ExtrusionBot EB-1 Manuel utilisateur
ExtrusionBot™
User Manual
EB-1
(Patent Pending)
™
Table of Contents
1Thank You and Terms of Use
a. Terms
b. Specifications
2Unpacking & Setting Up ExtrusionBot
a. Out of the box
b. The Spool
c. The Pellet Hopper
3Operating ExtrusionBot
a. Switch Functions
b. Powering On
c. Operating the P.I.D.
4Troubleshooting and Maintenance
a. Troubleshooting
b. Maintenance
c. Contact Us
Thank You.
ExtrusionBot Terms of Use.
™
Thank You
Thank you for choosing ExtrusionBot as your personal filament extruder.
ExtrusionBot offers the fastest home based filament extrusion available today.
Contact us on the web at www.extrusionbot.com for additional support, and
information.
Terms of Use
Please be advised of the following terms (the “Terms”) regarding this User
Manual (the “Manual”):
All information in this Manual is subject to change at any time without notice
and is provided for convenience purposes only. ExtrusionBot reserves the right
to modify or revise the Manual in its sole discretion and at any time. You agree
to be bound by any modifications and/or revisions. Contact the ExtrusionBot for
up-to-date information.
The design of this Manual and all text, graphics, information, content, and other
material are protected by copyright and other laws. The contents are Copyright
(c) 2013 ExtrusionBot, LLC, or our respective affiliates and suppliers. All rights
reserved. Certain trademarks, trade names, service marks and logos (the
“Marks”) used are registered and unregistered trademarks, trade names and
service marks of ExtrusionBot, LLC and its affiliates. Nothing contained in this
Manual grants or should be construed as granting, by implication, estoppel, or
otherwise, any license or right to use any Marks without the written permission
of ExtrusionBot, LLC. Any unauthorized use of any information, materials or
Marks may violate copyright laws, trademark laws, laws of privacy and
publicity, and/or other laws and regulations.
DISCLAIMERS. Neither ExtrusionBot, LLC nor any of our affiliates warrant
the accuracy or completeness of the information, products or services provided
by or through this Manual, which are provided “as is” and without any express
or implied warranties of any kind, including warranties of merchantability,
fitness for a particular purpose, or non-infringement of intellectual property. To
the fullest extent permissible by the applicable law, we hereby disclaim all
liability for product defect or failure, claims that are due to normal wear, product
misuse, abuse, product modification, improper product selection, non-
compliance with
Any codes, or misappropriation. To the fullest extent permissible by the
applicable law, we hereby disclaim any and all responsibility, risk, liability and
damages arising out of death or personal injury resulting from assembly or
operation of our products. ExtrusionBot, LLC assumes no responsibility, nor
will be liable, for any damages to, or any viruses or malware that may infect
your computer, telecommunication equipment, or other property caused by or
arising from your downloading of any information or materials related to
ExtrusionBot products. The
Foregoing exclusions do not apply to the extent prohibited by law; please refer
to your local laws for any such prohibitions. We make no warranties to those
defined as “consumers” in the Magnuson-Moss Warranty-Federal Trade
Commission Improvements Act.
LIMITATIONS OF LIABILITY. In no event will ExtrusionBot, LLC or any
of our respective officers, directors, employees, shareholders, affiliates, agents,
successors or assigns, nor any party involved in the creation or production of our
products be liable to you or anyone else for any indirect, special, punitive,
incidental or consequential damages (including, without limitation, those
resulting from lost profits, lost data or business interruption) arising out of the
use, inability to use, or the results of use of this Manual, whether based on
warranty, contract, tort or any other legal theory and whether or not advised of
the possibility of such damages. The foregoing limitations of liability do not
apply to the extent prohibited by law; please refer to your local laws for any
such prohibitions.
CHOICE OF LAW; JURISDICTION. These Terms will be governed by and
construed in accordance with the laws of the State of Arizona, without giving
effect to any principles of conflicts of laws. Any action seeking legal or
equitable relief arising out of or relating to these Terms or the Manual will be
brought only in the courts of the State of Arizona or the United States District
Court for the District of Arizona.
Specifications
PHYSICAL DIMENSIONS
Without Spool: 23” x 8” x 9”
With Spool: 23” x 8” x 11”
Shipping Box: 24” x 10” x 10”
Weight: 11 lbs.
Shipping Weight: 12 lbs.
TEMPERATURE
Ambient Operating Temperature:
130° F
Storage Temperature:
78° F
ELECTRICAL
AC Input: 120v and 240v
Power Requirements:
120V to 220V
MECHANICAL
Chassis: Body: 10” x 8” x 4”
Motors:
24V DC Motor
Unpacking & Setting Up
ExtrusionBot.
Out of the Box
When unboxing ExtrusionBot, you will notice that we have made a few minor
adjustments in the presentation of the machine for convenience and safety in
shipping. The bot is still ready to be used, you will just need to adjust a few
things to make it operational.
As you remove ExtrusionBot from the box there will be some pieces of tape
guarding the spool motor and maintaining the rubber spool holder in place.
Also, there will be a bag attached to the machine, just above the spool motor,
with your keys to operate ExtrusionBot as well as the nozzles you ordered.
You will need to rotate the spool motor 90° counterclockwise to ensure that the
spool motor is in the correct operating position.
The rubber spool holder should be on with the metal-ringed side facing out and
should rotate toward the machine freely (spinning counterclockwise).
If you attempt to rotate it away from the machine (clockwise) there should be
some tension to prevent you from doing so; this feature helps ensure that the
spool does not unravel your filament during the extruding process.
The fan will also need to be rotated down about 45° or to your own preferred
angle.
**For best results during the extruding process please do not install the nozzle
after reading the “Operating ExtrusionBot” section of this manual. **
Out of the Box (continued)
Metal Ringed Side
Facing out.
90°
The Spool (sold separately)
When installing the spool, the side that has the ½” depression is the side that
needs to be facing away from the spool motor. With the rubber spool holder in
place the spool should hang level.
The Pellet Hopper
The stock pellet hopper that comes installed on ExtrusionBot can easily be
interchanged with the Jumbo Pellet hopper.
To remove the pellet hopper, grip the top of the pellet hopper and gently twist
clockwise and counter-clockwise while also pulling upward from the top of the
machine.
To install the pellet hopper, place the bottom of the pellet hopper over the mouth
of the pellet tube and gently but firmly push the pellet hopper onto the pellet
tube. The pellet hopper should fit snugly around the mouth of the pellet tube.
Table des matières
