EverFocus Value IP EZN1240-SG Manuel utilisateur

Value IP Series Network Camera

EZN1240-SG, EZN1540-SG & EZN2540-SG, H265, IR, WDR

Quick Installation Guide

EZN1240-SG / EZN1540-SG / EZN2540-SG

Release Date: June, 2021

All the images including product pictures or screen shots in this document are for example only.

The images may vary depending on the product and software version. Information contained in

this document is subject to change without notice.

EverFocus Taiwan:

2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan

TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw

1. Physical Description

EZN1240-SG / EZN1540-SG / EZN2540-SG

No.

Item Name

Descriptions

1Reset Button

/ Micro SD Card Slot

Use the supplied Hexagon Wrench to loosen the

screws to access the Reset Button and Micro SD

slot.

2 Sunshield Protect the camera from the direct fun rays.

3 Tilt Screw

Use the supplied Hexagon Wrench to loosen the

Tilt Screws.

4 Pan Screw

Use the supplied Hexagon Wrench to loosen the

Pan Screws.

Dimensions

EZN1240-SG / EZN1540-SG / EZN2540-SG

Packing List

Please check that there is no missing items in the package before installing.

EZN Series

1. Camera x 1

2. MAC Address Sticker x 2

3. Cable Gland Kit x 1

4. Screw x 3

5. Screw Anchor x 3

6. Hexagon Wrench x 2

7. Quick Installation Guide x 1

8. Installation Sticker x 1

Note:

1. Equipment configurations and supplied accessories vary by country. Please

consult your local EverFocus office or agents for more information. Please

also keep the shipping carton for possible future use.

2. Contact the shipper if any items appear to have been damaged in the

shipping process.

Optional Accessory

You can go to the product page on EverFocus’ website to check the related

optional accessories. www.everfocus.com.tw

2. Cables

The cables provide connections for network and power.

LAN / PoE Cable

Power Cable (12VDC)

Reset Button

The Reset Button can be used to restore the camera to factory default. When

the camera is powered up, press the Reset Button about 10 seconds to reboot

the camera.

3. Installation

3.1 EZN Series

1. Drill three holes on the surface according to the screw positions on the

Camera Base. Push the supplied 3 Screw Anchors into the holes. Drill another

hole in the middle within the 3 screw holes if you wish to run the wires into

the surface. Screw the camera to surface using the supplied 3 Screws.

Mounting Screws

Screw Anchors

2. Adjust the pan/tilt/rotate angles of the camera by loosen the Pan/Tilt/Rotate

screws using the supplied Hexagon Wrench.

Tilt Screw

Pan Screw

3. Connect the camera to power. You can either connect the camera to a 12VDC

power source or to a PoE switch using the PoE cable.

4. Connect the camera to the network using the supplied Cable Gland Kit.

a. Insert a RJ-45 network cable (without the RJ-45 connector on the one end)

through the supplied Waterproof Ring, Cable Gland, Stopper and Screw

Cap accordingly.

Waterproof Ring Cable Gland Stopper Screw Cap

b. Connect the RJ-45 cable to the LAN/PoE Cable of the camera.

RJ-45 Cable

LAN/PoE Cable

c. Tightly screw the Cable Gland and Screw Cap to the Rugged RJ-45

Connector Cable.

Screw Cap

Cable Gland

d. Crimp the RJ-45 connector onto the RJ-45 network cable. Note that the

wires should be placed into the RJ-45 connector based on the following

order (from left to right).

Orange with white stripe

Orange

Green with white stripe

Blue

Blue with white stripe

Green

Brown with white stripe

Brown

5. Optionally insert a Micro SD card into the card slot (please refer to No.1 in 1.

Physical Description).

6. Now you can access the camera live view. See 4. Accessing the Camera.

4. Accessing the Camera

You can look up the IP address of the IP camera using the IP Utility (IPU)

program from EverFocus website (key word search: "IP Utility").

The default network is DHCP. However, if there is no dynamic IP address

assigned to the device, its IP will switch to 192.168.0.10. By default, the ID is

admin and there is no password. Please input a password for the first-time login.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EverFocus Caméra de sécurité

EverFocus

EverFocus Eq250 Manuel utilisateur

EverFocus

EverFocus EHH5200 Manuel utilisateur

EverFocus

EverFocus 288 Series Manuel utilisateur

EverFocus

EverFocus Speed Dome EPTZ500 Manuel utilisateur

EverFocus

EverFocus EDH5240 Manuel utilisateur

EverFocus

EverFocus ED335 Manuel technique

EverFocus

EverFocus EAN7360 Manuel utilisateur

EverFocus

EverFocus EQH5102 Manuel utilisateur

EverFocus

EverFocus NeVio EAN900 Manuel utilisateur

EverFocus

EverFocus EZN3160 Manuel utilisateur

EverFocus

EverFocus Polestar EZN7221 Manuel utilisateur

EverFocus

EverFocus EHH5200 Manuel utilisateur

EverFocus

EverFocus EQ350HQ Manuel utilisateur

EverFocus

EverFocus M107-N501-001 Manuel utilisateur

EverFocus

EverFocus ED640 Manuel du propriétaire

EverFocus

EverFocus EQ700 Manuel utilisateur

EverFocus

EverFocus EHD935 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus EZ-PLATECAM-002 Manuel utilisateur

EverFocus

EverFocus EDH5201 Manuel utilisateur

EverFocus

EverFocus EMD935F Manuel utilisateur

EverFocus

EverFocus EM-500NHP1 Manuel utilisateur

EverFocus

EverFocus EIP220 Manuel utilisateur

EverFocus

EverFocus eZ.HD Series Manuel utilisateur

EverFocus

EverFocus NeVio EAN800A Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur