Extech Instruments HD450 Manuel utilisateur

Table des matières

Autres manuels Extech Instruments Instrument de mesure

Extech Instruments

Extech Instruments HD755 Manuel utilisateur

Extech Instruments

Extech Instruments 45320 Manuel utilisateur

Extech Instruments

Extech Instruments CO40 Manuel utilisateur

Extech Instruments

Extech Instruments SP505 Manuel utilisateur

Extech Instruments

Extech Instruments RPM33 Manuel utilisateur

Extech Instruments

Extech Instruments SL130 Manuel utilisateur

Extech Instruments

Extech Instruments 250W Series Manuel utilisateur

Extech Instruments

Extech Instruments HD450-NIST Manuel utilisateur

Extech Instruments

Extech Instruments HD700 Manuel utilisateur

Extech Instruments

Extech Instruments GRT300 Manuel utilisateur

Extech Instruments

Extech Instruments EX845 Manuel utilisateur

Extech Instruments

Extech Instruments SL510 Manuel utilisateur

Extech Instruments

Extech Instruments AM600 Manuel utilisateur

Extech Instruments

Extech Instruments 401027 Manuel utilisateur

Extech Instruments

Extech Instruments MA640 Manuel utilisateur

Extech Instruments

Extech Instruments 407113 Manuel utilisateur

Extech Instruments

Extech Instruments 461891 Manuel utilisateur

Extech Instruments

Extech Instruments VB400 Manuel utilisateur

Extech Instruments

Extech Instruments MA61 Manuel utilisateur

Extech Instruments

Extech Instruments RH305 Manuel utilisateur

Extech Instruments

Extech Instruments 341350A Manuel utilisateur

Extech Instruments

Extech Instruments MA250 Manuel utilisateur

Extech Instruments

Extech Instruments UV510 Manuel utilisateur

Extech Instruments

Extech Instruments MA160 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur



BUILT building science lab to advance teaching 1914 SW Park Ave Room 201 PSU School of Architecture Portland, OR 97207



QUICK SHEET

EXTECH HD450 datalogging light meter

LOCATION of EQUIPMENT:

Hardware: See lab attendant

Software: Light Meter

INSTRUCTIONS FOR USE:

1. Press the power button to turn the device on and off. If nothing happens you may need to replace

the battery.

2. Plug the sensor into the top of the device.

3. Press the UNITS button to toggle between LUX and footcandles.

4. Remove the cap on the sensor and press the RANGE APO button to select one of four ranges;

40, 400, 4k, 40k. You will want to adjust you range if the screen says “OL.”

5. Place the sensor on a horizontal surface so that the white dome is facing up at the light source.

6. To freeze the LCD display, momentarily press the HOLD button. 'MANU HOLD' will appear on the

LCD. Momentarily press the HOLD button again to return to normal operation

7. The Peak Hold function allows the meter to capture short duration light flashes. The meter can

capture peaks down to 10mS in duration.

8. The MAX-MIN function allows the meter to store the highest (MAX) and lowest (MIN) readings.

9. The Relative Mode function allows the user to store a reference value in the meter. All displayed

readings will be relative to the stored reading.

10. When done recording/logging, unplug the sensor from the handheld unit

To Set up Data Logging:

In this mode, the ▲ and ▼ arrow buttons will allow adjustment of the selected (flashing) digits.

The ◄ and ► buttons will scroll to the next or previous selection.

1. Power the meter, then press and the REC/SETUP and UNITS buttons simultaneously to

enter the Setup mode. The hours display will flash.

2. Adjust and step through each selection as needed.

3. Press and hold the REC/SETUP and UNITS buttons simultaneously to exit the Setup

mode. The order of selection with the flashing (icon) is:

Hour (0 to 23) 12:13:14 (Time)

Minute (0 to 59) 12:13:14 (Time)

Second (1 to 59) 12:13:14 (Time)

Sample Rate (00 to 99 seconds) 02 (Sampling)

Month (1 to 12) 1 03 10 (Day)

Day (1 to 31) 1 03 10 (Day)

Day of the week (1 to 7) 1 03 10 (Day) (Sunday = 1)

Year (00 to 99) 2013 (Year)

OVERVIEW:

The HD450 measures illuminance in Lux and Foot candles (Fc). The HD450 is a Datalogger and includes

a PC interface and Windows compatible software for downloading data. Up to 16,000 readings can be



BUILT building science lab to advance teaching 1914 SW Park Ave Room 201 PSU School of Architecture Portland, OR 97207



QUICK SHEET

stored on the meter for download to a pc and 99 readings can be stored and viewed directly on the

meter’s LCD display.

SUGGESTED APPLICATIONS:

● Comparing how much light is needed for a task against actual light to determine light waste

● Using a meter to control shading devices

RELEVANT TOPICS:

Post-Occupancy Studies, Daylighting Studies, Lighting, Electric Lighting,