Fluke 374 Manuel utilisateur

PN 3608883

July 2010

All product names are trademarks of their respective companies.

374/375/376

Clamp Meter

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for three

years from the date of purchase. This warranty does not cover fuses, disposable

batteries, or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to extend

any other warranty on Fluke’s behalf. To obtain service during the warranty period,

contact your nearest Fluke authorized service center to obtain return authorization

information, then send the product to that Service Center with a description of the

problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS

FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE

IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the exclusion or limitation of an

implied warranty or of incidental or consequential damages, this limitation of liability

may not apply to you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

Table of Contents

Title Page

Introduction................................................................................................................. 1

How to Contact Fluke ................................................................................................. 2

Safety Information ...................................................................................................... 3

The Meter ................................................................................................................... 9

Specifications ............................................................................................................. 19

Electrical Specifications.......................................................................................... 19

Mechanical Specifications ...................................................................................... 26

Environmental Specifications ................................................................................. 27

374, 375, 376

Users Manual

Introduction

XWWarning

Read "Safety Information" before you use the Meter.

The Fluke 374, 375, and 376 (the Meter) measure true-rms ac current and voltage, dc current

and voltage, inrush current, resistance, and capacitance. The 375 and 376 also measure

frequency and dc millivolts. The detachable iFlex (Flexible Current Probe) that is included with the

376 (optional with the 374 and 375) expands the measurement range to 2500 A ac. The Flexible

Current Probe provides increased display flexibility and allows measurements of awkward sized

conductors and improved wire access. The illustrations in this manual show the 376.

374, 375, 376

Users Manual

How to Contact Fluke

To contact Fluke, call one of the following telephone numbers:

•Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)

•Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)

•Canada: 1-800-36-FLUKE (1-800-363-5853)

•Europe: +31 402-675-200

•Japan: +81-3-3434-0181

•Singapore: +65-738-5655

•Anywhere in the world: +1-425-446-5500

Or, visit Fluke's website at www.fluke.com.

To register your product, visit http://register.fluke.com.

To see, print, or download the latest manual supplement, visit

http://us.fluke.com/usen/support/manuals.

Clamp Meters

Safety Information

A Warning identifies conditions and actions that pose hazard(s) to the user. A Caution identifies

conditions and procedures that could cause Meter damage, equipment under test damage, or

permanent loss of data.

Symbols used on the Meter and in this manual are explained in Table 1.

XWWarning

To prevent possible electrical shock or personal injury, follow these guidelines:

•Use the Meter only as specified in this manual or the protection provided by the

Meter can be compromised.

•Examine the case before you use the Meter. Look for cracks or missing plastic.

Carefully look at the insulation around the connectors.

•Never measure current while the test leads are inserted into the input jacks.

•Make sure the battery door is closed and latched before operating the Meter.

•Remove the test leads from the Meter before the battery door is opened.

•Examine the test leads for damaged insulation or exposed metal. Check test lead

continuity. Replace damaged test leads before using the Meter.

•Do not use the Meter if it operates incorrectly. Protection can be compromised.

When in doubt, have the Meter serviced.

374, 375, 376

Users Manual

•Do not use the Meter around explosive gas, vapor or in damp or wet

environments.

•Use only type AA batteries, properly installed in the Meter case, to power the

Meter.

•When measuring current with the Jaw, keep fingers behind the Tactile Barrier.

See "The Meter" .

•To avoid false readings that can lead to electrical shock and injury, replace the

batteries as soon as the low battery indicator () appears.

•When servicing the Meter, use only specified replacement parts.

•Have the Meter serviced only by qualified service personnel.

•Be careful around voltages > 30 V ac rms, 42 V ac peak, or 60 V dc. Such

voltages pose a shock hazard.

•Do not apply more than the rated voltage, as marked on the Meter, between the

terminals or between any terminal and earth ground.

•When using the probes, keep fingers behind the finger guards on the probes.

•Connect the common test lead before connecting the live test lead. When

disconnecting test leads, disconnect the live test lead first.

•Do not work alone so assistance can be rendered in an emergency.

•Use extreme caution when working around bare conductors or bus bars. Contact

with the conductor could result in electric shock.

Clamp Meters

Safety Information

•Adhere to local and national safety codes. Individual protective equipment must

be used to prevent shock and arc blast injury where hazardous live conductors

are exposed.

•Disconnect circuit power and discharge all high-voltage capacitors before you

measure resistance, continuity, or capacitance.

•For the 374 and 375, do not measure ac/dc current in circuits carrying more than

1000 V or 600 A with the Meter Jaw.

•For the 376, do not measure ac/dc current in circuits carrying more than 1000 V

or 1000 A with the Meter Jaw.

•Never operate the Meter with the back cover removed or the case open.

•Do not measure ac current in circuits carrying more than 1000 V or 2500 A with

the Flexible Current Probe.

•Do not apply the Flexible Current Probe around or remove from HAZARDOUS

LIVE conductors.

•Do not use the flexible current sensor if the inner contrasting insulation color is

showing.

•Take special care during fitting and removal of the Flexible Current Probe. De-

energize the installation under test or wear suitable protective clothing.

374, 375, 376

Users Manual

WCaution

To avoid possible damage to the Meter or to equipment under test:

•Use the proper jacks, function, and range for the measurement application.

•Clean the case and accessories with a damp cloth and mild detergent only.

Do not use abrasives or solvents.

Table 1. Symbols

Symbol Meaning Symbol Meaning

BAC (Alternating Current) JEarth ground

FDC (Direct Current) ~

Do not dispose of this product as

unsorted municipal waste. Go to

Fluke’s website for recycling

information.

XHazardous voltage PConforms to European Union

directives.

Autres manuels pour 374

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fluke Instrument de mesure

Fluke

Fluke 321 Manuel d'utilisation et d'entretien

Fluke

Fluke 321 Manuel technique

Fluke

Fluke 481-DESI Manuel utilisateur

Fluke

Fluke PM6669 Manuel utilisateur

Fluke

Fluke 323 Manuel utilisateur

Fluke

Fluke DSX-600 CableAnalyzer Manuel utilisateur

Fluke

Fluke 373 Manuel utilisateur

Fluke

Fluke i1000s Guide de référence

Fluke

Fluke i1000s Guide de configuration

Fluke

Fluke ScopeMeter 125 Manuel utilisateur

Fluke

Fluke RUSKA 2482 Manuel utilisateur

Fluke

Fluke 772 Manuel utilisateur

Fluke

Fluke RaySafe 452 Manuel utilisateur

Fluke

Fluke 633 QuickCHECK-T1 Manuel utilisateur

Fluke

Fluke 8050A Manuel utilisateur

Fluke

Fluke IRR1-SOL Manuel utilisateur

Fluke

Fluke FiberInspector Pro FI-3000 Manuel utilisateur

Fluke

Fluke NORMA 4000 Operators Manuel utilisateur

Fluke

Fluke 393 Manuel utilisateur

Fluke

Fluke 5790B Manuel utilisateur

Fluke

Fluke 353 Manuel utilisateur

Fluke

Fluke 1736 Guide de configuration

Fluke

Fluke 305 Manuel utilisateur

Fluke

Fluke 435-II Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur