EverFocus EIP220 Manuel utilisateur

IP99 Series

EIP220 Network Camera

Install Guide

Release: Oct. 2008

This document shows you how to install IP99 camera step by step

1. Read the product introduction and package content

2. Read the specification and diagram

3. See hardware overview

4. Do wiring and installation

5. Do network connection

Product introduction

IP99 series IP products provides built-in, easy-to-use, and browser-based management

software that can manage, view, record multiples IP99 cameras and video servers. No

additional software required. It supports flexible layout of live/playback views, easy-to-

use on-screen PTZ control, and instant zoom in/out. The true tri-plex gives users

simultaneous live view, playback, and record experience. The auto-overwritten recording

function allows IP99 IP camera can be used as a DVR-like recording, avoided disk

writing overflow.

IP99 series camera

This product comprises a web-based user interface, user-friendly feature facilitates

installation procedure. Moreover the open system structure saves the cost of coaxial cable

demand while improving quality of the image. IP99 series is a flexible and effective

solution for an interactive surveillance and remote surveillance system. It is easy to install

and easy to use.

Product features

Easy to use — IP99 series is easy to use, the only thing you need to do is to assign a

valid IP address. The only firmware required for this series is Microsoft IE 4.X or above.

Low cost — It provides a reliable and low cost video source. No need of expensive

firmware, management station nor expensive video cable.

Open environment — Supports TCP/IP network, SMTP E-mail, HTTP and other related

network protocols.

Easy management — Using standard web browser, you can assign and manage IP99

series directly through web page. It is even possible to upgrade firmware remotely.

Standard video format — IP99 series use MPEG 4 comclickion technology to produce

high quality images. User can view the images through any web browser.

Widely applicable — IP99 series provides live images on the network, it enhances

functionality of traditional television system. IP99 series allows direct connection to visit

remote video through standard IE, user can view local image as well as remote video any

time any where. IP 99 series can be used for alarm surveillance, traffic surveillance,

banking application, parking lot, factory surveillance, industry surveillance. Moreover,

IP99 series supports SMTP e-mail which allows the system to send out event image as an

attachment of the e-mail when an event occurs.

External connection — External devices include: IR sensor, switch, alarm relay or other

device that can trigger IP99 series.

PTZ connection — You can adjust camera’s direction by connecting a PTZ device to

IP99 series through a RS485 interface.

Security — IP99 series includes a web server, meaning that it can process safety control

as any other server. Web administrator can decide which individual, group, company or

even the whole world to visit your IP camera. This protection can be done by setting user

authority in IP99 series, or by connecting to a company’s internet.

Package Content

Network Camera

Quick Start Guide

CD( Install Gudie, Manual, IP99 Searcher Tool)

Optional Accessories & Related Product

3.5~8 Lens

5~50 Lens

BA-01 Bracket

BA-03 Bracket

Testing Monitor EN220

SPECIFICATIONS

CAMERA

Pickup Device 1/3" Sony Super HAD Interlaced CCD

Video Format NTSC/PAL

Pixel Effective NTSC: 510 (H) x 492 (V); PAL: 500 (H) x 582 (V)

Sensitivity 0.3 Lux / F=1.2

Day & Night Yes

Lens C/CS Mount

Video Output BNC socket, composite 1 V p-p / 75Ω

Video Output Resolution 380 TVL

AUDIO

Audio Input One way audio

Audio Format A-Low/u-Low

VIDEO

Electronic Shutter Auto/Manual

Backlight Comp. On/Off

Mirror On/Off

Auto Iris Direct Drive Switch

AGC/Brightness/Contrast/Color Adjustable

Video Comclickion MPEG-4

Video Resolution

D1: 720x480 (NTSC) 720x576 (PAL)

Half D1: 720x240 (NTSC) 720x288 (PAL)

CIF: 352x240 (NTSC) 352x288 (PAL)

QCIF: 176x120 (NTSC) 176x144 (PAL)

Frame Rate Up to 30fps

NETWORK

Interface 10Base-T/100Base-TX auto-negotiation, RJ-45 socket

Supported Protocols HTTP, TCP / IP, UDP, FTP, NTP,SMTP, DHCP, DNS, DDNS, PPPOE

Network Security 3 Level Security Protection

Max. Client Limit 20 simultaneous clients

PTZ Device Control RS485 (Pelco-P/Pelco-D)

RECORDING

Manual Recording

Up to 30fps

Motion Detection Recording Up to 30 sec. pre-event recording and 60 sec. post-event recording

Alarm Recording Up to 30 sec. pre-event recording and 60 sec. post-event recording

MOTION DETECTION &

ALARM

Physical Alarm I/O 2 CH alarm input/2 CH alarm output

Notification Record video to PC , Send email notification ( jpeg file ), FTP upload upon

motion detection and alarm trigger

Manual Trigger Alarm Output Yes, High or Low Button in Alarm Setting

PLAYBACK

Playback Video Source

Local PC

Playback Speed Forward x2, x4, x16, x32. Rewind x1, x2,x4,x16,x32

POWER

Power Supply 12 VDC

Power Consumption 9W max

PHYSICAL

Weight 340g/0.749lbs

Dimensions 66.5mm(W)x143.3mm(D)x59.3mm(H) ; 2.66”(W)x5.73”(D) x 2.37”(H)

ENVIRONMENTAL

Operating Temp. -10°C ~ 50°C / 14°F ~ 122°F

Humidity 20%~80%

Dimension Diagram

59.3mm/2.37”(H)

143.3mm/5.73”(D)

66.5mm/2.66”(W)

Hardware Overview

Reset: loading factory default configuration by pressing the button, which is

inside this hole. Please insert the keen-edged device to the hole for 10 seconds.

RS485(Pelco-P/Pelco-D): RS 485 Connector functionally reserved for PTZ

control.

Power LED: Power LED will light up when power is ON.

Ethernet RJ-45 port: Connect to LAN via this standard RJ-45 connector.

Power 12VDC: Connect with power adaptor

Video Out: Loopthrough connection to the video signal from the Video In

connector. Terminated with a coaxial/BNC connector.

Alarm In/Out: Connect to Alarm In/Out device.

Installation

a. Mount camera bracket BA-01, BA-03 (optional) on the wall. And screw it on the

wall firmly.

b. Mount Camera on the bracket

c. Connect a lens on the camera. Connect DC iris plug if using DC auto iris lens

d. Connect 12VDC power.

e. Connect BNC to testing monitor and adjust lens focus and zoom, view angle.

f. Connect CAT5 cable and do network connection. Refer to 3. Network Connection

g. Install IP searcher tool and assign IP address if you connect to multiple cameras.

See Manual for detail of IP99 searcher tool

Network Connection

This section tell you how to do different types of network connections to IP99

1. Router or LAN connection

This is the most common connection that allows multiples PC to see IP99 cameras/

encoders in pre-existing LAN through a router.

By doing port forwarding, you can view camera outside of internal LAN on internet.

2. Direct High Speed Connection

Direct High Speed Connection connect camera directly to modem without a router.

You need to assign the IP address you obtain from internet service provider to IP camera/

Encoder. To access the camera, just type http:// IP address of your internet provider. If

you have a dynamic IP address, this connection doesn’t work for you.

3. One to one connection from PC to IPcamera

With a cross-over cable, you can connect directly without switching. However, only

the PC connecting to camera can view the IP camera.

Autres manuels pour EIP220

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EverFocus Caméra de sécurité

EverFocus

EverFocus EZ930 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus EZ180 Manuel utilisateur

EverFocus

EverFocus ED610 Manuel utilisateur

EverFocus

EverFocus EPA6220 Manuel utilisateur

EverFocus

EverFocus EPTZ3000 Manuel utilisateur

EverFocus

EverFocus ED550 Manuel utilisateur

EverFocus

EverFocus EQ120 Manuel utilisateur

EverFocus

EverFocus POLESTAR EHN7260 Manuel utilisateur

EverFocus

EverFocus ECZ230/N-4 Manuel utilisateur

EverFocus

EverFocus H.265 VANGUARD II Series Manuel utilisateur

EverFocus

EverFocus EBN288 Manuel utilisateur

EverFocus

EverFocus ED710 Manuel utilisateur

EverFocus

EverFocus EQ610x Manuel utilisateur

EverFocus

EverFocus EQ200E Manuel technique

EverFocus

EverFocus ED2250S/P Manuel utilisateur

EverFocus

EverFocus EPTZ3600 Manuel utilisateur

EverFocus

EverFocus ED100 Series Manuel utilisateur

EverFocus

EverFocus EI220 Manuel utilisateur

EverFocus

EverFocus EPTZ2700 Manuel utilisateur

EverFocus

EverFocus ED300 Series Manuel utilisateur

EverFocus

EverFocus EZA2880 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus ED710 Manuel utilisateur

EverFocus

EverFocus EZA2580 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus ED610 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur