FS MANAGED L2 Manuel utilisateur

V2.0

COMMUTATEUR DE ROUTAGE L2/L3 GÉRÉ

MANAGED L2/L3-ROUTING-SWITCHES

MANAGED L2/L3 ROUTING SWITCHES

Quick Start Guide

Quick-Start Anleitung

Guide de Démarrage Rapide

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

10/100/1000BASE-T

S5800-48T4S

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 910 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

S5800-48F4SR

Introduction

Thank you for choosing S5800 Series switches. This guide is designed to familiarize you with the

layout of the switches and describe how to deploy the switches in your network.

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

10/100/1000BASE-T

S5800-48T4S

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

S5800-48F4SR

S5800-48T4S

S5800-48F4SR

Power Cord x2

Grounding Cable x1 Rubber Pad x4 M4 Screw x10

Mounting Bracket x2

Console Cable x1 Network Cable x1

Accessories

Hardware Overview

Front Panel Ports

S5800-48F4SR

S5800-48T4S

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

S5800-48F4SR

SFP SFP+CON

USBETH

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

10/100/1000 BASE-T

S5800-48T4S

RJ45 SFP+CON

USBETH

Ports Description

RJ45

SFP

SFP+

CON

10/100/1000BASE-T ports for Ethernet connection

Hot-swappable SFP ports for 1G connection

Hot-swappable SFP+ ports for 1/10G connection

An RJ45 console port for serial management

ETH

USB

An RJ-45 Ethernet management port

A USB management port for software and conﬁguration backup

and oﬄine software upgrade

Front Panel LEDs

S5800-48F4SR

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

S5800-48F4SR

SFP SFP+

S5800-48T4S

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

10/100/1000 BASE-T

S5800-48T4S

RJ45 SFP+

SYS

ID indication function enable.Blue

Green

Oﬀ

Amber

ID indication function disable.

The system is normally running.

The system occurs alarm or error.

No power or no system runs or system runs abnormally.

SFP+

ETH

RJ45/SFP

Green

Blinking Green

Green

Blinking Green

Oﬀ

Amber

Blinking Amber

Green

Amber

Port is linked.

Port is receiving or transmitting packets.

Port is not linked.

1G port is linked.

1G packets are receiving or transmitting.

10/100M port is linked.

10/100M packets are receiving or transmitting.

Port is not linked.

10G port is linked.

10G packets are receiving or transmitting.

1G port is linked.

1G packets are receiving or transmitting.

Port is not linked.

LEDs Status Description

ID SYS

ETH

ID SYS

Back Panel

Site Environment:

Installation Requirements

Grounding Point

3 Fixed Fans 2 Hot-swappable Power Supplies

Do not operate it in an area that exceeds an ambient temperature of 45ºC.

The installation site must be well ventilated. Ensure that there is adequate air ﬂow around the

switch.

Be sure that the switch is level and stable to avoid any hazardous conditions.

Do not install the equipment in a dusty environment.

The installation site must be free from leaking or dripping water, heavy dew, and humidity.

Ensure rack and working platforms are well earthed.

Before you begin the installation, make sure that you have the following:

Phillips screwdriver.

Standard-sized, 19" wide rack with a minimum of 1U height available.

Category 5e or higher RJ45 Ethernet cables for connecting the network devices.

S5800-48F4SR/S5800-48T4S

Mounting the Switch

Desk Mounting

Rack Mounting

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

S5800-48F4SR

1. Attach four rubber pads to the bottom.

2. Place the chassis on a desk.

1. Secure the mounting brackets to the two sides of the switch with eight M4 screws.

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the

switch is mounted.

2. Secure the grounding lug to the grounding point on the switch back panel with the washer and

screws.

2. Attach the switch to the rack using four M6 screws and cage nuts.

38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

Grounding the Switch

CAUTION: The earth connection must not be removed unless all supply connections have

been disconnected.

CAUTION: Laser beams will cause eye damage. Do not look into bores of optical modules

or optical ﬁbers without eye protection.

1. Plug the AC power cord into the power port on the back of the switch.

2. Connect the other end of the power cord to an AC power source.

1. Plug a compatible SFP/SFP+ transceiver into the SFP/SFP+ port.

2. Connect a ﬁber optic cable to the ﬁber transceiver. Then connect the other end of the cable to

another ﬁber device.

Connecting the Power

Connecting the SFP/SFP+ Ports

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

10G

Connecting the Management Ports

1. Insert the RJ45 connector of the console cable into the RJ45 console port on the front of the switch.

2. Connect the other end of the console cable to the RS-232 serial port on the computer.

1. Connect one end of a standard RJ45 Ethernet cable to a computer.

2. Connect the other end of the cable to the ETH port on the front of the switch.

Connecting the Console Port

Connecting the ETH Port

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10

S5800-48F4SR

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22

S5800-48F4SR

Conﬁguring the Switch

Insert the Universal Serial Bus (USB) ﬂash disk to the USB port for software and conﬁguration backup

and oﬄine software upgrade.

Step1: Connect the computer to the Management port of the switch using the network cable.

Step 2: Set the IP address of the computer to 192.168.1.x. ("x" is any number from 2 to 254.). Set the

subnet mask of the computer to 255.255.255.0.

Connecting the USB Port

Conﬁguring the Switch Using the Web-based Interface

CON

ETH

ID SYS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24

S5800-48F4SR

USB

OK Cancel

General

IP address:

Subnet mask:

Default gateway:

You can get IP settings assigned automatically if your network

supports this capability. Otherwise, you need to ask your network

administrator for the appropriate IP settings.

Internet Protocol Version 4(TCP/IPv4) Properties

Use the following IP address:

Obtain an IP address automatically

Preferred DNS server:

Alternate DNS server:

Validate settings upon exit Advanced...

. . . 21168192

0255

255255

. . .

Obtain DNS server address automatically

Use the following DNS server addresses:

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels FS Changer

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur