EverFocus EZ.HD Series Manuel utilisateur

EBA1280 eZ.HD Series

1080p FHD IP66 IR Dome Camera

User’s Manual

Release Date: May, 2019

All the images including product pictures or screen shots in this document are for example

only. The images may vary depending on the product and software version. Information

contained in this document is subject to change without notice.

EverFocus Taiwan:

2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan

TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw

1. Introduction

EverFocus eZ.HD series cameras – EBA1280 deliver 1080p full HD image quality.

The model provides 2.8-12mm lens with ICR. Featured with Digital Wide

Dynamic Range (D-WDR), the camera can provide clear images even under

backlight circumstances where intensity of illumination can vary excessively.

The EBA1280 supports both NTSC and PAL scanning systems and is IP66

certified.

1.1 Packing List

Camera x 1

Mounting Sticker x 1

L-Type Wrench x 1

Screw & Screw Anchor x 4

User Manual x 1

1.2 Features

Equipped with 1080p Full HD CMOS sensor to deliver stunning image

quality

Varifocal 2.8-12mm with ICR to capture the desired field of view

Extended IR range of up to 30m / 98ft. with 24 LEDs (depends on scene

IR reflectivity)

D-WDR to improve the visibility under high contrast scene

The flexible angle viewing with its 3-Axis rotation design allows wall or

ceiling mounting

IP66-rated with metal housing

Supports UTC function: Control camera OSD settings directly from DVR

end

1.3 Dimensions

98mm / 3.86"

120mm / 4.72"

60.2mm / 2.37"

1.4 Optional Accessory

BA-

E320

Color / Material: White / Metal

Size (Φx H): 138 x 54mm / 5.43”x2.13”

Weight: 700g / 1.5lb

BA-

EB45

Color / Material: White / Metal

Size (W x D x H): 245x160x163mm / 9.65”x6.3”x6.42”

Weight: 2.1kg / 4.63lb

1.5 Cable Description

Power Cable

Video Output Cable

No. Name Descriptions

1 Power Cable Connects to a 12VDC power source.

2 Video Output 1080p output, using 75 Ohm BNC-type coaxial cable.

2. Installation

1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw

positions. Drill four holes on the surface and insert the supplied 4 Screw

Anchors into the screw holes. If you want to run the cable through the

surface, drill a hole within the 4 screw area.

2. Unscrew the Outer Housing by twisting it counterclockwise and then

remove it from the Camera Base.

Outer Housing

Camera Base

Camera Body

3. Screw the Camera Base to the surface with the supplied four Screws.

a. If you want to wire the cables from the Side Cut on the Camera Base:

Attach the Camera Body to the Camera Base and run the cables through

the Camera Base first, and then place the cable under the Side Cut.

Finally, screw the Camera Base to the surface with the supplied 4

Screws.

Side Cut

Wall

Camera Base

Camera Body

b. If you want to wire the cables through the surface:

Attach and screw the Camera Base to the surface with the supplied 4

Screws, and then attach the Camera Body to the Camera Base.

Wall

Camera Base

Camera Body

4. Screw back the Outer Housing and adjust the camera angle

simultaneously.

360°

180°

5. Connect the Power Cable to a 12VDC power source. Connect the Video

Output Cable to a monitor or DVR.

6. For the first time installation, check whether the camera is properly

focused. If not, you can optionally adjust camera zoom and focus by

adjusting the Zoom Screw or Focus Screw using a slotted screwdriver.

Zoom

Focus

7. You can use the Joystick on the cable to configure camera OSD settings or

switch to different video formats. Remove the Protection Cap from the

Joystick before using it.

Switching Video Format:

•Push the joystick up for 5 sec. to switch to

AHD.

•Push the joystick right for 5 sec. to switch

to TVI.

•Push the joystick down for 5 sec. to switch

to CVI.

•Push the joystick left for 5 sec. to switch to

CVBS.

Configuring OSD Settings:

•Push the Joystick up / down to select

among menu items.

•Push the Joystick left / right to adjust the

level of the selected item.

•Press the Joystick to enter the submenu or

exit the OSD Setup Menu.

3. Configuration in the OSD Menu

Main

Sub Menu

Sub Menu / Function

1 AE

Brightness

0-100

Exposure

Mode

Global

Center

FLC

BLC

0-7

Return

2 AWB Mode

ATW

Gray World

MWB

R Gain

0-63

B Gain

0-63

Return

3 Day/Night Mode

Auto

Gain Day/Night

Low/Middle/High

Gain Night/Day

Low/Middle/High

Color

B/W

Return

4 Image

Enhance

Contrast

Auto/Manual

0-20

Sharpness

Auto/Manual

0-20

Saturation

Auto/Manual

0-20

3DNR

Auto/Manual

0-20

2DNR

Auto/Manual

0-20

DWDR

Close/Open

Return

5 Video

Setting

AHD

1080P25/1080P30/720P25/720P30

TVI

1080P25/1080P30/720P25/720P30

CVI

1080P25/1080P30/720P25/720P30

CVBS

PAL/NTSC

Apply & Reboot

Return

Language

ENG/CHN/CHN(T)/RUS/SPA/FRA/POL/ITA/POR/JAP/KOR/GRE

7 Function

Privacy

Mode

On/Off

Area 0-3

Display

On/Off

X Position Start

0-100

Y Position Start

0-100

Width

0-100

Height

0-100

Return

Color

Red/Green/Blue

Transparency

On/Off

Return

Motion

Mode

On/Off

Area 0-3

Display

On/Off

X Position Start

0-100

Y Position Start

0-100

Width

0-100

Height

0-100

Return

Color

Red/Green/Blue

Transparency

On/Off

Return

Version

Reset

Save & Exit

Exit

Autres manuels pour eZ.HD Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EverFocus Caméra de sécurité

EverFocus

EverFocus Indoor Pendent Dome Camera EPD200 Manuel utilisateur

EverFocus

EverFocus ED100 Series Manuel utilisateur

EverFocus

EverFocus Weatherproof Long Range IR Camera EZ230E Manuel utilisateur

EverFocus

EverFocus ED610 Manuel utilisateur

EverFocus

EverFocus ED300 Series Manuel utilisateur

EverFocus

EverFocus EZ330E Manuel utilisateur

EverFocus

EverFocus Value IP EZN1240-SG Manuel utilisateur

EverFocus

EverFocus EB100 Manuel utilisateur

EverFocus

EverFocus EZ632e Manuel technique

EverFocus

EverFocus NeVio EAN850A Manuel utilisateur

EverFocus

EverFocus EBD331e Manuel utilisateur

EverFocus

EverFocus EAN-1350 Mode d’emploi

EverFocus

EverFocus EHN3200 Manuel utilisateur

EverFocus

EverFocus Eq250 Manuel utilisateur

EverFocus

EverFocus Speed Dome EPTZ500 Manuel utilisateur

EverFocus

EverFocus ECZ230/N-4 Manuel utilisateur

EverFocus

EverFocus EPN4122 Manuel utilisateur

EverFocus

EverFocus EDH5102 Manuel utilisateur

EverFocus

EverFocus ED100 Series Manuel utilisateur

EverFocus

EverFocus ED Series Manuel utilisateur

EverFocus

EverFocus ED300 Series Manuel utilisateur

EverFocus

EverFocus EQH5202 Manuel utilisateur

EverFocus

EverFocus EBH5241 Manuel technique

EverFocus

EverFocus EM-500NHP1 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

EverFocus eZ.HD Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques