FS IES3110 Series Manuel utilisateur
Industrieller PoE+-Switch
Switch POE+ Industriel
Quick Start Guide V1.0
Quick Start Anleitung
Guide de Démarrage Rapide
Industrial POE+ Switch
IES3110-8TFP-R PoE+
1 2
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
CONCOLE
Reset
115200,8,N,1
IES3110 Series
IES3110-8TF-R
1 2
3 4
5 6
7 8
10/100/1000M
PWR
1000M Link/Act
100M Link/Act
SYS
9 10
IES3110-8TFP-R PoE+
1 2
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
1
EN
Introduction
IES3110-8TFP-R
IES3110-8TF-R
Thank you for choosing IES3110 Series industrial PoE+ Switch. This guide is designed to familiarize
you with the layout of the switch and describes how to deploy the switch in your network.
2
EN
IES3110-8TF-R
12
3 4
5 6
7 8
10/100/1000M
PWR
1000M Link/Act
100M Link/Act
SYS
9 10
IES3110-8TFP-R PoE+
12
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
IES3110-8TFP-R
IES3110-8TF-R
Front Panel Ports
Hardware Overview
SFP
CONSOLE
Accessory
Console Cable x1
IES3110-8TF-R/IES3110-8TFP-R
SFP
CONSOLE
3
EN
Front Panel LEDs
Ports Description
SFP ports for 100M/1G/2.5G connection.
A RJ45 console port for serial management.
SFP
CONSOLE
IES3110-8TF-R
12
3 4
5 6
7 8
10/100/1000M
PWR
1000M Link/Act
100M Link/Act
SYS
9 10
IES3110-8TFP-R PoE+
12
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
IES3110-8TFP-R
IES3110-8TF-R
SFP
PWR
SYS
Link/Act
SFP
PWR
SYS
PoE/Act
Link/Act
CONSOLE
1152008,N,1
Reset
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
System is not running.Off
Powered.
No Power.
Indicator DescriptionState
PWR
On
Off
System is operating normally.
SYS
On
On
Slow Blinking
Off
POE/Act
Link/Act
SFP
On
Off
Blinking
1000M Link.
10/100M Link.
10/100/1000 Link normally.
Link disconnect.
Link data transmission.
Fiber connection is normal.
Off Disconnect.
Blinking Link data transmission.
4
EN
Rear Panel
Upper Panel
Grounding Point
Terminal Block Connector CONSOLE
DIN-rail Mounting Kit
5
EN
Installation Requirements
Before you begin the installation, make sure that you have the
followings:
Metropolitan area fiber broadband network: telecommunications, cable TV, network system
integration, etc., network operators.
Broadband private network: Suitable for financial, government, oil, railway, electric power,
public security, transportation, education and other industries.
Multimedia transmission: image, voice, data integrated transmission, suitable for remote
teaching, conference TV, videophone and other applications.
Real-time monitoring: simultaneous transmission of real-time control signals, images, data.
Resistant to harsh environment: Suitable for strong electromagnetic interference, networking
in harsh environments at long distances.
1. Hook the mount bracket over the top of the rail.
2. Rotate the switch downward towards the rail to lock it into place until the click is heard.
3. Pull down to clear the bottom of the DIN-Rail and rotate away from the rail.
Mounting the Switch
DIN-Rail Mounting
Mounting the unit Releasing the unit
CONSOLE
1152008,N,1
Reset
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
CONSOLE
1152008,N,1
Reset
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
6
EN
1. Connect one end of the power cable to the switch.
2. Connect the other end of the power cable to the power supply.
Connecting the Power
1. Connect one end of the grounding cable to the switch.
2. Connect the other end of the grounding cable to the earth ground.
Grounding the Switch
CONSOLE
1152008,N,1
Reset
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
CONSOLE
1152008,N,1
Reset
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
IES3110-8TFP-R PoE+
12
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
CONCOLE
Reset
115200,8,N,1
7
EN
1. Connect an Ethernet cable to the RJ45 port of a camera, outdoor AP, computer or other network
device.
2. Connect the other end of the Ethernet cable to the RJ45port of the switch.
Connecting the RJ45 Ports
1. Plug the compatible SFP transceiver into the SFP port.
2. Connect a fiber optic cable to the fiber transceiver. Then connect the other end of the cable to
another fiber device.
Connecting the SFP Ports
IES3110-8TFP-R PoE+
12
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
CONCOLE
Reset
115200,8,N,1
8
EN
Step1: Connect the computer to any RJ45 port of the switch using the network cable.
Step2: Set the IP address of the computer to 192.168.1.X (“x” is any number from 1 to 254)
Step3: Open a web browser, enter the default IP address of the switch 192.168.1.1,
and enter the default username and password, admin/admin.
Step4: Click Login to display the web-based configuration page.
Step1: Connect a computer to the switch’s console port using the console cable.
Step2: Start the terminal simulation software such as HyperTerminal on the computer.
Step3: Set the parameters of the HyperTerminal:9600 bits per second, 8 data bits, no parity,
1 stop bit, no flow control.
Step4: After setting the parameters, click Connect to enter.
Configuring the Switch
Configuring the Switch Using the Web-based Interface
Configuring the Switch Using the Console Port
100M/1G/2.5G Port is not working
1. Ensure the optical module and cable have no problem.
2. Check if the configuration at both ends of the communication device is auto or forced rate.
Troubleshooting
CONSOLE
1152008,N,1
Reset
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
IES3110-8TFP-R PoE+
12
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
1. Insert the RJ45 console port on the front of the switch.
2. Connect the DB9 female connector of the console cable to the serial port on the computer.
Connecting the Console Port
9
EN
FS ensures our customers that any damage or faculty items due to our workmanship, we will offer
a free return within 30 days from the day you receive your goods. This excludes any custom-made
items or tailored solutions.
Product Warranty
Warranty: IES3110 series switch enjoys 5 years limited warranty against defect in
materials or workmanship. For more details about warranty, please check at
https://www.fs.com/policies/warranty.html
Return: If you want to return item(s), information on how to return can be found at
https://www.fs.com/policies/day_return_policy.html
5
Online Resources
Download https://www.fs.com/products_support.html
Help Center https://www.fs.com/service/fs_support.html
Contact Us https://www.fs.com/contact_us.html
RJ45 port is not in connectivity, or it is erroneous in
receiving/transmitting frames
1. Replace the twisted pair cable.
2. Check that the port configuration has the common working mode with
the connected switch.
Connecting the Switch Remotely Unsuccessfully
1. Test network connectivity through ping.
2. If the network is reachable, try restarting the switch.
3. Check if the corresponding service is enabled.
The Port is not Working, the LED indicator is off
1. Ensure the switch ports are in the no shutdown state.
2. Check if the switch can read the DDM information.
3. Check if the port speed setting is correct.
4. Try looping the switch cable.
Ce manuel convient aux modèles suivants
2
Table des matières
Langues :
Autres manuels FS Changer
FS
FS S3700-24T4F Mode d’emploi
FS
FS S3260-8T2FP Manuel utilisateur
FS
FS S1150-8T2F Manuel utilisateur
FS
FS S5300-12S Manuel utilisateur
FS
FS S5900-24S4T2Q Guide rapide
FS
FS IES5100-24FS Manuel utilisateur
FS
FS S5860-24XB-U Manuel utilisateur
FS
FS S3700-24T4F Mode d’emploi
FS
FS S1900-5T Manuel utilisateur
FS
FS PoE+ Series Mode d'emploi
FS
FS S5860 Series Manuel utilisateur
FS
FS S5810 Series Manuel utilisateur
FS
FS S3700-24T4F Mode d’emploi
FS
FS S5800-48F4SR-DC Manuel utilisateur
FS
FS PoE+ Series Manuel utilisateur
FS
FS Fiberstore S8050-20Q4C Manuel utilisateur
FS
FS S3700-24T4F Mode d’emploi
FS
FS S2800S Series Manuel utilisateur
FS
FS S5800-48F4S Manuel utilisateur
FS
FS S5850-24XMG-U Series Manuel utilisateur
