Fluke 305 Manuel utilisateur

PN 4045148

June 2012

Specifications are subject to change without notice.

All product names are trademarks of their respective companies.

305

Clamp Meter

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for two

years from the date of purchase. This warranty does not cover fuses, disposable

batteries, or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to

extend any other warranty on Fluke’s behalf. To obtain service during the warranty

period, contact your nearest Fluke authorized service center to obtain return

authorization information, then send the product to that Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH

AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.

FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the exclusion or limitation of

an implied warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

Table of Contents

Title Page

Introduction................................................................................................................. 1

How to Contact Fluke ................................................................................................. 1

Safety Information ...................................................................................................... 2

The Clamp Meter........................................................................................................ 8

Electrical Specifications.......................................................................................... 16

Mechanical Specifications ...................................................................................... 17

Environmental Specifications ................................................................................. 17

305

Users Manual

Introduction

The Fluke 305 Clamp Meter (the Product) measures ac and dc voltage, ac current,

resistance, and continuity.

XWWarning

Read "Safety Information" before you use the Product.

How to Contact Fluke

To contact Fluke, call one of the following telephone numbers:

•Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)

•Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)

•Canada: 1-800-36-FLUKE (1-800-363-5853)

•Europe: +31 402-675-200

•Japan: +81-3-6714-3114

•Singapore: +65-6799-5566

•Anywhere in the world: +1-425-446-5500

305

Users Manual

Or, visit Fluke's website at www.fluke.com.

To register your product, visit http://register.fluke.com.

To see, print, or download the latest manual supplement, visit

http://us.fluke.com/usen/support/manuals.

Safety Information

A Warning identifies conditions and procedures that are dangerous to the user; A Caution

identifies conditions and procedures that could cause Product damage, equipment under test

damage, or permanent loss of data.

Table 1 shows the symbols used on the Product and in this manual.

XWWarning

To prevent personal injury, use the Product only as specified, or the

protection supplied by the Product can be compromised.

To prevent possible electrical shock, fire, or personal injury:

•Use only correct measurement category (CAT), voltage, and

amperage rated probes, test leads, and adapters for the

measurement.

•Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V dc.

Clamp Meter

Safety Information

•Carefully read all instructions.

•Hold the Product behind the tactile barrier. See The Clamp Meter,

item .

•Do not use test leads if they are damaged. Examine the test leads

for damaged insulation or exposed metal. Check test lead

continuity.

•Do not measure current while the test leads are in the input jacks.

•Do not use the Product around explosive gas, vapor, or in damp or

wet environments.

•Limit operation to the specified measurement category, voltage, or

amperage ratings.

•Do not work alone.

•Do not apply more than the rated voltage, between the terminals or

between each terminal and earth ground.

•Comply with local and national safety codes. Use personal

protective equipment (approved rubber gloves, face protection, and

flame-resistant clothes) to prevent shock and arc blast injury where

hazardous live conductors are exposed.

305

Users Manual

•Replace the batteries when the low battery indicator shows to

prevent incorrect measurements.

•The battery door must be closed and locked before you operate the

Product.

•Measure a known voltage first to make sure that the Product

operates correctly.

•Use only current probes, test leads, and adapters supplied with the

Product.

•Remove all probes, test leads, and accessories that are not

necessary for the measurement.

•Keep fingers behind the finger guards on the probes.

•Connect the common test lead before the live test lead and remove

the live test lead before the common test lead.

Clamp Meter

Safety Information

•Do not use and disable the Product if it is damaged.

•Do not use the Product if it operates incorrectly.

•Before each use, examine the Product. Look for cracks or missing

pieces of the clamp housing. Also look for loose or weakened

components. Carefully examine the insulation around the Jaws.

•Examine the case before you use the Product. Look for cracks or

missing plastic. Carefully look at the insulation around the

terminals.

•Read all safety Information before you use the Product.

•Remove batteries to prevent battery leakage and damage to the

Product if it is not used for an extended period.

•Remove batteries to prevent battery leakage and damage to the

Product if is to be stored above its operating temperature.

305

Users Manual

Table 1. Symbols

Symbol Meaning Symbol Meaning

AC (Alternating Current) JEarth ground

DC (Direct Current) ~

Do not dispose of this product as

unsorted municipal waste. Go to

Fluke’s website for recycling

information.

Note

This product complies with the

Regulation for the Administration

of the Recovery and Disposal of

Waste Electrical and Electronic

Products (China).

XHazardous voltage. Risk of

electric shock. PConforms to European Union

directives.

WRisk of Danger. Important

information. See Manual. TDouble insulated

Autres manuels pour 305

Table des matières

Autres manuels Fluke Instrument de mesure

Fluke

Fluke RaySafe 452 Manuel utilisateur

Fluke

Fluke 55XXA/COIL 50 Manuel utilisateur

Fluke

Fluke 923 Manuel utilisateur

Fluke

Fluke FIBER OneShot Manuel utilisateur

Fluke

Fluke ScopeMeter 225C Manuel utilisateur

Fluke

Fluke i1010 Manuel utilisateur

Fluke

Fluke MultiFiber Pro Manuel utilisateur

Fluke

Fluke 96000 Series Manuel utilisateur

Fluke

Fluke 985 Manuel utilisateur

Fluke

Fluke 190 Series II Manuel utilisateur

Fluke

Fluke 15B MAX Manuel utilisateur

Fluke

Fluke Nuclear Associates 76-907 Manuel utilisateur

Fluke

Fluke i3000s Flex Series Manuel utilisateur

Fluke

Fluke 5790A Manuel utilisateur

Fluke

Fluke 930 Manuel utilisateur

Fluke

Fluke 433 Manuel utilisateur

Fluke

Fluke 3000 FC Manuel utilisateur

Fluke

Fluke 985 Manuel utilisateur

Fluke

Fluke 80PK-26 Manuel utilisateur

Fluke

Fluke 773-II Manuel utilisateur

Fluke

Fluke 1620A DEWK Manuel utilisateur

Fluke

Fluke ProcessMeter 787B Manuel utilisateur

Fluke

Fluke 393 FC Manuel utilisateur

Fluke

Fluke 377 Manuel d'utilisation et d'entretien

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur