Flying Industry Development 0020167 Manuel utilisateur

SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD

http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control Kit (Model 0020167)

Package Include:

1 x Receiver: S2T-DC06-ANT3 / S2T-DC09-ANT3 / S2T-DC12-ANT3 / S2T-DC24-ANT3

2 x Transmitter: CWB-2

1 x User manual

Feature:

Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship,

offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks,

motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.

Wireless control, easy to install.

Power Supply: Four working voltage versions, DC 6V, 9V, 12V, 24V.

Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipments. The output terminals are NO / NC (normally

open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.

Each channel can work at maximum current 10A, such as 120W/12V, 60W/6V, 90W/9V, 240W/24V, 1100W/110V, 2200W/220V.

With external telescopic antenna, the receiver have a farther working range.

You can control the equipments by using the receiver with transmitter (remote control) from any place within a reliable distance.

Wireless RF signal can pass through walls, floors, doors or windows.

With reverse power protection and over current protection.

Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.

One/several transmitters can control one/several receivers simultaneously.

You can use two or more units in the same place.

Receiver Parameters:

Model No.: S2T-DC06 / S2T-DC09 / S2T-DC12 / S2T-DC24

Power Supply (Operating Voltage): DC6V (S2T-DC06), DC12V±1V (S2T-DC12), DC9V±1V (S2T-DC09), DC24V±2V (S2T-DC24)

Output: Relay output (Normally open and normally closed)

Working Voltage Range of Relay: AC110~240V or DC0~28V

Wire range for the terminals: 22-14 AWG

Working Frequency: 433.92MHz

Channel: 2 CH

Control Modes: Self-locking (Press -> On; Press again -> Off)

Static Current: ≤6mA

Maximum Working Current: 10A / each channel

PCB size: 67mm x 50mm x 18mm

Case size: 75mm x 54mm x 27mm

Transmitter Parameters:

Model No.: 0021093 (CWB-2)

Waterproof

Shell Color: Black

Channel/Button: 2

Button Symbol: A, B

Operating Voltage: 6V (2 x CR2016 -3V button cell batteries, can be used for 12 months)

Operating Current: 5mA

Operating Frequency: 433Mhz

Encoding Chip: PT2260/ PT2262 / PT2264

Encoding Type: Fixed code by soldering, up to 6561 codes

Transmitting Distance: 50m / 150ft (theoretically)

The distance of 50m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be

hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may

not reach 50m.

Modulation Mode: ASK

Operating Temperature: -20 ° C to +70 ° C

Unit Size: 56mm x 32mm x 12mm

Weight: 20g

Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

Matching Transmitters:

The receiver can work with different transmitters, such as model C-2 (100M), CWB-2 (50M, waterproof), or CB-2 (1000M) etc.

Working Range:

With a transmitter (such as CWB-2) to form a complete set, the maximum working distance can reach 50M in an open ground.

The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will

be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this

maximum working distance.

If you want to have a further working range, you can use a powerful transmitter, such as CB-2 transmitter.

SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD

http://www.carymart.com E-Mail: sale@carymart.com

Usage (with the transmitter CWB-2):

The receiver can be used to control both DC 0~28V and AC 110~240V equipments.

Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals B and C are Normally Open; Terminals

A and B are Normally Closed.

Wiring:

1) If you want to control a DC 12V lamp, do as following:

1.1 Connect the positive pole of DC power supply to terminal “L / +” of INPUT, and connect the negative pole of DC power supply to terminal “N / -” of

INPUT.

1.2 Connect terminal B to the positive pole of DC power supply, connect terminal C to the positive pole of DC lamp, and connect the negative pole of

DC lamp to the negative pole of DC power supply.

2) If you want to control an AC 220V lamp, do as following:

2.1 Connect the positive pole of DC power supply to terminal “L / +” of INPUT, and connect the negative pole of DC power supply to terminal “N / -” of

INPUT.

2.2 Connect terminal B to the live wire of AC power supply, connect terminal C to one side of AC lamp, and connect another side of AC lamp to the

neutral wire of AC power supply.

Operating:

Press button A of the transmitter: The relay 1 is activated (connect the terminals B and C, disconnect the terminals A and B), and the lamp 1 is turned on.

Press button A again: The relay 1 is deactivated (disconnect the terminals B and C, connect the terminals A and B, and the lamp 1 is turned off.

Press button B of the transmitter: The relay 2 is activated (connect the terminals B and C, disconnect the terminals A and B), and the lamp 2 is turned on.

Press button B again: The relay 2 is deactivated (disconnect the terminals B and C, connect the terminals A and B, and the lamp 2 is turned off.

How to pair the transmitter to the receiver:

1) Press the learning button of receiver for 1- 2 seconds; signal LED on the receiver is on. The receiver enters into status of LEARNING.

2) Press any one button on transmitter. If signal LED flashes quickly 15 times and turns off, it means learning is successful.

3) When receiver is in the status of LEARNING, press again the learning button, signal LED turns off, learning process will be discontinued.

4) The receiver can learn several remote controls with different codes.

Delete all transmitters:

We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote

controls, which are stored in the receiver.

Operation: Press and hold the learning button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all

stored codes have been deleted successfully.

SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD

http://www.carymart.com E-Mail: sale@carymart.com

Control DC Lamp

Button

Signal LED

Power LED

Antenna

RF module

Antenna

RF module

Power LED

Signal LED

Beeper

Relay 1

Relay 2

Relay 1

Relay 2

Neutral wire

Live wire

DC Power supply

A, B=Normally Closed; B, C=Normally Open.

Lamp 1

Lamp 2

DC Power supply

A, B=Normally Closed; B, C=Normally Open.

Lamp 1

Lamp 2

AC Power supply

Control AC Lamp

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Flying Industry Development Télécommande

Flying Industry Development

Flying Industry Development 0020130 Manuel utilisateur

Flying Industry Development

Flying Industry Development S2PX-DC09-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development 6S2UB-DC12+1CV-12 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020109 Manuel utilisateur

Flying Industry Development

Flying Industry Development Z-06 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020386 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1PF3-DC12 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1X-DC06 Manuel utilisateur

Flying Industry Development

Flying Industry Development S4PUA-AC220 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020210 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020057 Manuel utilisateur

Flying Industry Development

Flying Industry Development 3S2UB-DC12+CV-6 Manuel utilisateur

Flying Industry Development

Flying Industry Development 00200261 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1XB-AC220-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development S2U-DC06-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0020080 Manuel utilisateur

Flying Industry Development

Flying Industry Development 0021112 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1UD-DC06 Manuel utilisateur

Flying Industry Development

Flying Industry Development S2T-DC06-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1PS1-DC06-ANT2 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1XB-DC06 Manuel utilisateur

Flying Industry Development

Flying Industry Development 4S1PFC-AC220+CV-8-3 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1PF-DC12 Manuel utilisateur

Flying Industry Development

Flying Industry Development S1UD-DC06 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation