Extron electronics AVTrac Demonstration Kit Manuel utilisateur

PRELIMINARY

Setup Guide for AVTrac™Demonstration Kit

68-1530-01

Rev. B 02 09

Connectivity Box (1)

Carpet Finish

Cover Track (1)

Rubber finish

Cover Track (1)

AC Conduit (1)

Side Ramps (2)

End Ramps (2)

Base Track (1)

Pre-cut

Carpet Pieces (2)

The AVTrac Demonstration Kit shows how the AVTrac system meets customers' application needs. The kit components

can be unpacked from the carrying box as shown in the ﬁgures below. To repack the kit, reverse the steps.

NThe illustrations below show the US version of the AVTrac Demonstration kit. The International and Universal

models are similar in size and packaging, but contain a single AC outlet, which may be connected to double insulated

power cable, or ﬂex conduit without wires.

NIf the box is to be reused, remember to save

the packing foam.

2. Remove top foam and foam

covering side ramps.

3. Remove side and end ramps.

4. Remove track pieces and

connectivity box with AC

conduit.

WThis kit is for demonstration

purposes only. The AC power module is not

wired to distribute power and must not be

connected to an electrical power source.

1. Remove carpet pieces.

Setup Guide for AVTrac™Demonstration Kit, cont’d

PRELIMINARY

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500

+1.714.491.1517FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794

+1.919.863.1797FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800

+971.4.2991880 FAX

Ensure that the kit contains all the items shown in the ﬁgure below and assemble the kit components by following the

steps below.

NThe illustration below shows the US version of the AVTrac Demonstration kit. The International and Universal

models are similar in size and packaging, but contain a single AC outlet, which may be connected to double insulated

power cable, or ﬂex conduit without wires.

End Ramps

Cover Track w/ Rubber (shown)

or Carpet Finish

Side Ramps

Aluminum

Base

Track

Connectivity

(AAP) Box

1. Place aluminum base track on a ﬁrm, ﬂat surface.

2. Attach the side ramps by mating the tabs in the ramps with the grooves in the track.

3. Place the end ramps in position at the end of the track pieces.

4. Place the connectivity box ﬂush with the end of the track nearest the end ramps. The AC conduit should run

from the connectivity box to the opposite end of the track.

5. Attach the cover track (either rubber or carpet ﬁnish) by snapping it onto the base track.

6. Place the pre-cut carpet pieces on top of the ramps and around the connectivity box.

www.extron.com

Autres manuels Extron electronics Matériel réseau

Extron electronics

Extron electronics AVTrac 42-122-xx Manuel utilisateur

Extron electronics

Extron electronics RGB 460xi FSR Series Manuel utilisateur

Extron electronics

Extron electronics HSA 400 Manuel utilisateur

Extron electronics

Extron electronics PoleVault System PVT RGB CV MK Manuel utilisateur

Extron electronics

Extron electronics VN-Matrix Manuel utilisateur

Extron electronics

Extron electronics Decora Style1-Gang Wallplate WP CTL D Manuel utilisateur

Extron electronics

Extron electronics MAAP Active Modules VCM 100 MAAP Manuel utilisateur

Extron electronics

Extron electronics HSA 222C Manuel utilisateur

Extron electronics

Extron electronics VCA 100 Manuel utilisateur

Extron electronics

Extron electronics HSA 400 Manuel utilisateur

Extron electronics

Extron electronics VERSATOOLS MTP Manuel utilisateur

Extron electronics

Extron electronics Ethernet Control Interface IPL T PCS4 Manuel utilisateur

Extron electronics

Extron electronics Table Mountable MAAP Bay CPM200 Manuel utilisateur

Extron electronics

Extron electronics IPL M PDP-ES Manuel utilisateur

Extron electronics

Extron electronics MediaPort 300 Manuel utilisateur

Extron electronics

Extron electronics MBC EVC Buffer P/N 26-448-01 Manuel utilisateur

Extron electronics

Extron electronics Surface Mount Boxes SMB 101 Manuel utilisateur

Extron electronics

Extron electronics DAS101CM Series Manuel utilisateur

Extron electronics

Extron electronics PVT CV D Manuel utilisateur

Extron electronics

Extron electronics 1252 MS Manuel utilisateur

Extron electronics

Extron electronics RGB 203 Rxi VTG Manuel utilisateur

Extron electronics

Extron electronics IP Link Accessory with Four Relays IPA T... Manuel utilisateur

Extron electronics

Extron electronics Architectural Interface CIA114 Manuel utilisateur

Extron electronics

Extron electronics IPL T CR48 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur