FieldServer FS-8700-72 Manuel utilisateur

APPLICABILITY & EFFECTIVITY

Effective for all systems manufactured after August 2 8

Driver Manual

(Supplement to the FieldServer Instruction Manual)

FS-87 -72 Secutron Modul-R

A Sierra Monitor Company

Driver Version:

1. 1

Document Revision:

FS-87 -72 Secutron Manual Table of Contents

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

TABLE OF CONTENTS

1. SECUTRON MODUL-R DRIVER DESCRIPTION ...........................................................3

2. DRIVER SCOPE OF SUPPLY.........................................................................................3

2.1. Supplied by FieldServer Te hnologies for this driver.................................................. 3

3. HARDWARE CONNECTIONS ........................................................................................4

4. CONFIGURING THE FIELDSERVER AS A SECUTRON MODUL-R DRIVER CLIENT ..5

4.1. Data Arrays/Des riptors ............................................................................................. 5

4.2. Client Side Conne tion Des riptors............................................................................ 6

4.3. Client Side Node Des riptors ..................................................................................... 6

4.4. Client Side Map Des riptors....................................................................................... 7

4.4.1. FieldServer Specific Map Descriptor Parameters.................................................... 7

4.4.2. Driver Specific Map Descriptor Parameters ............................................................ 7

4.4.3. Timing Parameters.................................................................................................. 7

4.4.4. Map Descriptor Example.........................................................................................

5. CONFIGURING THE FIELDSERVER AS A SECUTRON MODUL-R DRIVER SERVER 9

5.1. Data Arrays................................................................................................................ 9

5.2. Server Side Conne tion Des riptors ........................................................................ 10

5.3. Server Side Node Des riptors.................................................................................. 10

5.4. Server Side Map Des riptors ................................................................................... 11

5.4.1. FieldServer Specific Map Descriptor Parameters.................................................. 11

5.4.2. Driver Specific Map Descriptor Parameters .......................................................... 11

5.4.3. Map Descriptor Example....................................................................................... 12

APPENDIX A. ADVANCED TOPICS......................................................................................12

Appendix A.1. Event Fun tion or Condition Codes............................................................. 12

Appendix A.2. Panel Cir uit or Zone numbers.................................................................... 13

Appendix A.3. Panel Power-up, Restarts and Resets ........................................................ 14

Appendix A.4. Driver Messages, Error Messages and Optional Map Des riptors............... 14

FS-87 -72 Secutron Manual Page 3 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

1. Secutron Modul-R driver Description

The Se utron Modul-R driver allows the FieldServer to transfer data to and from a Client and a Server

panel on a single point to point network over RS-232 using Se utron Modul-R proto ol.

The proto ol is stri tly ommand/response with the Client polling a Server devi e. A Server devi e an

report the generation and learing of alarms to the polling Client. One panel an be onne ted per

FieldServer port. The driver supports networked panels onne ted to a single port. The server driver

only supports 10 panels due to memory limitations. A Server panel an onsist of up to 100 ir uits.

Whan an alarm is generated, a bit is set and when the alarm is leared, the bit is leared. The panel

number is identified by the Node_ID in the onfiguration file.

2. Driver Scope of Supply

2.1. Supplied by FieldServer Technologies for this driver

FieldServer Technologies PART # Description

FS-8917-16 Pigtail able for RJ45 Port

FS-8700-72 Driver Manual.

FS-87 -72 Secutron Manual Page 4 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

3. Hardware Connections

The FieldServer is onne ted to the panels as shown below.

Configure the panels a ording to manufa turer’s instru tions.

Conne tor Pinouts

RJ-45 Pin

From RJ-45 To Secutron

1 Brown Tx

8 White/Orange

5 Blue/white GND

FS-87 -72 Secutron Manual Page 5 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

4. Configuring the FieldServer as a Secutron Modul-R driver Client

For a detailed dis ussion on FieldServer onfiguration, please refer to the FieldServer Configuration

Manual. The information that follows des ribes how to expand upon the fa tory defaults provided in the

onfiguration files in luded with the FieldServer (See “. sv” files on the provided with the FieldServer).

This se tion do uments and des ribes the parameters ne essary for onfiguring the FieldServer to

ommuni ate with Se utron Modul-R panels.

The onfiguration file tells the FieldServer about its interfa es, and the routing of data required. In order

to enable the FieldServer for Se utron Modul-R driver ommuni ations, the driver independent

FieldServer buffers need to be de lared in the “Data Arrays” se tion, the destination devi e addresses

need to be de lared in the “Client Side Nodes” se tion, and the data required from the Servers needs to

be mapped in the “Client Side Map Des riptors” se tion. Details on how to do this an be found below.

Note that in the tables, * indi ates an optional parameter, with the bold legal value being the default.

4.1. Data Arrays/Descriptors

Section Title

Data_Arrays

Column Title Function Legal Values

Data_Array_Name Provide name for Data Array

Up to 15

alphanumeri

hara ters

Data_Format Provide data format. Ea h Data Array an only take

on one format.

Bit, Byte, Pa ked_Bit,

Uint16

Data_Array_Length

Number of Data Obje ts. Must be larger than the data

storage area required for the data being pla ed in this

array.

1-10,000

Example

// Data Arrays

Data_Arrays

Data_Array_Name, Data_Array_Format, Data_Array_Length

p1 1_devi es, Bit, 1

p1 1_fun tion, Byte, 1000

p1 69_restart, Bit, 1000

p1 69_fun tion, Byte, 100

p1 90_reset, Bit, 100

p1 90_fun tion, Byte, 100

The Poller Data Array will ontain non-zero data when ommuni ations with the panel is OK.

FS-87 -72 Secutron Manual Page 6 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

4.2. Client Side Connection Descriptors

Section Title

Conne tions

Column Title Function Legal Values

Port Spe ify through whi h port the devi e is

onne ted to the FieldServer P1-P8

Baud* Spe ify baud rate 150, 300, 1200, 2400, 4800, 96

(Vendor limitation)

Parity* Spe ify parity None (Vendor limitation)

Data_Bits* Spe ify data bits 8 (Vendor limitation)

Stop_Bits* Spe ify stop bits 1 (Vendor limitation)

Proto ol Spe ify proto ol used Se utron

Handshaking*

Spe ify hardware handshaking None

Example

// Client Side Conne tions

Conne tions

Port, Proto ol, Baud, Parity, Handshaking

P1, Se utron, 9600, None, None

4.3. Client Side Node Descriptors

Section Title

Nodes

Column

Title Function Legal Values

Node_Name Provide name for Node Up to 32 alphanumeri

hara ters

Node_ID Generi Node ID unique to port. Also used as panel

number. 0-999

Proto ol Spe ify proto ol used Se utron

Port Spe ify whi h port the devi e is onne ted to the

FieldServer P1-P8

Example

// Client Side Nodes

Nodes

Node_Name, Node_ID, Proto ol, Conne tion

Node_1, 1, Se utron, P1

Not all ports shown are ne essarily supported by the hardware. Consult the appropriate Instru tion

manual for details of the ports available on spe ifi hardware.

FS-87 -72 Secutron Manual Page 7 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

4.4. Client Side Map Descriptors

4.4.1. FieldServer Spe ifi Map Des riptor Parameters

Column Title Function Legal Values

Map_Des riptor_Name

Name of this Map Des riptor Up to 32 alphanumeri hara ters

Data_Array_Name Name of Data Array where data

is to be stored in the FieldServer

One of the Data Array names

from “Data Array” se tion above

Data_Array_Offset Starting lo ation in Data Array 0 to (Data_Array_Length-1) as

spe ified in “Data_Array” se tion

Fun tion Fun tion of Client Map

Des riptor Rdb , Passive_Client

Node_Name Name of Node to fet h data from One of the node names spe ified

in “Client Node Des riptor” above

Length

The number of devi es on the

ir uit the Map Des riptor must

dete t

0-999

Blo k_Type*

Used to enable pa ked bit when

using a Pa ked_Bit Data Array

on the Map Des riptor

Flag, -

4.4.2. Driver Spe ifi Map Des riptor Parameters

Column Title Function Legal Values

Se utron_Type Identifies the type of data the Map Des riptor

points to

Poller, Devi e,

Fun tion

Se utron_Cir uit

Identifies the ir uit or panel zone 0-99

4.4.3. Timing Parameters

Column Title Function Legal Values

S an_Interval Rate at whi h data is polled >= 0s

FS-87 -72 Secutron Manual Page 8 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

4.4.4. Map Des riptor Example.

Map_Descriptor_Name, Scan_Interval, Data_Array_Name,

Data_Array_Offset,

Function, Node_Name, Secutron_Type, Secutron_Circuit, Length

P1_poller, 0s, poller 0, Rdb , Node_1, poller, -, 1

P1 1_devi es, -, P1 1_devi es 0, Passive_Client, Node_1, devi e, 1, 200

P1 1_fun tion, -, P1 1_fun tion 0, Passive_Client, Node_1, fun tion, 1, 200

P1 69_restart, -, P1 69_restart, 0, Passive_Client, Node_1, devi e, 69, 100

P1 69_fun tion, -, P1 69_fun tion, 0, Passive_Client, Node_1, fun tion, 69, 100

P1 90_reset, -, P1 90_reset, 0, Passive_Client, Node_1, devi e, 90, 100

P1 90_fun tion, -, P1 90_fun tion, 0, Passive_Client, Node_1, fun tion, 90, 100

Any unique

name.

Name will

appear in

Bridge Map

Des riptor

status

information

s reens.

The rate at whi h

the driver polls the

panel.

A Data Array name

must be one found

under Data_Arrays.

Data from a ir uit

event will be stored

in the array at

Data_Array_Offset.

Fun tion must be

read for pollers

and all others

Passive_Client.

A name given

to the devi e

to whi h the

FieldServer is

onne ted.

The type of data

the Map

Des riptor points

to. Devi e data

ontains alarm

statuses. Fun tion

data ontains

ondition odes.

Refer to Appendix

A.1 for more

information.

The ir uit or

zone number

used to trap

in oming events

into the Map

Des riptor. See

Driver notes.

The number of

devi es on the

ir uit this Map

Des riptor an

dete t for in oming

events.

FS-87 -72 Secutron Manual Page 9 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

5. Configuring the FieldServer as a Secutron Modul-R driver Server

For a detailed dis ussion on FieldServer onfiguration, please refer to the FieldServer Configuration

Manual. The information that follows des ribes how to expand upon the fa tory defaults provided in the

onfiguration files in luded with the FieldServer (See “. sv” files provided with the FieldServer).

The onfiguration file tells the FieldServer about its interfa es, and the routing of data required. In order

to enable the FieldServer for Se utron Modul-R driver ommuni ations, the driver independent

FieldServer buffers need to be de lared in the “Data Arrays” se tion, the FieldServer virtual node(s) need

to be de lared in the “Server Side Nodes” se tion, and the data to be provided to the Client needs to be

mapped in the “Server Side Map Des riptors” se tion. Details on how to do this an be found below.

Note that in the tables, * indi ates an optional parameter, with the bold legal value being the default.

5.1. Data Arrays

Section Title

Data_Arrays

Column Title Function Legal Values

Data_Array_Name Provide name for Data Array Up to 15 alphanumeri

hara ters

Data_Format Provide data format. Ea h Data Array

an only take on one format.

Bit, Pa ked_Bit, Byte,

Uint16

Data_Array_Length

Number of Data Obje ts. Must be larger

than the data storage area required for

the data being pla ed in this array.

1-10,000

Example

// Data Arrays

Data_Arrays

Data_Array_Name, Data_Array_Format, Data_Array_Length

p1 1_devi es, Bit, 1

p1 1_fun tion, Byte, 1000

p1 69_restart, Bit, 1000

p1 69_fun tion, Byte, 100

p1 90_reset, Bit, 100

p1 90_fun tion, Byte, 100

FS-87 -72 Secutron Manual Page 1 of 15

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver. om

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver. om

5.2. Server Side Connection Descriptors

Section Title

Conne tions

Column Title Function Legal Values

Port Spe ify whi h port the devi e is onne ted

to the FieldServer P1-P8

Baud* Spe ify baud rate 150, 300, 1200, 2400, 4800, 96

(Vendor limitation)

Parity* Spe ify parity None (Vendor limitation)

Data_Bits* Spe ify data bits 8 (Vendor limitation)

Stop_Bits* Spe ify stop bits 1 (Vendor limitation)

Proto ol Spe ify proto ol used Se utron

Handshaking*

Spe ify hardware handshaking None

Example

// Server Side Conne tions

Conne tions

Port, Proto ol, Baud, Parity, Handshaking

P1, Se utron, 9600, None, None

5.3. Server Side Node Descriptors

Section Title

Nodes

Column

Title Function Legal Values

Node_Name Provide name for Node Up to 32 alphanumeri

hara ters

Node_ID Generi Node ID unique to port. Also used as panel

number. 0-9

Proto ol Spe ify proto ol used Se utron

Port Port to whi h node belongs P1-P8

Example

// Server Side Nodes

Nodes

Node_Name, Node_ID, Proto ol, Conne tion

Node_1, 1, Se utron, P1

Not all ports shown are ne essarily supported by the hardware. Consult the appropriate Instru tion

manual for details of the ports available on spe ifi hardware.

Autres manuels pour FS-8700-72

Table des matières

Autres manuels FieldServer Matériel réseau

FieldServer

FieldServer Modbus Plus FS-8700-02 Note de version

FieldServer

FieldServer Telnet FS-8704-11 Note de version

FieldServer

FieldServer Honeywell Zellweger IR-148 FS-8700-102 Note de version

FieldServer

FieldServer Metasys N2 FS-8700-19 Note de version

FieldServer

FieldServer FS-8700-22 X30 Note de version

FieldServer

FieldServer Gamewell FCI E3 Series Note de version

FieldServer

FieldServer LonWorks FS-8700-21 Note de version

FieldServer

FieldServer Carrier DataPort FS-8700-86 Note de version

FieldServer

FieldServer Weigh-Tronix FS-8700-36 Note de version

FieldServer

FieldServer Hanning FS-8700-127 Note de version

FieldServer

FieldServer FS-8700-74 Note de version

FieldServer

FieldServer FS-8700-114 X30 Note de version

FieldServer

FieldServer FS-8704-09 SNMP Note de version

FieldServer

FieldServer Omron FINS FS-8704-16 Note de version

FieldServer

FieldServer Gamewell FCI 7100 Series Note de version

FieldServer

FieldServer Profibus DP FS-8700-20 Note de version

FieldServer

FieldServer Envirotronics SystemsPlus FS-8700-88 Note de version

FieldServer

FieldServer Hanning FS-8700-127 Note de version

FieldServer

FieldServer ProtoCessor ProtoNode FPC-N34 Guide de l'utilisateur

FieldServer

FieldServer A Sierra Monitor Company FS-8700-122 Note de version

FieldServer

FieldServer FS-8704-06 Manuel utilisateur

FieldServer

FieldServer Gamewell FS-8700-83 Note de version

FieldServer

FieldServer Optomux FS-8700-17 Note de version

FieldServer

FieldServer Genisys FS-8700-133 Note de version

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur