8WT.050.580.001.DE.IM.0714
General safety instructions Sensor measuring modules for MFC
2.2 General safety instructions
Evoqua Water Technologies GmbH places great emphasis on
safety when work is performed using the sensor measuring
modules and retrofit kits. Safety is our guiding principle right from
the design phase; the system is therefore equipped with safety
features.
Safety instructions The safety instructions in this documentation must be observed
unconditionally at all times. Additional industry-wide or in-house
safety regulations also continue to apply.
State-of-the-art technology The sensor measuring modules and retrofit kits were constructed
in accordance with the state of the art and all recognized technical
regulations relevant to safety. However, if the unit is used by
untrained personnel, potentially fatal hazards may occur for the
user or third parties during use of the unit, and damage to the
sensor measuring modules, retrofit kits and other equipment may
also result.
Worknotspecifically describedin this instructionmanualmayonly
be performed by authorized personnel.
Personnel The operator running the systemmust ensure that only authorized
and qualified specialists work with and on the system and only
within their assigned areas of responsibility. "Authorized
specialists" refers to trained technicians of the operator, Evoqua
Water Technologies GmbH and, if applicable, the service partner.
Only qualified electricians may perform work on electrical
components.
Spare parts / components Correct operation of the sensor measuring modules and retrofit
kits is only guaranteed if original spare parts and components are
used in the combinationdescribed in this Operating Manual. If this
stipulation is not observed, there is the risk of malfunction or
damage to the sensor measuring modules and retrofit kits
Extensions and conversions The system must not, without the express, prior, written consent of
the manufacturer, be modified, extended, or converted in any way
that might adversely affect its safety.
Electrical power During normal operation, the MFC must remain closed.
Switch off the complete system and secure against reactivation
prior to installation, inspection, maintenance and repair work.
Connect cables in accordance with the terminal diagrams.
For more information, including the general safety instructions,
please review the instruction manual „MFC”.
