EverFocus NeVio EAN800A Manuel utilisateur

EAN800A/EAN800AW

User’s Manual

Release: Dec. 2009 Rev.D

EAN800A/EAN800AW

Product Name: EAN 800A EverFocus IP Network Cameras

Model Number(s): EAN800A/EAN800AW

FCC Notice "Declaration of Conformity Information"

RF Declaration should be added. Please check Safety team.

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

Installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this equipment, not expressly approved

by EverFocus or parties authorized by EverFocus could void the user's authority to

operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with

any other antenna or transmitter.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

EverFocus Electronics Corp.

12F, No. 79, Sec. 1, Shin-Tai Wu Rd., His-Chi,

Taipei Hsien, Taiwan, R.O.C.

EAN800A/EAN800AW

EAN800A/EAN800AW complies with CE and FCC.

About this document

All the safety and operating instructions should be read and followed before the

unit is operated. This manual should be retained for future reference. The

information in this manual was current when published. The manufacturer reserves

the right to revise and improve its products. All specifications are therefore subject

to change without notice.

Safety Notice

-These limits are designed to provide reasonable protection. This equipment

generates, uses and can radiated radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures: -Reorient or relocate the receiving antenna.

-Increase these separations between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

To reduce risk of fire or electric shock, do not expose this appliance to rain or

moisture.

Do not attempt to disassemble the appliance. To prevent electric shock, do

not remove screws or covers. There are no user-serviceable parts inside.

Contact qualified service personnel for maintenance. Handle the appliance with

care. Do not strike or shake, as this may damage the appliance.

Do not use strong or abrasive detergents when cleaning the appliance body.

Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to

EAN800A/EAN800AW

remove, use a mild detergent and wipe gently.

Do not operate the appliance beyond its specified temperature, humidity or

power source ratings. Do not use the appliance in an extreme environment where

high temperature or high humidity exists. Use the appliance at temperature within

0℃~ +40℃/ 32 ~ 104 and a humidity below 90%. The input power source for

this appliance is 12 VDC & PoE.

Use only the recommended power supplies. Power supplies must comply

with the requirement of the latest version of IEC60950-1. Substitutions may

damage the unit or cause a fire or shock hazard.

Electrostatic-sensitive device. Use proper CMOS/MOSFET handing

precautions to avoid electrostatic discharge.

Installation should be performed by qualified service personnel only in

accordance with the National Electrical Code or applicable local codes.

Terms and Trademark

Ethernet, Internet Explorer, Linux, Microsoft, Windows, WWW are registered

trademarks of the respective holders. Other product names appearing in this User's

Guide may be trademarks or registered trademarks of their respective holders.

Java™ and all Java-related logos and trademarks are trademarks or registered

trademarks of Sun Microsystems, Inc. in the United States and other countries.

Support

If the unit ever needs repair service, the customer should contact the nearest

EverFocus Electronics Corp. Service Center for return authorization and shipping

instruction.

AboutACAdaptor

Specifications for AC adaptor

Power Supply: 12VDC, 1 A

Power Output: 12VDC, 1 A

Operating Temperature: 0 ~ 40 / 32 ~ 104

External Dimensions: 56 mm x 68 mm x 101 mm / 2.24” x 2.72” x 4.04”

EAN800A/EAN800AW

TABLE OF CONTENTS

1. INTRODUCTION....................................................................................................6

2. FEATURES ..............................................................................................................6

3. ACCESSING THE CAMERA MENU...................................................................7

4. SETTING................................................................................................................10

4.1 SYSTEM INFO ......................................................................................................10

4.1.1 Information .................................................................................................10

4.1.2 Log ..............................................................................................................11

4.2 USER CONFIG......................................................................................................12

4.3 NETWORK ...........................................................................................................14

4.3.1 Network.......................................................................................................14

4.3.2 DDNS..........................................................................................................17

4.3.3 Bandwidth ...................................................................................................18

4.3.4 SMTP/FTP ..................................................................................................19

4.3.5 Network Alarm (reserved for PowerCon)...................................................21

4.3.6 Wireless (EAN800AW)...............................................................................22

4.4 VIDEO .................................................................................................................23

4.4.1 Multi Streaming ..........................................................................................23

4.4.2 Camera ........................................................................................................25

4.5 AUDIO .................................................................................................................27

4.6 USER .................................................................................................................28

4.7 EVENT...............................................................................................................29

4.7.1 Event ...........................................................................................................29

4.7.2 Motion.........................................................................................................32

4.7.3 Alarm...........................................................................................................33

4.7.4 Time Mask ..................................................................................................34

4.8 SYSTEM............................................................................................................35

4.8.1 Date/Time....................................................................................................35

4.8.2 Daylight Saving ..........................................................................................37

4.8.3 SD Card.......................................................................................................38

4.8.4 Maintenance................................................................................................40

5. SPECIFICATIONS................................................................................................42

EAN800A/EAN800AW

1. INTRODUCTION

The EAN800A/EAN800AW network camera provides H.264, MPEG-4 and MJPEG

compression for multi-streaming capabilities. H.264 is the most advanced video

compression technology that saves your bandwidth without sacrificing video quality.

Designed with advanced digital processing circuitry for high resolution 1/3'' color

CCD sensor, it can control AGC, BLC, FL, ES, H-Mirror, IRIS Level and Day/Night

function through web browser. Built-in IEEE 802.11b/g wireless connection gives you

the freedom to place the camera where it's needed. EAN800A/EAN800AW is the

most flexible IP solution for all your application needs.

2. FEATURES

zBuilt-in H.264, MPEG-4 and MJPEG digital signal output at Full D1 image size

with up to 30fps.

zH.264/MPEG4/MJPEG multi stream output for simultaneous live monitoring

and high resolution recording.

zSupport 4 independent video streams that can provide different compression

formats and resolutions.

zThe high sensitivity of 0.4Lux/F=1.2 is achieved by using the advanced

1/3”Sony Super HAD color CCD.

zPower over Ethernet (PoE) IEEE 802.3af.

zSupport MDI/MDI-X auto crossover function

zBandwidth control:64K/128K/256K/1M/2M/4M/8M bps and unlimited.

zBuilt-in network interface (10Base-T/100Base-TX) for remote monitoring by

PC.

zSmart Wizard settings for varied event and schedule recording conditions.

zBuilt-in SD memory card slot for local storage and support SD High Capacity

(optional).

zBuilt-in digital Motion Detection.

zBuilt-in digital zoom function.

zAGC, BLC, FL, ES, H-Mirror, IRIS Level and Day/Night function control

through web browser.

zTwo way audio.

zBuilt-in IEEE 802.11b/g wireless module (EAN800AW).

EAN800A/EAN800AW

3. ACCESSING THE CAMERA MENU

Step 1.Start an Internet Explorer browser.

Step 2. Enter the IP address or host name of the camera in the Location/Address

field of your Internet Explorer browser. (Please refer to EAN800A/EAN800AW

Installation Guide for how to find the IP address)

Step 3. Input “Username” and “Password”. Default Username is “user1” and

default password is “11111111”.

Step 4. Click “Login” button.

Step 5. You might be required to download Active X, which is required to view

camera video. Please click "Yes".

Step 6. Congratulation!! You should be able to see the live image now.

EAN800A/EAN800AW

1. Press button to display the "Live" page.

Double click on the image to show a full screen display, double click again or press

ESC to return normal display.

2. Press button to enter Setting page. In Setting page, there

are 8 sections: [System Info], [User Config], [Network], [Video], [Audio], [User],

[Event] and [System]. Please refer to “4. SETTING” for further information.

3. Press button to close the network page.

4. Video Stream

Select Video Stream from Stream 1 / Stream 2, Stream 3 and Stream 4. Please refer to

“4.4.1 Multi Streaming” for further information.

5. View Size

You can select View size to either reduce or enlarge the image to the appropriate view

size.

Select the view size for live images from:

NTSC: 704*480/640*480/352*240/320*240/176*120

PAL: 704*576/640*480/352*288/320*240/176*144

6. Digital Zoom

Press “+” or “-“ button to enlarge / reduce the displayed image. (max. is X10)

7. Record

The record button is used to record the current video stream. The location where the

image file is saved can be specified in Setting -> User’s Config. Please refer to “4.2

User Config” for further information.

EAN800A/EAN800AW

8. Snapshot

The Snapshot button saves a snapshot of the video image currently being

displayed. The location where the snapshot data is saved can be specified in Setting ->

User’s Config. Please refer to “4.2 User Config” for further information.

9~10. Play Audio/Transmit Audio

Click the “Play Audio” and “Transmit Audio” buttons to switch the sound off and on

for the speaker and microphone, respectively.

11. Manual Control – Trigger Event

Press “Trigger Event” button to trigger an event directly from live view page, and

event actions will be effective if they have been set in “Event” menu. (Please refer to

“4.7.1 Event”)

12. Manual Control – Reset Alarm

Press “Reset Alarm” button to reset alarm output remotely.

13. Status Display

The name of the camera whose settings currently being configured, current date/time

and current frame rate will be displayed.

14. Event signals

When an alarm or motion event is triggered, a signal icon will flash to alert user.

The first icon is for alarm event and rest of the 5 icons are for motion event. The

motion event icons which differed by colors correspond to the motion trigger areas

you have set in Motion menu. Please refer to “4.7.2 Motion” for detailed information

about Motion setup.

ote: Record segment is limited to 5 min. If you need to do long time recording,

please set schedule recording. For more details about schedule recording,

please see “4.7 Event”.

Motion

Alarm

EAN800A/EAN800AW

4. SETTING

Click this button to display the setup menu.

4.1 System Info

System information and system log check of the setup menu can be performed on this

page. The “System Info” page has 2 tabs: [Information] tab and the [Log] tab.

4.1.1 Information

System Information: Firmware version, MAC address, Video Type, Model number.

(unchangeable, for reference only)

Autres manuels pour NeVio EAN800A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EverFocus Caméra de sécurité

EverFocus

EverFocus WDII EQ600 Manuel utilisateur

EverFocus

EverFocus PoleStar EQ550 Manuel utilisateur

EverFocus

EverFocus EQ650 Manuel utilisateur

EverFocus

EverFocus ED350 Manuel utilisateur

EverFocus

EverFocus ECD230/N3W Manuel utilisateur

EverFocus

EverFocus EQH5200 Manuel utilisateur

EverFocus

EverFocus Eq250 Manuel utilisateur

EverFocus

EverFocus EHA2880 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus EB200 Manuel utilisateur

EverFocus

EverFocus EZ-VF325NH Manuel utilisateur

EverFocus

EverFocus WDII EQ600 Manuel utilisateur

EverFocus

EverFocus EZA2580 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus H.265 VANGUARD II Series Manuel utilisateur

EverFocus

EverFocus EQ200A Series Manuel utilisateur

EverFocus

EverFocus Speed Dome EPTZ1000 Manuel utilisateur

EverFocus

EverFocus EZA2580 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus EFD300A Manuel utilisateur

EverFocus

EverFocus EQ610x Manuel utilisateur

EverFocus

EverFocus EHD500IR Manuel utilisateur

EverFocus

EverFocus ED200 Series Manuel utilisateur

EverFocus

EverFocus EPTZ9200 Series Manuel utilisateur

EverFocus

EverFocus EHD150 Manuel utilisateur

EverFocus

EverFocus EPN Plus Series Manuel utilisateur

EverFocus

EverFocus ED335 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur