Flying Industry Development 0021112 Manuel utilisateur

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

4 Buttons 50M RF Remote Control Cloning / Duplicator With Sliding Cover

Description:

4 channel rf wireless remote control duplicator for cars, garage doors, gate doors, alarm systems, etc. This is a fixed frequency remote cloner

(315/433MHz) for copying most common fixed and learning code remote controls. Clone up to 4 remote signals from 4 different remotes.

Duplicate your existing remote controllers so you always have a backup.

Product Description:

Model No.: 0021112 (XB-4C)

With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.

Shell Color：Black

Channel/Button: 4

Button Symbol: Lock/ Unlock/ Lightning/ Bell

Operating Voltage: 12V (1 x 27A -12V battery, can be used for 12 months)

Operating Current: 4mA

Operating Frequency: 315 Mhz/ 433Mhz

It can clone code remote controls with IC, such as 2262, 2260, 2264, 5026-1, 5026-2, 5026-3, 5026-4, FP527, SMC918, PT2240, EV1527,

HT12D, HT12E, etc.

It cannot clone rolling code remote controls with IC, such as HCS300, HCS301.

Transmitting Distance: 50m / 150ft (theoretically)

The distance of 50m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be

hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or

may not reach 50m.

Modulation Mode: ASK

Operating Temperature: -20 °C to +70 °C

Unit Size: 58mm x 33mm x 15mm

Weight: 30g

Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

Operation:

Clear out the original code:

Press the two top buttons for 3 seconds until the red LED flashes.

Clone the code:

Put the clone remote and the original remote close together/side by side so that they are touching. The distance should be less than 10mm. Then

press and hold the button you want to clone on your original remote and any one of the buttons on the clone remote for 3 seconds until the LED

on the clone remote flashes continuously. That means cloning successfully.

Note: The best clone position is according to the original remote control. If cloning is failed, you should try more several times by putting two

remote controls at different positions, such as head to head, or head to tail. As the following picture shows:

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

How to test the original code being cleared out:

After you clear out the original code, you press any one of the buttons on the clone remote. If the red led flashes quick and goes out immediately,

which means the original code has been cleared out completely. If the red led brightens all the time, which means the original code is still in the

remote.

How to restore the state if you clear out the code mistakenly:

Press two buttons on the 2nd line of remote for 3 seconds until the red LED flashes.

Notes:

1. With this remote cloner you can clone most common fixed and learning code remote controls with IC such as 2262, 2260, 2264, 5026-1,

5026-2, 5026-3, 5026-4, FP527, SMC918, PT2240, EV1527, HT12D, HT12E, etc. But it cannot clone rolling code remote controls with IC such as

HCS300, HCS301.

2. You must clear out the original code before you clone the code.

3. Oscillating resistance is no need to be considered. The clone remote control is compatible with the oscillating resistance automatically.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Flying Industry Development Télécommande

Flying Industry Development

Flying Industry Development S1DA-DC09 Manuel utilisateur

Flying Industry Development

Flying Industry Development 15S1PXB-DC12+1CP-15 Manuel utilisateur

Flying Industry Development

Flying Industry Development S2T-DC06-ANT1 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1PX-DC-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1PF3-DC12 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020386 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020057 Manuel utilisateur

Flying Industry Development

Flying Industry Development Z-06 Manuel utilisateur

Flying Industry Development

Flying Industry Development 00200261 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020794 Manuel utilisateur

Flying Industry Development

Flying Industry Development 6S2UB-DC12+1CV-12 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1XB-DC06-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1F2-DC06 Manuel utilisateur

Flying Industry Development

Flying Industry Development S2PX-DC09-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development 3S2UB-DC12+CV-6 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1PF-DC12 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1X-DC06 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1XB-AC220-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1X2-DC Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020167 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020080 Manuel utilisateur

Flying Industry Development

Flying Industry Development S2T-DC06-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1T-AC110 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1UD-DC06 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation