Extech Instruments MultiTec MT310 Manuel utilisateur
User’s Guide
MultiTecTM Series
Digital MultiMeters with PC Interface
Models: MT310
MT320
MT330
th
WARRANTY
EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for
three years from date of shipment (a six month limited warranty applies on sensors and cables). If it should become
necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service
Department at (781) 890-7440 ext. 210 for authorization. A Return Authorization (RA) number must be issued before
any product is returned to Extech. The sender is responsible for shipping charges, freight, insurance and proper
packaging to prevent damage in transit. This warranty does not apply to defects resulting from action of the user such as
misuse, improper wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification.
Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be
liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or replacement
of the product. The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or
implied.
REPAIR AND CALIBRATION SERVICES
Extech offers complete repair and calibration services for all of the products we sell.
For periodic calibration, NIST certification or repair of any Extech product, call customer
service for details on services available. Extech recommends that calibration be performed
on an annual basis to insure calibration integrity.
Copyright © 1999 Extech Instruments Corporation. All rights reserved including the
right of reproduction in whole or in part in any form. Version 1.2 4/00
Introduction
Congratulations on your purchase of Extech model MT310, MT320, or MT330 digital multimeter. Properly used, this meter
will provide many years of reliable service. All models measures AC/DC Voltage/Current, Resistance, Frequency and
Capacitance. All models are Autoranging and include a PC Interface feature. The MT320 and MT330 also measure
temperature. The Model MT330 is True RMS responding.
Safety
International Safety Symbols
Refer to the manual Hazardous voltages Double insulation
for further information may be present.
UL Listed
The UL mark does not indicate that this product has been evaluated for the accuracy of its readings.
Safety Precautions
1. Improper use of this meter can cause damage, shock, injury or death. Read and understand this user manual
before operating the meter.
2. Make sure any covers or battery doors are properly closed and secured.
3. Always remove the test leads before replacing the battery or fuses.
4. Inspect the condition of the test leads and the meter itself for any damage before operating the meter. Repair any
damage before use.
5. Do not exceed the maximum rated input limits.
6. Use great care when making measurements if the voltages are greater than 25VAC rms or 35VDC. These
voltages are considered a shock hazard.
7. Always discharge capacitors and remove power from the device under test before performing Capacitance, Diode,
Resistance or Continuity tests.
8. Remove the battery from the meter if the meter is to be stored for long periods.
9. To avoid electric shock, do not measure AC current on any circuit whose voltage exceeds 250V AC.
10. Voltage checks on electrical outlets can be difficult and misleading because of the uncertainty of connection to the
electrical contacts. Other means should be used to ensure that the terminals are not "live".
Specifications
Function Ranges Accuracy
400.0mV ±(0.3% reading + 5 digits)
4.000V, 40.00V, 400.0V, ±(0.1% reading + 5 digits)MT330
±(0.3% reading + 5 digits)MT320
±(0.5% reading + 5 digits)MT310
DC Voltage
(V DC)
1000V ±(0.5% reading + 5 digits)
100.0-400.0mV ±(1.5% reading + 5 digits)
4.000V,40.00V, 400.0V ±(1.0% reading + 5 digits) (40Hz to 1kHz)
AC Voltage
(V AC)
(Model MT330
True RMS) 700.0V ±(1.5% reading + 5 digits)
400.0µA, 4000µA, 40.00mA, 400.0mA ±(1.2% reading + 10 digits)
DC Current
(A DC) 20.00A ±(2% reading + 10 digits)
400.0µA, 4000µA, 40.00mA, 400.0mA ±(1.5% reading +10 digits) (40Hz to 1kHz)
AC Current
(A AC)
(Model MT330
True RMS)
20.00A ±(2% reading + 10 digits)
Function Ranges Accuracy
400.0Ω, 4.000kΩ, 40.00kΩ, 400.0kΩ, 4000kΩ±(0.5% reading + 10 digits)
Resistance
40.00MΩ±(1% reading + 5 digits)
500.0mHz Not specifiedFrequency
5.000Hz, 50.00Hz, 500.0Hz, 5.000kHz, 50.00kHz,
500.0kHz, 5.000MHz, 10.00MHz
±(0.1% reading + 2 digits)
(250mVac peak minimum)
Capacitance 40.00nF, 400.0nF, 4.000uF, 40.00uF, 100.0uF ±(2% reading + 10 digits)
0.0-212.0°F ±(3°+ 5 digits)
212.0 – 400.0°F
Temp °F
(MT320 and
MT330 only) 400.0 - 2000°F
±(3% reading + 5 digits)
-20.0 – 100.0°C ±(3°+ 5 digits)
100.0 – 400.0°C
Temp °C
(MT320 and
MT330 only) 400.0 - 1370°C
±(3% reading + 5 digits)
Input Limit Specifications
Function Maximum Input
V DC or V AC 1000V DC or AC Peak, < 10 seconds
mA DC/AC 400mA DC/AC, fused 250V, 0.5A
A DC/AC 20A DC/AC, < 30 seconds (every 15min); Fused 250V, 20A
Frequency 250V DC or AC peak
Resistance 250V DC or AC peak, <10 seconds
Duty Cycle 250V DC or AC peak
General Specifications
Duty Cycle 0.1% to 99.9%
Diode Test Test voltage of 1.5V (max)
Continuity Check Audible tone if the resistance is less than 60Ω
Input Impedance 10MΩ(VDC and VAC), 100MΩin the 400mV range
Display 4000 count (3 ¾ digit) LCD, Model MT330 with back lighting
Overrange indication LCD displays "OL"
Polarity Auto positive polarity; Minus (-) sign for negative polarity
Low Battery Indication Battery symbol indicates low battery condition.
Power Supply One 9V battery (NEDA 1604)
Fuses µA, mA ranges: 500mA/250V ceramic; 20A range: 20A/250V ceramic
Operating Temperature 32oF to 104oF (0oC to 40oC)
Storage Temperature -4oF to 140oF (-20oC to 60oC)
Accuracy Temperature 64oF to 82oF (18oC to 28oC)
Relative Humidity < 80% RH operating, (<70% RH storage)
Dimensions / Weight 3.5x7x1.3" (88x178x33mm) / 0.7lb (315g)
Description
Meter (MT330 pictured)
1. 3 3/4 Digit (4000 count) Liquid Crystal Display (LCD).
2. Function keys
3. Rotary function switch
4. 20A, mA/µA, COM, V/Hz/Ω/Capacitance input jacks.
5. Temperature probe input socket (MT320 and MT330 only).
6. RS232 PC interface connector
Display
1. AutoRange mode
2. DC current or voltage
3. Negative (minus) sign
4. AC current or voltage
5. Input jack status icons
6. 20A blown fuse indicator
7. uA/mA blown fuse indicator
8. Incorrect test lead insertion indicator (active
in Capacitance, Hz, Ohms, Diode,
Continuity and ACV/DCV modes)
9. Power warning for Ohm, Cap and Diode
10. Continuity symbol
11. Diode symbol
12. Low Battery symbol
13. Relative mode indicator
14. Range hold indicator
15. PC interface indicator
Operation
Measurement Preparations and Considerations
1. ALWAYS push the power key to the OFF position when the meter is not in use. This meter has Auto Power OFF
that automatically shuts the meter OFF if 30 minutes elapse without activity. To recover from Auto OFF, press any
key. (Alternately, press the POWER key, wait three seconds, and press the POWER key again).
2. If "OL" appears on the display during a measurement, the measurement exceeds the range selected. Change to a
higher range.
AC or DC Voltage Measurements
1. Set the function switch to the "V" position
2. Press the "DC/AC" key until "DC or AC" appears on the LCD.
3. Insert the black test lead into the negative COM jack and the red test lead into the positive Vjack.
4. Touch the test probe tips to the circuit under test.
5. Read the voltage on the display
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Extech Instruments Multimètre
Extech Instruments
Extech Instruments 450 Manuel utilisateur
Extech Instruments
Extech Instruments EX505-K Manuel utilisateur
Extech Instruments
Extech Instruments 38394 Manuel utilisateur
Extech Instruments
Extech Instruments 407119A Manuel utilisateur
Extech Instruments
Extech Instruments RC200 Manuel utilisateur
Extech Instruments
Extech Instruments SDL900 Manuel utilisateur
Extech Instruments
Extech Instruments 380942 Manuel utilisateur
Extech Instruments
Extech Instruments RHT50 Manuel utilisateur
Extech Instruments
Extech Instruments 381676 Manuel utilisateur
Extech Instruments
Extech Instruments MN30 Manuel utilisateur
Extech Instruments
Extech Instruments EX410 Manuel utilisateur
Extech Instruments
Extech Instruments EX350 Manuel utilisateur
Extech Instruments
Extech Instruments EX205T Manuel utilisateur
Extech Instruments
Extech Instruments BT100 Manuel utilisateur
Extech Instruments
Extech Instruments 38073 Manuel utilisateur
Extech Instruments
Extech Instruments 411 Manuel utilisateur
Extech Instruments
Extech Instruments 382100 Manuel utilisateur
Extech Instruments
Extech Instruments EX360 Manuel utilisateur
Extech Instruments
Extech Instruments EX210 Manuel utilisateur
Extech Instruments
Extech Instruments EX430A Manuel utilisateur
Manuels Multimètre populaires d'autres marques
Gossen MetraWatt
Gossen MetraWatt METRAmax 6 Manuel utilisateur
PeakTech
PeakTech 4000 Manuel d'utilisation et d'entretien
YOKOGAWA
YOKOGAWA 90050B Manuel utilisateur
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 Manuel utilisateur
Fluke
Fluke 8846A Manuel d'utilisation et d'entretien
Tempo Communications
Tempo Communications MM200 Manuel utilisateur
