Fluke 434-II Guide de configuration

Manual Supplement

© 2017 Fluke Corporation. All rights reserved. 

Manual Title: Fluke 434-II/435-II/437-II/438-II Service Supplement Issue: 1

Part Number: 4822 872 05408 Issue Date: 9/17

Print Date: February 2013 Page Count: 1

Revision/Date: 1, 5/17

This supplement contains information necessary to ensure the accuracy of

the above manual.

Fluke 434-II/435-II/437-II Service Manual Supplement

9/17 1

Change #1, 470

On the Cover of the Manual, change:

From: Fluke 434-II/435-II/437-II Service

To: Fluke 434-II/435-II/437-II/438-II Service

On page 4-6, under 4.7.2, replace step 3 with:

3. Connect the LO output (black) with the Ground (green) input of the Analyzer.

Connect the HI output (red) with all current (BNC) inputs and the A/L1, B/L2, C/L3, and N

voltage banana inputs of the Analyzer. Refer to Figure 4.1.

On pages 4-8 & 4-9, under 4.8.1 replace steps 2 & 3 with:

2. To check the A/L1, B/L2, C/L3 inputs, connect the N input to Ground (See Figure 4-2). N now

will give zero reading.

3. To check the N input, connect the N input with the adjacent C/L3 input. A/L1, B/L2, C/L3 now

will give zero reading. Refer to Figure 4-3.

On page 4-10, under 4.8.2, replace steps 2 & 11 with:

2. To check the A/L1, B/L2, C/L3 inputs: connect the N input to Ground (See Figure 4-2).

11. Connect the N input with the C/L3 input (See Figure 4-3). A/L1, B/L2, C/L3 now give zero

reading.

On page 4-11, under 4.8.3, replace steps 2 & 11 with:

2. To check the A/L1, B/L2, C/L3 inputs: connect the N input to Ground (See Figure 4-2).

11. Connect the N input with the C/L3 input (See Figure 4-3). A/L1, B/L2, C/L3 now give zero

reading.

On page 4-13, under 4.8.4, replace steps 2 & 11 with:

2. To check the A/L1, B/L2, C/L3 inputs: connect the N input to Ground (See Figure 4-2).

11. Connect the N input with the C/L3 input (See Figure 4-3). A/L1, B/L2, C/L3 now give zero

reading.

On page 4-15, under 4.8.5, replace steps 1 & 10 with:

1. To check the A/L1, B/L2, C/L3 inputs: connect the N input to Ground (See Figure 4-2).

10. Connect the N input with the C/L3 input (See Figure 4-3). A/L1, B/L2, C/L3 now give zero

reading.

On page 4-17, under 4.9, replace step 3 with:

3. Short-circuit the four current inputs with a termination piece of 50 Ω or lower. Refer to Figure 4-4.

Note

The 438 II model should now follow the 435 II steps in the verification and Adjust

procedures.

Autres manuels pour 434-II

1

Ce manuel convient aux modèles suivants

3

Autres manuels Fluke Instrument de mesure

Fluke

Fluke i410 Manuel utilisateur

Fluke

Fluke VR101 Manuel utilisateur

Fluke

Fluke QA-ES III Manuel de la liste des pièces

Fluke

Fluke i3000s Flex Series Manuel utilisateur

Fluke

Fluke 2620A Manuel utilisateur

Fluke

Fluke FOM Instructions d'utilisation et d'installation

Fluke

Fluke 1.4 MPA PPC4E Manuel utilisateur

Fluke

Fluke 374 Manuel utilisateur

Fluke

Fluke i400s Manuel utilisateur

Fluke

Fluke ProcessMeter 787 Manuel d'utilisation et d'entretien

Fluke

Fluke BT520 Manuel utilisateur

Fluke

Fluke SMFT-1000 Manuel utilisateur

Fluke

Fluke 323 Manuel utilisateur

Fluke

Fluke 789 Manuel du propriétaire

Fluke

Fluke a3000 FC Manuel utilisateur

Fluke

Fluke VR1710 Manuel utilisateur

Fluke

Fluke 381 Manuel utilisateur

Fluke

Fluke MultiFiber Pro Manuel utilisateur

Fluke

Fluke 411D Instructions d'installation et d'utilisation

Fluke

Fluke 1550 Manuel d'utilisation et d'entretien

Fluke

Fluke 377 Manuel utilisateur

Fluke

Fluke 376 Manuel utilisateur

Fluke

Fluke 983 Manuel utilisateur

Fluke

Fluke ScopeMeter 124B Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur