Fein KBM 32Q Manuel utilisateur
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
Contents
1. Technical data
2. Maintenance
3. General inspection
4. Disassembly
5. Assembly
6. Tools
7. Lubricants
8. Modifications
Spare design and parts list available on the Internet (www.fein.com)
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
Order reference 7 270 27
Model KBM 32 Q
Power consumption Watt 700
Power output Watt 650
Speed at full load 1/min 440
Type of current 1 ~
Safety class 1
Cable length with plug m 4
Weight kg 10
Drill - Ø Steel max.
Core drill mm 12-32
Twist drill (with drill chuck) mm 13
Tapping drill M 12
Chuck QuickIN
Magnetic holding force N 9000
Height (drill jigs) mm 373
Cam (adjustable) mm 135-260
Magnetic foot measurement mm 160 x 80 x 45
1. Technical data
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
2. Maintenance
Check power cable for damage
Vent motor using dry compressed air
Check carbon brushes
General functional control
Carbon brush replacement:
The drill motor has carbon brushes with automatic switch-off.
The replacement should be done by an electrician, prior in
an authorised FEIN - workshop.
During the insertion of the new carbon brush observe free movement in the carbon brush holder.
New carbon brushes have to run in for 15 min in no load speed.
Only use original Fein - carbon brushes and Fein - replacement parts
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
3. General inspection
3.1. General functional test
3.2. Test data
3.3. Testing devices and aids
3.4. Connection plan
3.5. Security inspection after completed repair
For a detailed troubleshooting and inspection possibilities
see Excel - file at the end of the presentation !
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
3.1 General functional test
Self-start lock and magnetic foot:
Switch on the main switch (magnet) and motor switch, then connect the machine to the main power
- The motor may not start
- Magnetic foot attaches
- Check power input (0.30 A)
Switch off motor switch
- Magnetic foot remains on
- Power input has to sink to half the amount (0.15A)
Motor test:
Turn on and load motor
- Measure idle speed
- Speed is adjusted when loaded
- at approx. 1100 Watt strong speed reduction
Overload cut-out:
Heavily load or block motor
- after 10 - 16 sec. automatic cut-out ( overload protection )
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
3.2. Test data
Nominal voltage 220 - 240 V 110 V / 120 V
Test voltage / 2 % Nominal voltage
No-load current / 10 % (1,44-1,76A) 1,6 A 3 A
No-load speed / 10% (486 - 594 U/min) 540 U/min
Main switch on
Voltage at X7,X8 10% (90-110V/DC) 100 V / DC 50 V / DC
Current consumption 0,15 A 0,25 A
Main switch on, motor on
Voltage at X7,X8 10% (180-220V/DC) 200 V / DC 100 V / DC
Current consumption 0,30 A 0,60 A
Resistance of magnetic base 5% bei 25°C (627-693 Ohm) 660 Ohm 160 Ohm
Minimum drilling force min. 2700 N
Test voltage on motor without electronics 180 V / AC 86 V / AC
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
3.3. Testing devices and aids
Multimetre for effective measuring (voltage, current, resistance)
Speed gauge
Force measurement tin for measurement of pressing force up to approx. 5000 N
Smoothed steel plate ( ST 37 - approx. 500x250x25 mm )
Adjustable isolating transformer (inspection motor without electronics with 145 V)
Sahre/MVK 03/07
All rights reserved by FEIN, in particular as these apply to trademarks. FEIN
retains all powers of disposition such as copying and right of transfer.
FRT: KBM 32 Q
3.5. Security inspection after completed repair
(directly after approx. 15 min. of breaking in)
Attention!
Basis for
the security
inspection are the
specifications of the
current
DIN VDE 0701 Part 1
(Appendix "E" for
electr. tools).
Test steps
Test type
1.
Pressing off force
1. Place KBM on smoothed steel plate (St 37).
2. Attach mains power cable to mains socket
3. Motor switch on, only then main switch on
4. Pressing off force, min 4500N (new) or min 4050N (used), measure
with force measurement tin
2.
Self-start lock
1. Connect KBM 50Q to 230 V/50 Hz
2. Main switch and then motor switch "on"
3. If machine runs, then pull mains plug
4. Connect mains plug into the mains socket again
= Machine must not start again
3.
protective earth
conductor test
1. Activate
Measuring points: Gear head against PE on the plug
Open circuit voltage on the measuring device: 4 V - 24 V, AC or DC
Measurment current: min. 0.2 A
Testing time: 3 sec
PE resistance: max. 0.3 Ohm with 4 m long mains power cable
4.
Insulation
resistance
measurement
1. Activate
2. Connect L1 and N to plug
3. Main switch and motor switch "ON"
Measuring points: Gear head and screws (270) against L1/N
Testing time: 3 sec
Testing voltage: 500 V DC
Insulation resistance: min 2.0 M Ohm
5.
High voltage test
1. Activate
2. Connect L1 and N to plug
3. Main switch and motor switch "ON"
Measuring points: Gear head and screws (270) against L1/N
Testing time: 3 sec
Testing voltage: 1000 V AC
Trip circuit: 5mA > overload relay must not respond
Autres manuels pour KBM 32Q
3
Table des matières
Autres manuels Fein Percer
Fein
Fein ASCM12 Manuel utilisateur
Fein
Fein AGWP10 Manuel utilisateur
Fein
Fein KBH25-2U Series Manuel utilisateur
Fein
Fein ABS18 Q Manuel utilisateur
Fein
Fein ASge636 Manuel utilisateur
Fein
Fein KBC35 Manuel utilisateur
Fein
Fein KBB40X Manuel utilisateur
Fein
Fein KBE 35 Series Manuel utilisateur
Fein
Fein Slugger JMU 404 M Manuel utilisateur
Fein
Fein ABS 9 Manuel utilisateur
Fein
Fein ASzx 736 Manuel utilisateur
Fein
Fein DSk658-1 Manuel utilisateur
Fein
Fein ABS 14 Guide de configuration
Fein
Fein KBM 32Q Manuel utilisateur
Fein
Fein KBE30 Manuel utilisateur
Fein
Fein KBM 50 Q Manuel utilisateur
Fein
Fein ASCD 18-200 W4 Manuel utilisateur
Fein
Fein ABOP6 Manuel utilisateur
Fein
Fein DSceu638 Manuel utilisateur
Fein
Fein BOP6 Manuel utilisateur
