Festo CPX Manuel utilisateur

Electronics

manual

CPX I/O modules

Pneumatic interfaces

types

– CPX-GP-03-4.0

– CPX-GP-CPA-...

I/O modules types

–CPX-8DE

–CPX-4DE

–CPX-4DA

– CPX-8DE-8DA

Sub-bases type

– CPX-AB-...

CPX terminal

Manual

526 440

en 0112NH

[653 602]

Contents and general instructions

Festo P.BE-CPX-EA-EN en 0112NH

Author P. Mauch...................................

Editors H.-J. Drung, M. Holder........................

Original de.......................................

Translation transline Deutschland.....................

Layout Festo AG & Co., Dept. KG-GD...................

Type setting KI-DT..................................

Edition en 0112NH.................................

Designation P.BE-CPX-EA-EN.........................

Order no. 526 440.................................

E(Festo AG & Co., D-73726 Esslingen, Federal Republic of

Germany, 2001)

Internet: http://www.festo.com

e-mail: service_international@festo.com

The copying, distribution and utilization of this document as

well as the communication of its contents to others without

expressed authorization is prohibited. Offenders will be held

liable for the payment of damages. All rights are reserved,

in particular the right to carry out patent, utility model or

ornamental design registration.

Contents and general instructions

II Festo P.BE-CPX-EA-EN en 0112NH

CAGE CLAMP® is a registered trade mark of WAGO Kontakttechnik GmbH,

32385 Minden, Germany

TORX® is a registered trade mark of CAMCAR TEXTRON INC., Rock-

ford,Ill.,USA

HARAX® is a registered trade mark of HARTING Deutschland GmbH,

32381 Minden, Germany

Contents and general instructions

III

Festo P.BE-CPX-EA-EN en 0112NH

Contents

Designated use VII........................................................

Target group VIII..........................................................

Service VIII...............................................................

Important user instructions IX..............................................

CPX pneumatic interfaces XI................................................

CPX I/O modules XII.......................................................

Diagnosis via the field bus XIII...............................................

Structure of a CPX terminal XIV..............................................

1. Pneumatic interfaces 1-1...........................................

1.1 Function of the pneumatic interfaces 1-4...............................

1.1.1 Display and connecting elements 1-5...........................

1.2 Fitting 1-6........................................................

1.3 Settings for configuring the pneumatics 1-7.............................

1.4 Installation 1-12....................................................

1.5 Instructions on commissioning 1-13....................................

1.6 Diagnosis 1-15.....................................................

1.6.1 Error messages of the pneumatic interfaces 1-15..................

1.6.2 LED display 1-16............................................

1.6.3 Error treatment and parametrizing 1-18..........................

2. Overview and connenction technology I/O modules 2-1..................

2.1 Components of an I/O module 2-4....................................

2.2 Connection technology 2-5..........................................

2.2.1 Display and connecting elements 2-7...........................

2.2.2 Combinations of I/O modules and sub-bases 2-8.................

2.2.3 Connecting the cables and plugs to the sub-bases 2-9.............

2.3 Fitting 2-16........................................................

2.3.1 Fitting the sub-bases 2-17.....................................

Contents and general instructions

IV Festo P.BE-CPX-EA-EN en 0112NH

3. Input modules 3-1.................................................

3.1 Function of the input modules 3-4.....................................

3.2 Fitting 3-4........................................................

3.3 Installation 3-5....................................................

3.3.1 Input module CPX-8DE 3-6...................................

3.3.2 Input module CPX-4DE 3-11...................................

3.4 Instructions on commissioning 3-16....................................

3.5 Diagnosis 3-18.....................................................

3.5.1 Function of the input modules 3-18.............................

3.5.2 LED display 3-19............................................

3.5.3 Error treatment and parametrizing 3-21..........................

4. Output modules 4-1................................................

4.1 Function of the output modules 4-4...................................

4.2 Fitting 4-4........................................................

4.3 Installation 4-5....................................................

4.3.1 Output module CPX-4DA 4-6..................................

4.4 Instructions on commissioning 4-11....................................

4.5 Diagnosis 4-13.....................................................

4.5.1 Function of the output modules 4-14............................

4.5.2 LED display 4-15............................................

4.5.3 Error treatment and parametrizing 4-17..........................

5. Multi I/O modules 5-1..............................................

5.1 Function of the multi I/O modules 5-4.................................

5.2 Fitting 5-4........................................................

5.3 Installation 5-5....................................................

5.3.1 Multi I/O module CPX-8DE-8DA 5-6............................

5.4 Instructions on commissioning 5-10....................................

5.5 Diagnosis 5-12.....................................................

5.5.1 Error messages of the multi I/O modules 5-12....................

5.5.2 LED display 5-14............................................

5.5.3 Error treatment and parametrizing 5-16..........................

Contents and general instructions

Festo P.BE-CPX-EA-EN en 0112NH

A. Technical appendix A-1.............................................

A.1 Technical specifications of the pneumatic interfaces A-3...................

A.2 Technical specifications of the input modules A-4........................

A.3 Technical specifications of the output modules A-5.......................

A.4 Technical specifications of the multi I/O modules A-6.....................

A.5 Technical specifications of the sub-bases A-8............................

A.6 Internal structure of the CPX modules A-10..............................

A.7 Circuitry examples A-13..............................................

A.7.1 Circuitry examples of PNP inputs A-13...........................

A.7.2 Circuitry examples of PNP outputs A-13..........................

A.7.3 Circuitry example with DUO cable A-14..........................

A.8 Accessories A-15....................................................

B. Index B-1.........................................................

Contents and general instructions

VI Festo P.BE-CPX-EA-EN en 0112NH

Designated use

The CPX pneumatic interfaces and CPX I/O modules de-

scribed in this manual have been designed exclusively for use

in conjunction with CPX terminals from Festo. The pneumatic

interfaces and I/O modules are only to be used as follows:

– in accordance with designated use

– in faultless technical condition

– without any modifications by the user.

If additional commercially-available components such as sen-

sors and actuators are connected, the specified limits for

pressures, temperatures, electrical data, torques, etc. must

not be exceeded.

Please observe the standards specified in the relevant

chapters and comply with technical regulations, as well as

with national and local regulations.

Caution

Use only power units which guarantee reliable isolation of

the operating voltages as per IEC 742/EN 60742/VDE 0551

with at least 4 kV isolation resistance (Protected Extra Low

Voltage PELV). Switch power packs are permitted, provid-

ing they guarantee reliable isolation in accordance with

EN 60950/VDE 0805.

Please note

By the use of PELV power units, protection against electric

shock (protection against direct and indirect contact) is guar-

anteed in accordance with EN 60204-1/IEC 204. Safety trans-

formers with the adjacent symbol must be used for supplying

PELV networks. The valve terminals must be earthed to en-

sure that they function correctly (e.g. EMC).

Contents and general instructions

VII

Festo P.BE-CPX-EA-EN en 0112NH

Target group

This manual is intended exclusively for technicians trained in

control and automation technology, who have experience in

installing, commissioning, programming and diagnosing pro-

grammable logic controllers (PLC) and field bus systems.

Service

Please consult your local Festo repair service if you have any

technical problems.

Contents and general instructions

VIII Festo P.BE-CPX-EA-EN en 0112NH

Autres manuels pour CPX

Table des matières

Autres manuels Festo Terminal tactile

Festo

Festo CPV GE ASI-4 Series Manuel de la liste des pièces

Festo

Festo CPX Guide de l'utilisateur

Festo

Festo VTSA-F-CB Manuel utilisateur

Festo

Festo VTSA-ASI 4E4A-Z Series Manuel de la liste des pièces

Festo

Festo CPV-SC Series Manuel utilisateur

Festo

Festo CPV GE-ASI-8E6A-Z Series Manuel de la liste des pièces

Festo

Festo CPV Series Manuel de la liste des pièces

Festo

Festo VTSA ASI-8E8A-Z Series Manuel de la liste des pièces

Festo

Festo VTEM Manuel utilisateur

Festo

Festo CPX-FB13 Manuel utilisateur

Festo

Festo CPV-GE-DN3-8 Series Manuel utilisateur

Festo

Festo CPV GE-IL Series Instructions d'utilisation et d'installation

Festo

Festo CPX Series Manuel utilisateur

Festo

Festo FB13 Manuel utilisateur

Festo

Festo CPX-FB36 Manuel utilisateur

Festo

Festo MPA-S Manuel utilisateur

Festo

Festo VIFB6-03 Series Manuel de la liste des pièces

Festo

Festo CPV-ASI-8E8A-ZCE Series Manuel de la liste des pièces

Festo

Festo CPX Series Manuel utilisateur

Festo

Festo MPA-S Manuel utilisateur

Festo

Festo CDVI Series Manuel utilisateur

Festo

Festo MPA-C Series Manuel utilisateur

Festo

Festo CPX Series Manuel utilisateur

Festo

Festo CPV...-GE-CO3-8 series Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur