Fortinet FortiMail-5001A Manuel utilisateur

5001A

ASM-S08

OOS

ACT/RDY

PORT

Straight-through

Ethernet cables

Console Cable

ools and Documenation

ASM-S08

OOS

ACT/RDY

PORT

ASM-S08 storage module

Grounded wrist band

FortiMail-5001A

Hardware Guide

Trademarks

Products mentioned in this document are trademarks.

5001A

ASM-S08

OOS

ACT/RDY

PORT

5001A

ASM-S08

OOS

ACT/RDY

PORT

Port1 and Port2

10/100/1000

Copper Interfaces

USB

Fabric and Base

network activity

LEDs

AMC slot with ASM-S08

(80GB storage)

RJ-45

Console

Extraction

Lever

Retention

Screw

Extraction

Lever

Retention

Screw

IPM

LED

(board

position)

ACC

OOS

Power

Status

LEDs

For more information

• Documentation CD: all major FortiMail documents

• Fortinet Technical Documentation: http://docs.fortinet.com

• Fortinet Knowledge Base: http://kb.fortinet.com

• Fortinet Technical Support: http://support.fortinet.com

Trademarks

Products mentioned in this document are trademarks or registered

trademarks of their respective holders.

Regulatory Compliance

FCC Class A Part 15, CE, and UL

Version 4.0

9 February 2010

http://www.fortinet.com

QuickStart Guide

FortiMail-5001A

Package Contents

Connectors

Factory default settings

Connector Type Speed Protocol Description

1, 2 RJ-45 10/100/1000

Base-T Ethernet Copper 1-gigabit connection to

10/100/1000Base-T copper

networks.

CONSOLE RJ-45 9600 bps

8/N/1 RS-232

serial Serial connection to the

command line interface.

USB USB Backing up or restoring mail data

in Server mode. For details, see

the FortiMail Administration

Guide on the documentation CD.

Default mode Gateway mode

Administrator

account on Port 1

User name/

Password: admin/(No password)

Web-based

manager URL: https://192.168.1.99/admin

Management Access HTTPS, Ping, SSH

LED descriptions

LED State Description

1, 2

(Left LED)

Green Port has power and network connection.

Flashing Green Network activity at the interface.

Off No link is established.

1, 2

(Right LED)

Green Connection at 1 Gbps.

Amber Connection at 100 Mbps.

Off Connection at 10 Mbps.

Base CH0/CH1 Green Base backplane interface 0 (base1)/interface 1 (base2) is connected at 1 Gbps.

Flashing Green Network activity.

Fabric CH0/CH1 Off Fabric backplane interface 0 (fabric1)/interface 1(fabric2) is connected at 10 Gbps.

Flashing Green Network activity.

ACC Off or Flashing green Flashes green when the FortiMail-5001A board accesses the FortiOS flash disk. The FortiOS flash disk stores the

current FortiOS firmware build and configuration files. The system accesses the flash disk when starting up, during a

firmware upgrade, or when an administrator is using the CLI or GUI to change the FortiOS configuration. Under normal

operating conditions this LED flashes occasionally, but is mostly off.

OOS

(Out of

Service)

Off Normal operation.

Green A fault condition exists and the FortiMail-5001A blade is out of service (OOS). This LED may also flash very briefly

during normal startup.

Power Green The FortiMail board is powered on.

Status Off The FortiMail board is powered on.

Flashing Green The FortiMail-5001A system is starting up. If this LED is flashing at any time other than system startup, a fault condition

may exist.

IPM Blue The FortiMail-5001A system is ready to be hot-swapped (removed from the chassis). If the IPM light is blue and no

other LEDs are lit the FortiMail-5001A board has lost power.

Flashing Blue The FortiMail-5001A system is changing from hot swap to running mode or from running mode to hot swap. This

happens when the FortiMail-5001A system is starting up or shutting down.

Off Normal operation. The FortiMail-5001A board is in contact with the chassis backplane.

Installing and deploying the FortiMail unit

Check the FortiMail Install Guide to learn more about how to

install the FortiMail board onto a FortiGate 5000 series chassis

and how to deploy the unit into your network

Configuring the FortiMail unit

Then you can configure detailed antispam, antivirus, and logging

settings to protect your mail servers and users. For details, see

the FortiMail online help or the FortiMail Administration Guide.

You can use one of the following tools to configure the FortiMail unit. If you are connecting and using the unit for the first time, it is

recommended you use the web-based manager only, because it comes with a quick start configuration wizard which can guide you

through the initial setup.

• Command Line Interface (CLI)

The FortiMail unit has a console port and you can use a RJ-45 to DB-9 console cable to connect it directly to your management

computer. For information about CLI commands, see the FortiMail CLI Reference on the documentation CD.

• Web-based manager

The web-based manager has two display modes: Basic and Advanced. The default mode when you first log on is Advanced. You can

switch between the two modes by clicking

Basic Mode >> or Advanced Mode >>.

In either mode, you can run the quick start configuration wizard to configure the basic network and antispam settings. For detailed

information about the quick start wizard, see the FortiMail Install Guide.

Configuration changes made with the web-based manager are effective immediately.

The FortiMail unit has the operation mode: gateway, transparent, and server. For details about operation modes and which mode you

should use, see the FortiMail Install Guide.

The default operation mode is gateway mode. You can change to transparent mode or server mode after connecting to the unit.

Changing operation mode causes system reboot.

Next Steps

Configuration Tool Overview

Interface settings General settings

Port 1: IP: ____.____.____.____

Netmask: ____.____.____.____

Port 2 IP: ____.____.____.____

Netmask: ____.____.____.____

Transparent

mode Management IP: ____.____.____.____

Administrator

password:

Network

Settings:

Default Gateway: ____.____.____.____

Primary DNS Server: ____.____.____.____

Secondary DNS Server: ____.____.____.____

Collecting Information

Installation and configuration of the FortiMail unit involves the

following steps. Installation details are described in the FortiMail

Install Guide on the documentation CD.

1. Installing the FortiMail-5001A board onto a FortiGate 5000

series chassis. For information about the chasis, see the

chasis guide on the documentation CD.

2. Connecting the unit to the network.

3. Powering up the unit.

4. Connecting to the web-based manager.

5. Selecting an operation mode: Gateway, Transparent, or

Server.

6. Running the QuickStart wizard to configure the basic settings.

7. For all other installation instructions, see the FortiMail Install

Guide on the documentation CD.

8. For all the configuration instructions, see the FortiMail

Administration Guide and the FortiMail online help.

9. If you want to use the CLI commands to configure the unit, see

the FortiMail CLI Reference on the documentation CD.

Installation Overview

Autres manuels pour FortiMail-5001A

Autres manuels Fortinet Matériel réseau

Fortinet

Fortinet FortiDB-400B Manuel utilisateur

Fortinet

Fortinet FortiAnalyzer 200D Manuel utilisateur

Fortinet

Fortinet FortiWAN 1000E Manuel utilisateur

Fortinet

Fortinet FortiDeceptor Rugged 100G Manuel utilisateur

Fortinet

Fortinet FortiToken-400 Manuel utilisateur

Fortinet

Fortinet FortiLog-400 Manuel utilisateur

Fortinet

Fortinet FortiMonitor 100F Manuel utilisateur

Fortinet

Fortinet FortiManager 3700G Manuel utilisateur

Fortinet

Fortinet FortiLog-100 Manuel utilisateur

Fortinet

Fortinet FortiLog-800 Manuel utilisateur

Fortinet

Fortinet FortiGate 600F Series Manuel utilisateur

Fortinet

Fortinet FortiSwitch 1024E Series Manuel utilisateur

Fortinet

Fortinet FortiMail 3000F Manuel utilisateur

Fortinet

Fortinet FortiAnalyzer 800G Manuel utilisateur

Fortinet

Fortinet FortiGate 94D PoE Manuel utilisateur

Fortinet

Fortinet FortiADC 2200F Manuel utilisateur

Fortinet

Fortinet FortiGate FortiGate-ASM-FB4 Mode d’emploi

Fortinet

Fortinet FortiGate-5000 Manuel de référence

Fortinet

Fortinet FortiManager 200D Manuel utilisateur

Fortinet

Fortinet FortiAP 431F Manuel utilisateur

Fortinet

Fortinet FortiMail 2000F Manuel utilisateur

Fortinet

Fortinet FortiGate 30D Manuel utilisateur

Fortinet

Fortinet FortiAnalyzer 3700G Manuel utilisateur

Fortinet

Fortinet FortiGate 80F Series Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur