EverFocus EPTZ3000 Manuel utilisateur
Speed Dome
EPTZ3000/EPTZ3000I
USER MANUAL
Date: Feb15, 2006
1-1
Table of Contents
1. EPTZ3000/EPTZ3000I OVERVIEW...................................... 1-3
1.1. Introduction .............................................................................................1-3
1.2. Specifications..........................................................................................1-5
1.3. Feature .....................................................................................................1-7
1.3.1. Profile of EPTZ3000/EPTZ3000I........................................................1-7
1.3.2. EPTZ3000/EPTZ3000I Base Board ...................................................1-8
1.3.3. EPTZ3000/EPTZ3000I Control Board................................................1-9
1.4. EPTZ3000/EPTZ3000I Connection .......................................................1-10
1.5. EPTZ3000/EPTZ3000I Quick Operation Guide (Work with EKB500) .1-11
2. EPTZ3000/EPTZ3000I INSTALLATION............................................ 2-12
2.1. Packing List...........................................................................................2-12
2.2. Cable Needed.........................................................................................2-12
2.3. Initial Setup............................................................................................2-13
2.3.1. Address Setting................................................................................2-14
2.3.2. Communication Protocol Setting......................................................2-17
2.3.3. Transmission Speed Setting (Baud Rate Setting) ............................2-17
2.3.4. RS-485 Bus Terminal Resistance.....................................................2-18
2.4. Rack and Speed Dome Installation......................................................2-19
2.4.1. Installation Requirements.................................................................2-19
2.4.2. EPTZ3000 Dome Camera Wall Mount Installation...........................2-19
2.4.3. EPTZ3000I Dome Camera Installation.............................................2-22
2.5. Accessories...........................................................................................2-25
2.5.1. EPTZ-CPMA: Ceiling Pendant Mount Adapter.................................2-25
2.5.2. EPTZ-PMA: Pole Mount Adapter......................................................2-25
1-2
2.5.3. EPTZ- CMA: Corner Mount Adapter.................................................2-26
3. EPTZ3000/EPTZ3000I CAMERA SETUP MENU.............................. 3-27
3.1. Structure of the Setup Menu ................................................................3-27
3.1.1. Camera Setup Menu........................................................................3-28
4. EPTZ3000/3000I FUNCTION SETUP AND OPERATION................. 4-34
4.1. Manual Control Mode............................................................................4-34
4.2. Auto Pan Mode ......................................................................................4-34
4.3. Position Setting.....................................................................................4-34
4.4. Tour Mode ..............................................................................................4-35
4.5. Alarm Link to a Position/Tour...............................................................4-36
4.6. Other operations ...................................................................................4-36
APPENDIX : The Alarm I/O Connection................................................ 4-37
1-3
1. EPTZ3000/EPTZ3000I OVERVIEW
1.1. Introduction
EPTZ3000/EPTZ3000I, an intelligent high-speed dome camera is ready to secure
your property with its omni-directional and exact monitoring.A 30X optical and 8X
digital zoom combining with a high-performance chip makes captured images clear
and vivid. The other powerful camera functions EPTZ3000/EPTZ3000I equips with:
Wide Dynamic makes objects clear in a high illumination background.
Vertical double density interline CCD with a slower shutter and true
Day/Night function.
Electronics flip, no mechanical flip is necessary.
520 color/570 B&W TVL; PAL/NTSC image formats support.
Auto and fast focus increases the searching speed and precision.
Auto Iris adjusts the monitoring image to the best brightness.
White Balance function makes the shades of color more natural in different
light conditions.
Color / B&W images auto switching to enhance the sensitivity in a low light
condition or at night.
Private zone protects your privacy.
1-4
Furthermore, the micro control unit enables camera a nimble and exact movement
from minimal 0.01°/sec to maximal 360°/sec. It can go to every preset position in 1
second. It also has other advantages such as:
239 preset positions are available.
16 cruise tours can be set, and each tour contains up to 16 positions.
Up to 256 speed domes can be supported on a RS-485 bus when all speed
domes are controlled by keyboard EKB500.
Auto heater and fan to fit all kinds of temperature (outdoor models).
Built-in 4 alarm inputs and 1 alarm output.
All of the features make the intelligent high-speed dome camera works for a wide
range and demanding application such as banks, airports, stations, casinos, streets
of cities, intelligent buildings, and etc.
1-5
1.2. Specifications
Model EPTZ3000 (outdoor) EPTZ3000I (indoor)
Power Supply AC 24V
Power consumption 70W with heater 18W without heater
Operating temperature ﹣40℃~+60℃ 0℃~+40℃
Image device 1/4”, Vertical double density interline CCD
Zoom ratio 30x Optical (8x Digital zoom, max 240x)
Lens 30x optical zoom, f=3.3 mm (wide) to 99.0 mm (tele), F1.6 to F3.2
Viewing angle H: Approx. 58.0°(wide) to 2.22°(tele end)
V: Approx. 44.8°(wide) to 1.68°(tele end)
Resolution 520 TVL : Color; 570 TVL : B/W
WDR (Wide Dynamic Range) 52dB
Minimum illumination 0.3 lux/F1.6 (50 IRE) Color; 0.05 lux/F1.6 (50 IRE) B/W
Focus Auto/Manual
Iris Control Auto/Manual
Shutter selection ESC; A.FLK; Manual (1/120000~x8) selectable
Operating moisture ≤95%
Communication RS-485
Communication speed 1200/2400/4800/9600bps
Horizontal rotation speed 0.01°/s－360°/s (1-239 grade shift gears)
Horizontal rotation range 360° unlimited rotation
Tilt rotation range 180° pendulum motion
Auto zoom speed control Control speed auto-adjusted according to zoom length changing
Auto Pan, 2 points scanning Can set freely
Auto Pan speed 1－239 grade available
Dwell time (2 points) 1－239 second available
Preset Positions 239 positions
Running to position speed 1－239 grade available,0.01º/s - 360º/s
Dwell time at preset position 1－60s available
Tour 16 group
Tour point per group 16 preset positions
Fan, Heater (outdoor model) Fan and heater auto starts
Position Accuracy ±0.1°
Alarm 4 in 1 out with tour/position auto triggering
Proportional Pan Speed Yes
Built-in menu for functions Yes
Built-in Protocols EVF-1, Pelco-P, Pelco-D, A-Type
1-6
Communication RS-485
Address editable Yes (through DIP switch)
Speed Dome Address 0-255
Manual Pan/tilt speed Pan: 0.01º ~ 360º/s ; Tilt: 0.01º ~ 360º/s
Video Output BNC
Safety CE, FCC
Dimension 220(W) x 310(H)mm
Weight 3.2kg
1-7
1.3. Feature
1.3.1. Profile of EPTZ3000/EPTZ3000I
Wall Mount Bracket
Housing
Inner Housing
M5 Bolt (Hex) x3
M3 Bolt x3
BNC Cable
Power Cable
RS485 Cable
Connection Bus
Bulb
Mechanical Part
Camera Module
Control board
Base PCB board
Housing
Clip
BNC Cable
Power Cable
RS485 Cable
Connection Bus
Bulb
Mechanical Part
Camera Module
Control board
Base PCB board
Ceiling
Button
EPTZ3000I
EPTZ3000
1-8
1.3.2. EPTZ3000/EPTZ3000I Base Board
The base board that is on the bottom of the housing connects to power cable, video
cable, control cable, alarm cable, fan and heater. In order to connect to cables, the board
needs to be taken off, and put back after finishing connecting to all cables. The connectors
of cable names are marked on the board in white text. The details of the alarm connector
(JP5) are shown on the APPENDIX A.
For EPTZ3000 outdoor model, JP1, JP3 and JP6 that are two-pin connectors need to
be taken off during installing. JP1 and JP3 are connectors for heater, and they can be
switched. JP6 is a fan controller connector that turns on/off of the fan. The 3 cables are too
short to be connected to a wrong connector when putting them back.
RELAY
JP6 JP4
JP3 JP1
JP5
Video +
Video -
RS485 +
RS485 -
AC24
AC24
EPTZ3000 Baseboard
RELAY JP5
Video +
Video -
RS485 +
RS485 -
AC24
AC24
EPTZ3000I Baseboard
1-9
1.3.3. EPTZ3000/EPTZ3000I Control Board
The PCB board with two dipswitches is the control board of EPTZ3000/EPTZ3000I. The
two switches are used to set address, protocol, Baud Rate, video format and terminal
resistance.
SW1
ON
12345678
CPU
ON
12345678
SW2
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
Protocol
BAUD
Autres manuels pour EPTZ3000
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels EverFocus Caméra de sécurité
EverFocus
EverFocus HDCCTV EZH5242 Manuel utilisateur
EverFocus
EverFocus eZ Tracker EFN3320 Manuel utilisateur
EverFocus
EverFocus EBD430/MV2 Manuel utilisateur
EverFocus
EverFocus EHN3160 Plus Manuel utilisateur
EverFocus
EverFocus EHD705 Manuel technique
EverFocus
EverFocus EPTZ100 Manuel utilisateur
EverFocus
EverFocus EHA1280 eZ.HD Series Manuel utilisateur
EverFocus
EverFocus EHA1280 eZ.HD Series Manuel utilisateur
EverFocus
EverFocus WDII EQ600 Manuel utilisateur
EverFocus
EverFocus EHH5200 Manuel utilisateur
EverFocus
EverFocus EM200/N-3 Manuel utilisateur
EverFocus
EverFocus EQ610 Manuel utilisateur
EverFocus
EverFocus ECD900B Manuel utilisateur
EverFocus
EverFocus EHD Series Manuel de formation
EverFocus
EverFocus EMN2260 Manuel utilisateur
EverFocus
EverFocus EPN4230d Manuel utilisateur
EverFocus
EverFocus ED200E Manuel utilisateur
EverFocus
EverFocus EHH5241 Manuel du propriétaire
EverFocus
EverFocus NeVio EAN800A Manuel utilisateur
EverFocus
EverFocus EQ200E Manuel utilisateur
