Fluke 3005-PR Manuel utilisateur

PN 3039217

July 2007

3005-PR

AC Current Clamp

Instruction Sheet

Introduction

The Fluke 3005-PR AC Current Clamp (“the Clamp”) is designed

for the Fluke 1750. Designed to meet the most stringent

demands in industry and electrical contracting, it also meets the

latest safety and performance standards.

Symbols

The table below lists the symbols used on the Clamp and/or in

this instruction sheet.

Symbol Description

~Do not dispose of this product as unsorted municipal

waste. Go to Fluke’s website for recycling information.

WRisk of danger. Important Information. See manual.

XHazardous Voltage. Risk of electric shock.

TDouble insulation.

,Application around and removal from HAZARDOUS

LIVE conductors is permissible.

@Underwriters Laboratories. Conforms to UL Canadian

and U.S. standards.

PComplies with the relevant European standards.

;Conforms to relevant Australian standards.

3005-PR English Instruction Sheet

Page 2

Safety Instructions

Please read this section carefully. It will familiarize you with the

most important safety instructions for handling the Clamp. In this

instruction sheet, a Warning identifies conditions and actions

that pose hazard(s) to the user. A Caution identifies conditions

and actions that may damage the Clamp or the test instruments.

WX Warning

The Clamp may only be used and handled by

qualified personnel. To avoid personal injury, follow

these precautions:

•To avoid electric shock, use caution during

installation; high voltages and currents may be

present in circuit under test.

•Do not use the Clamp if damaged. Always

connect to display device before it is installed

around the conductor.

•Use the Clamp only as specified in the

operating instructions; otherwise the safety

features may not protect you.

•Adhere to local and national safety codes.

Individual protective equipment must be used

to prevent the shock and arc blast injury where

hazardous live conductors are exposed.

•Before each use, inspect the Clamp. Look for

cracks or missing portions of the housing or

output cable insulation. Also look for loose or

weakened components.

•Use caution when working with voltages above

60 V dc, 30 V ac rms or 42 V ac peak. Such

voltages pose a shock hazard.

•Use of this equipment is designed to CAT III

standards. CAT III equipment is designed to

protect against the transients in the equipment

in fixed equipment installations, such as

distribution panels, feeders and short branch

circuits, and the lighting systems in large

buildings.

•Do not use the Clamp in wet environments or in

locations that hazardous gases exist.

•Do not hold the Clamp anywhere beyond the

tactile barrier, see Figure 1.

3005-PR English Instruction Sheet

Page 3

Tactile Barrier

ezk01.eps

Figure 1. 3005-PR AC Current Clamp

Operating Instructions

1. Connect the Clamp to the 1750 current input jack.

Verify that the 1750 has recognized that a current

Clamp is connected.

2. Place the Clamp around the conductor under test.

3. Observe and take measurements as required. Positive

output indicates that the current flow is in the direction

shown by the arrow on the Clamp.

Maintenance

Cleaning

Clean the Clamp periodically by wiping it with a damp cloth and

detergent. Do not use abrasive cleaners or solvents. Do not

immerse the Clamp in liquids.

Specifications

Electrical Specifications

Operating Range 5 A

Measurement Range 0.1 to 10 A

Transformation Ratio Voltage Output

Output Signal 400 mV/A (2 V @ 5 A)

3005-PR English Instruction Sheet

Page 4

Range Accuracy Phase Shift

0.1 to 1 A ≤2 % of Reading ± 1 mV -

1 to 5 A ≤1 % of Reading ± 1 mV ≤3 °

5 to 40 A ≤1 % of Reading ± 1 mV ≤2 °

Reference conditions: 20 °C to 26 °C, 20 to 75 % RH, external magnetic

field < 40 A/m, 48 to 65 Hz sine wave, distortion factor less than 1 %, no

dc component, no external current carrying conductor, test sample

centered. Load impedance 1 MΩ.

Overload 25 A Continuous

Frequency Range 40 to 10 kHz

Crest Factor 3 @ 10 A rms with an error (due to CF) of

3 %

Working Voltage 600 V rms

Common Mode Voltage 30 V rms

Influence of dc on ac signal dc current <20 A, < 5 %

Influence of Conductor

Position in Jaw 0.5 % of mV output @ 50.60 Hz

Influence of Frequency

40 to 1 kHz: 0.5 % of mV output

1 kHz to 10 kHz: 2 % or mV output

Mechanical Specifications

Dimensions 5.47 x 2.00 x 1.18 in. (139 x 51 x 30 mm)

Weight 6.5 oz (180 g)

Jaw Opening 0.83 in. (21 mm)

Maximum Conductor Size

Cable

Bus Bar

0.78 in. (20 mm)

0.78 in. x 0.19 in. (20 x 5 mm)

Case Protection IP 40 (IEC 60529)

Drop Test 1.0 m six sides to oak floor

Vibration MIL-PRF-28800F Class 2 random

Polycarbonate Material

Jaws

Case

Polycarbonate Red UL 94 V0

Polycarbonate ABS Gray: UL 94 V0

Output 1 ft round 2 conductor cable w/4-pin Lemo

connector

3005-PR English Instruction Sheet

Page 5

Environmental Specifications

Operating Temperature 14 °F to 131 °F (−10 °C to +55 °C)

Storage Temperature −40 °F to 158 °F (−40 °C to +70 °C)

Altitude

Non-operating:

Operating:

0 to 12,000 m

0 to 2000 m

Operating Relative

Humidity 10 °C to 35 °C 85 % RH (without roll-off

above 35 °C)

Influence of Temperature ≤150 ppm/ °K, or 0.15 % of mV output per

10 °K

Influence of Humidity ≤10 to 90 % RH: 0.2% of mV output per

10 °K @ 18 °C to 28 °C

Safety Specifications

Electrical

Conforms to EN/IEC 61010 and 61010-2-

032

600 V Cat. III, Pollution Degree 2

Electromagnetic

Compatibility

EN 50081-1 Class B

EN 50082-2 Electrostatic discharge;

IEC 61000-4-2

Radiated field IEC 61000-4-3

Fast transients IEC 61000-4-4

Magnetic field at 50/60 Hz IEC 61000-4-8

3005-PR English Instruction Sheet

Page 6

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and

workmanship for one year from the date of purchase. This

warranty does not cover fuses, disposable batteries, or damage

from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not

authorized to extend any other warranty on Fluke’s behalf. To

obtain service during the warranty period, contact your nearest

Fluke authorized service center to obtain return authorization

information, then send the product to that Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER

WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR

PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT

LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM

ANY CAUSE OR THEORY. Since some states or countries do

not allow the exclusion or limitation of an implied warranty or of

incidental or consequential damages, this limitation of liability

may not apply to you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

Table des matières

Autres manuels Fluke Instrument de mesure

Fluke

Fluke i310s Manuel utilisateur

Fluke

Fluke 931 Manuel utilisateur

Fluke

Fluke LS-1310 Manuel

Fluke

Fluke 3310-PR Manuel utilisateur

Fluke

Fluke ScopeMeter 123 Manuel utilisateur

Fluke

Fluke 80PK-26 Manuel utilisateur

Fluke

Fluke VIBGUARD compact Manuel utilisateur

Fluke

Fluke ESA609 Manuel utilisateur

Fluke

Fluke FindFiber Source Manuel utilisateur

Fluke

Fluke 525B Manuel utilisateur

Fluke

Fluke MultiFiber Pro Manuel utilisateur

Fluke

Fluke FOM Instructions d'utilisation et d'installation

Fluke

Fluke 3000A Flex 4 Manuel utilisateur

Fluke

Fluke 374 FC Manuel utilisateur

Fluke

Fluke 893A Manuel utilisateur

Fluke

Fluke 374 Manuel utilisateur

Fluke

Fluke 321 Manuel d'utilisation et d'entretien

Fluke

Fluke 3000 FC Manuel utilisateur

Fluke

Fluke Biomedical IDA-4 Plus Operators Manuel utilisateur

Fluke

Fluke PRO3000 Manuel utilisateur

Fluke

Fluke 3310-PR-TF-II Manuel utilisateur

Fluke

Fluke NORMA 6003 Manuel utilisateur

Fluke

Fluke DTX-1800 Manuel d'utilisation et d'entretien

Fluke

Fluke PRV240 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur