EverFocus EQ610e Manuel utilisateur

EQ610e

Indoor Box Camera

700TVL True Day/Night, D-WDR

User’s Manual

* Lens not included.

Release Date: February, 2013

CAUTIONS

1. Do not install the camera near electric or magnetic fields.

2. Never disassemble the camera beyond the recommendations in this manual

nor introduce materials other than those recommended herein.

3. Try to avoid facing the camera toward the sun.

4. Keep the power cable away from water and other liquids and never touch

the power cord with wet hands.

5. Never install the camera in areas exposed to oil, gas or solvents.

6. Do not operate the camera beyond the specified temperature or humidity.

Use the camera at temperatures within -10°C~50°C (14°F~122°F) and

humidity between 20%~ 80%; this device is not rated as submersible.

7. Determine the polarity of the power adapter pigtail before connecting the

camera to the power source. The input power source is 12 VDC / 24 VAC or

90-260 VAC~.

ED610e

1. INTRODUCTION

The EverFocus EQ610e box camera features an incredible 700TVL resolution in

full color with a low-light sensitivity of 0.03 lux. Delivered by a 1/3” Sony 960H

CCD sensor, the camera also features the added benefits of advanced Effio-E DSP

technology to enhance image quality. This camera also utilizes technologies like

DNR (to reduce recording file sizes and thus conserve DVR HDD space), Digital

Wide Dynamic Range, True Day/Night mode switching with ICR (Infrared Cut

Removable filter) module, Privacy Masking, Motion Detection, and much more!

1.1 FEATURES

•700TVL superior image quality with 1/3” Sony 960H CCD sensor.

•The Sony Effio-E platform performs advanced camera functions

•True Day/Night function with ICR (Infrared Cut Removable) module.

•High sensitivity, low smear, high anti-blooming and high S/N ratio for

high-performance video.

•Easy-to-use OSD Setup Menu.

•D-WDR functions enabled by Sony ATR technology handle tough backlight

conditions.

•Built-in Back Light Compensation (BLC), Auto Electronic Shutter (AES), Auto

Gain Control (AGC) and Auto White Balance (AWB).

•Built-in Motion Detection and Privacy Mask advanced surveillance

functions.

1.2 PACKAGE CONTENTS

•1 x Camera Unit

•1 x User’s Manual

•1 x Accessory Pack with Screws

•1 x Mounting Bracket

•1 x C-mount Adaptor

•1 x Power Pigtail Cable (only for 12 VDC / 24 VAC model)

ED610e

1.3 SPECIFICATIONS

Pickup Device 1/3" Sony 960H CCD

Video Format NTSC, PAL

Picture Elements (H x V) NTSC: 1020 x 508

PAL: 1020 x 596

Horizontal Resolution 700TVL

Sensitivity 0.03Lux / F1.2

S/N Ratio Over 52dB (AGC off)

Video Output 1.0Vp-p Composite, 75Ω; BNC

Gamma Correction 0.45

Lens Type C/CS Mount (Lens sold separately)

Back Light

HLC / BLC / OFF

Auto Electronic Shutter 1/60(50) ~ 1/100,000 sec.

Auto Gain Control AUTO (4 Steps)

Auto White Balance ATW / Push / User1 / User2 / ANTI CR / Manual /

Push Lock

Sync. Mode Internal

Day & Night Mode AUTO / Color / B&W / EXT1 / EXT2

OSD Menu OSD Control (English / Japanese / German / French /

Russian / Portuguese / Spanish / Simplified Chinese)

DNR On/Off switch

D-WDR (ATR) On / Off Switch

Mirror On / Off switch

Motion Detection On / Off for 24 x 16 Detection Zone Blocks

Privacy Mask On / Off for 8 Zones Programmable, Mosaic

Power Source

Two types: 90-260 VAC~ or 12 VDC / 24 VAC~

Power Consumption

12 VDC / 24 VAC~: 2.5W max.

90-260 VAC~: 3W max .

Operating Temperature -10˚C~50˚C / 14˚F~122˚F

Dimensions (WxDx H) 68mm x 56mm x 120mm / 2.6” x 2.2” x 4.7”

Weight

290 g / 0.64 lbs

Certifications CE / FCC

ED610e

2. CAMERA OVERVIEW

2.1 NAMES AND FUNCTIONS OF PARTS

2.1.1 FRONT PANEL

2.1.2 BRACKET POSITIONS

The bracket in the package can be fitted to the screw holes on the top or bottom

of the camera for either suspending the camera or supporting it.

Light Sensor

Microphone

(Reserved for

Audio-supporting

models)

Top bracket position Bottom bracket position

ED610e

2.1.3 Back Panel

Back Panel:

GND

D/N Out

D/N In

Motion

RS485-

RS485+

LINE IN

AC 24V /

DC 12V

+ -

12 VDC / 24 VAC~ Model 90-260 VAC~ Model

Side Panel:

1) Left-scroll button

2) Up-scroll button

3) Set button (push to activate OSD)

4) Right-scroll button

5) Down-scroll button

6) Video Output Connector

BNC connector that connects to a 75 Ohm type coaxial cable to feed the

video output of the camera to a color monitor or other video devices.

7) Power Input Terminal

Connects to the appropriate power source.

8) Auto Iris Lens Connector

This connector is used to connect to an auto iris lens via a 4 pin male

connector

Direct Drive Pin1 Pin2 Pin3 Pin4

Cnt- Cnt+ Drv+ Drv-

ED610e

3 INSTALLATION

1. Unscrew the protection cap from the mouth of the lens mounting.

2. If a C-mount lens is to be used, please screw the C-mount adaptor ring (the

5mm-thick ring in the accessory pack) on to the mouth of the lens mounting.

3. Mount the lens by turning it clockwise on the lens mounting of the

camera.

4. If you use an Auto Iris lens, connect the lens’s cable to the Auto Iris

lens connector on the side of the camera.

5. Place an ND filter in front of the lens, adjust the lens focus until the

best image is obtained.

6. Lock the lens’s focus position by tightening the swivel screw, then

remove the ND filter.

Mount the lens

ED610e

4. CONNECTIONS

Connect the cable from the video output jack of the camera to the monitor’s

input jack.

5. CAMERA SETUP OPERATIONS

This camera utilizes an On Screen Display (OSD) user setup menu.

5.1 SETUP BUTTONS

To set items on the user setup menu, use the following buttons on the back

panel.

E X T.

SENSOR

The cursor direction buttons and the SET/Enter button

Set (Enter) button

ED610e

①ENTER

Press this button (by pressing straight down on the stick) to display the

OSD’s main menu on the monitor that you have connected directly or

indirectly to the camera’s video connector. Also press this button to

confirm changes and to open the submenus when they’re available and

selected. (Menu items with a “<┘” symbol at the end contain submenus.

For adjusting submenu items, select the desired menu item with the 

and buttons and press the ENTER button to open the desired

submenu. Use the and buttons to toggle between value options.)

②R (RIGHT)

Press this button (by pressing the control stick to the right) to move the

on-screen cursor to the right to select items or to adjust the

level/intensity of a selected function. The level/intensity increases when

this button is pressed.

③L (LEFT)

Press this button (by pressing the control stick to the left) to move the

cursor to the left to select items or to adjust the level/intensity of a

selected function. The level/intensity decreases when this button is

pressed.

④D (DOWN)

Press this button (by pressing the control stick in the “down” direction)

to scroll the on-screen cursor downwards between menu items.

⑤U (UP)

Press this button (by pressing the control stick in the “up” direction) to

scroll the on-screen cursor upwards between menu items.

Table des matières

Autres manuels EverFocus Caméra IP

EverFocus

EverFocus EAN Plus Series Manuel utilisateur

EverFocus

EverFocus EZN3160 Plus Manuel utilisateur

EverFocus

EverFocus EMW930 Manuel utilisateur

EverFocus

EverFocus EMD432 Manuel utilisateur

EverFocus

EverFocus EQN100 Manuel utilisateur

EverFocus

EverFocus EHN3261 Manuel utilisateur

EverFocus

EverFocus ED230 Manuel utilisateur

EverFocus

EverFocus NeVio EDN850H Manuel utilisateur

EverFocus

EverFocus EBD934Q Manuel utilisateur

EverFocus

EverFocus EZA1240 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus EMN2120 Manuel utilisateur

EverFocus

EverFocus ECZ230E Manuel utilisateur

EverFocus

EverFocus EDN Plus Series Manuel utilisateur

EverFocus

EverFocus EMF917F Manuel utilisateur

EverFocus

EverFocus EPN4122 Manuel utilisateur

EverFocus

EverFocus ETN Series Manuel utilisateur

EverFocus

EverFocus ED335 Manuel utilisateur

EverFocus

EverFocus EZN3261 Manuel utilisateur

EverFocus

EverFocus EZA1280 eZ.HD Series Manuel utilisateur

EverFocus

EverFocus EPN4230d Manuel utilisateur

EverFocus

EverFocus NeVio EDN850H Manuel utilisateur

EverFocus

EverFocus EDN Plus Series Manuel utilisateur

EverFocus

EverFocus NeVio EDN850H Manuel utilisateur

EverFocus

EverFocus EZN Plus Series Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur