Fein GWP10 Guide de configuration

GWP 10

Repair instructions

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 39

GWP 10

Contents

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 2of 39

1. Models described

2. Technical data

3. Notes and requirements

4. Tools required

5. Lubricants and auxiliary substances required

6. Removal

7. Fitting

8. Connection diagram

GWP 10

1. Models described

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 3of 39

These repair instructions describe how to repair the following models:

Model Order number

GWP 10 7 209 38 .. .. .

GWP 10

2. Technical data

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 4of 39

Technical data

All the technical data can be found in the operating instructions for the model.

Test data

Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lubricants

The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

GWP 10

3. Notes and requirements

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 5of 39

Please note

These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and

electrical training.

Only use original FEIN spare parts.

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in

serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when

commissioning.

The German Equipment and Product Safety Act [ProdSG] applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed.

GWP 10

4. Tools required

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 6of 39

Standard tools

Special tools

Torx T20 Assembly aid 6 41 22 121 01 0

Cross-tip screwdriver PH1, PH2 Expansion wedge, 12 mm 6 33 05 009 01 3

Slotted screwdriver (small) Drawing-off socket cap 6 41 04 150 00 8

Combination pliers Chuck cone with 16 mm diameter 6 41 07 016 00 1

Plastic hammer Chuck cone with 17 mm diameter 6 41 07 017 00 0

Arbor press Chuck cone with 19 mm diameter 6 41 07 019 00 7

Punch 5 mm; 6 mm; 9 mm

Long-nosed pliers

Slide hammer

Inner puller

Sleeve 11 mm inner diameter

26 mm outer diameter

7 mm inner diameter

30 mm outer diameter

19 mm inner diameter

30 mm outer diameter

~16 mm inner diameter

19 mm outer diameter

8 mm inner diameter

~17 mm outer diameter

GWP 10

4. Tools required

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 7of 39

Standard tools

Sleeve 8 mm inner diameter

~19 mm outer diameter

GWP 10

5. Lubricants and auxiliary substances required

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 8of 39

Lubricants

Grease 0 40 101 0100 4 25 g Housing

GWP 10

6. Removal

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 9of 39

Removing the handle half shell

1. Unscrew the countersunk screw (1).

2. Remove the switch pushbutton (2).

3. Unscrew the three screws (3).

4. Remove the handle half shell (4).

Tools:

- PH1 cross-tip

screwdriver

- PH2 cross-tip

screwdriver

GWP 10

6. Removal

C-SC_CSSM

Version 1.0

2016-02-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 10 of 39

Removing the handle half shell

1. Unscrew the screw (1).

2. Remove the cable clamping piece (2).

3. Remove the cover (3).

4. Remove the handle half shell (4).

Tools:

- PH2 cross-tip

screwdriver

Autres manuels pour GWP10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fein Percer

Fein

Fein KBE 52-2 M Guide de configuration

Fein

Fein DSk658-1 Manuel utilisateur

Fein

Fein Handy Master ABS14 Manuel utilisateur

Fein

Fein ASzxeu 636-1 Kinetik Manuel utilisateur

Fein

Fein KBC35 Manuel utilisateur

Fein

Fein Tapper ASge 636 Manuel utilisateur

Fein

Fein Handy Master ABS9 Manuel utilisateur

Fein

Fein KBM 52 U Manuel utilisateur

Fein

Fein ASCD18W2 Manuel utilisateur

Fein

Fein DDSK 672 Manuel utilisateur

Fein

Fein ASCM14 Manuel utilisateur

Fein

Fein KBU 35 MQ Manuel utilisateur

Fein

Fein DSceu638 Manuel utilisateur

Fein

Fein KBC35 Manuel utilisateur

Fein

Fein KBU 110-4 M Manuel utilisateur

Fein

Fein ASCD 18-200 W4 Manuel utilisateur

Fein

Fein KBU 35 PQ Guide de configuration

Fein

Fein KBM 32Q Manuel utilisateur

Fein

Fein Slugger JMU 137 QW Series Manuel utilisateur

Fein

Fein KBB 40 Series Manuel utilisateur

Fein

Fein KBM 32Q Manuel utilisateur

Fein

Fein ABSU12W4 Manuel utilisateur

Fein

Fein MBS 16 Manuel utilisateur

Fein

Fein ASc 636 Manuel utilisateur

Manuels Percer populaires d'autres marques

Makita

Makita BDF456 Manuel utilisateur

Black & Decker

Black & Decker LDX220 Manuel utilisateur

Hitachi

Hitachi DH 40MA Manuel utilisateur

Challenge

Challenge JO Manuel de référence technique

Makita

Makita LXFD01 Manuel utilisateur

Festool

Festool T18+3 Manuel utilisateur

Milwaukee

Milwaukee M12 FPDX-202X Manuel utilisateur

EINHELL

EINHELL TE-RH 32 E Manuel utilisateur

Makita

Makita DHP484 Manuel utilisateur

Makita

Makita FD05 Manuel utilisateur

Bosch

Bosch PSB 530 RA Manuel utilisateur

Maximum

Maximum 054-1359-4 Manuel utilisateur

Makita

Makita HP332D Manuel utilisateur

Raider

Raider RDP-HD31H Manuel utilisateur

Bort

Bort BPM-1400x2 Manuel utilisateur

Black & Decker

Black & Decker 7266 Manuel utilisateur

KENT USA

KENT USA TRD1230 Manuel utilisateur

Bosch

Bosch GSB 19-2 RE Manuel utilisateur