitsu

Fujitsu ScanSnap S1100i Manuel utilisateur

Fujitsu

Fujitsu ScanSnap S300 Manuel utilisateur

Fujitsu

Fujitsu FI-5015C Manuel utilisateur

Fujitsu

Fujitsu ScanSnap N1800 Manuel

Fujitsu

Fujitsu fi-4220C2 Guide de configuration

Fujitsu

Fujitsu fi-6140Z Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur

Fujitsu fi-5015 Manuel utilisateur

Manuels Scanner populaires d'autres marques