Flying Industry Development S1F2-DC06 Manuel utilisateur

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control DC Motor Controller / Transmitter & Receiver

This DC motor controller system includes one transmitter and two controllers. You can use one transmitter to remote control two DC motors

(DC6V/9V/12V/24V) rotation in positive/ reversal direction. You also can connect two restrictive switches to each receiver and use them to stop

motor rotation.

Package Include:

2 x Receiver: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24

1 x Transmitter: CV-6-2

1 x User manual

Features:

Wireless control, easy to install

Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with

voltage DC6V / 9V / 12V / 24V.

You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the

wireless signal can pass through walls, floors and doors.

Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.

One/several transmitters can control one/several receivers simultaneously.

If you use two or more receivers in the same place, you can set them with different codes.

Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24

Coding Type: Fixed code or learning code

Coding Setting: By learning

Power Supply (Operating Voltage): DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)

Output: DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)

Case Size: 74mm x 54mm x 28mm

Quiescent Current: 5mA

Rated Current: 5A

The Maximum Instantaneous Current of Starting Motor: 10A

Transmitter:

Model No.: 0021052(CV-6-2)

Channel: 6 CH

Remote Control Distance: 500m / 1500ft (theoretically)

Encode: Fixed code by Soldering

Unit size: 110mm x 50mm x 18mm

Power Supply: 1 x 23A -12V battery (Included, can be used for 12 months)

Usage:

Power supply:

Connect power supply DC6V / 9V / 12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”. You can exchange the output wires of

motor to change the rotating direction of motor.

Setting control mode Latched: Connect Jumper S1

Function of transmitter:

Press button ▲, ▼,on the left to control receiver 1; Press button ▲, ▼,on the right to control receiver 2.

Press button ▲on remote: terminal “Output” output DC power, motor rotates in positive direction.

Press button ▼on remote: terminal “Output” output DC power, motor rotates in reversal direction.

Press button on remote: motor stops.

Function of manual buttons in receiver:

Press button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction.

Press button K1 in receiver: terminal “Output” output DC power, motor rotates in reversal direction.

Press button K2 in receiver: motor stops.

Setting control mode Momentary: Connect Jumper S2

Function of transmitter:

Press button ▲, ▼on the left for remote control receiver 1; Press button ▲, ▼on the right for remote control receiver 2;

Press and hold button ▲on remote: terminal “Output” output DC power, motor rotates in positive direction. Release button: motor stops.

Press and hold button ▼on remote: terminal “Output” output DC power, motor rotates in reversal direction. Release button: motor stops.

Function of manual buttons in receiver:

Press and hold button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction. Release button: motor stops.

Press and hold button K1 in receiver: terminal “Output” output DC power, motor rotates in reversal direction. Release button: motor stops.

Restrictive function:

You can connect two restrictive switches to terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the motor will work normally; i

f the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1” is connected, the

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

motor will work in reversal direction; when the restrictive switch “X1” is disconnected, motor will stop automatically. When the restrictive switch

“X2” is connected, the motor will work in positive direction; when the restrictive switch “X2” is disconnected, motor will stop automatically.

When you don't want to use the restrictive switches, you need to connect the terminals “X1” and “X2”by two wires.

Learning the button of transmitter:

1) Press and hold “K3”button of receiver 1; when signal LED on the receiver 1 is on, release “K3”button. Press the left ▲button of transmitter