EUPA IEZ Manuel utilisateur

IEZ / ITZV4

Micro-ATX Intel 810E

Micro-ATX Intel 810

Socket 370 Motherboard

User’s Guide

Model : IEZ / ITZV4

Manual Version : English, version 1.0

Release Date : JAN 14, 2000









CopyrightCopyright

No part of this publication may be reproduced, transmitted, transcribed, stored in

a retrieval system or translated into any language in any form or by any means,

electronic, mechanical, magnetic, optical, manual or otherwise, without the prior

written consent of the copyright holders.

UserUser

User¯¯

¯¯

¯sNoticeNotice

NoticeNotice

Notice

The contents of this publication are subject to change. This company reserves

the right to alter the contents of this publication at any time and without notice.

The contents of this publication may contain inaccuracies or typographical errors

and is supplied for informational use only.

Intel and Pentium are registered trademarks of Intel Corporation.

OS/2 and IBM are registered trademarks of Intemational Business Machines.

Windows and MS-DOS are registered trademarks of Microsoft Corporation.

AWARD is a registered trademark of Award Software Inc.

Other brand, corporate, and product names may or may not be registered trademarks

or copyright of their respective companies.

FCC & DOC Compliance

Federal communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following

two conditions:

!This device may not cause harmful interference.

!This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generatesm uses and can radiate radio frequency

energy and, if not installed and used in accordance with the manufacturer’s

instructions, may cause harmful interference to radio communication. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

!Re-orient or relocate the receiving antenna.

!Increase the separation between the equipment and the receiver.

!Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

!Consult the dealer or an experienced radio/TV technician for help.

Warning! The use of shielded cables for the connection of the monitor to

the graphics card is required to assure compliance with FCC regulations

Changes or modifications to this authority to operate this equipment.

CONTENTS

General Description

Manual Features / Package Check List........................................................I

SECTION 1: PRODUCT INFORMATION

1-1 Mainboard Specifications..............................................................1-2

1-2 Mainboard Layout..........................................................................1-3

SECTION 2: HARDWARE INSTALLATION

2-1 Jumper Settings.............................................................................2-1

2-2 Connectors....................................................................................2-3

2-3 Game / Audio Connector...........................................................2-7

2-4 System Memory Installation................................................................2-8

SECTION 3: CMOS SETUP UTILITY

3-1 BIOS Setup Main Menu.....................................................................3-1

3-2 Standard CMOS Setup......................................................................3-2

3-3 Adcanced BIOS Features.........................................................................3-4

3-4 Advanced Chipset Features .............................................................3-8

3-5 Integrated Peripherals................................................................3-11

3-6 Power Management Setup........................................................... 3-15

3-7 PnP/PCI Configurations.......................................................3-18

3-8 PC Health Status......................................................................... 3-19

3-9Frequency/Voltage Control.............................................................. 3-19

3-10 Load Fail-Safe Defaults.....................................................................3-21

3-11Load Optimized Defaults..............................................................3-21

3-12 Set Supervisor/Use Password.....................................................3-22

3-13 Save & Exit Setup...................................................................3-22

3-14 Exit Without Saving...........................................................................3-22

SECTION 4: SOFTWARE UTILITY

4-1 VIA V x D Setup Program.....................................................................4-1

4-2 VIA Audio Setup Program...................................................................4-1

4-3 VIA Chipset Driver Setup Program........................................................4-2

4-4 VIA Hardware Monitor System V1.05....................................................4-2

Manual FeaturesManual Features

Manual Features

This manual is divided into the following four sections:

Section 1: Product InformationSection 1: Product Information

Section 1: Product Information

A brief overview of what comes in the mainboard package, the mainboard layout an the

specification it appears.

Section 2: Hardware InstallationSection 2: Hardware Installation

Section 2: Hardware Installation

Tell you the usage of the mainboard jumpers and the connectors.

Section 3: CMOS Setup UtilitySection 3: CMOS Setup Utility

Section 3: CMOS Setup Utility

A summary of the mainboard CMOS (BIOS) Setting.

Section 4: BIOS / Software UtilitySection 4: BIOS / Software Utility

Section 4: BIOS / Software Utility

Introduction of some useful mainboard BIOS / Software utility.

Package Check ListPackage Check List

Package Check List

This IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4 mainboard package contains the following items. Please inspect the

package contents and confirm that every thing is there. If anything is missing or damaged,

call your vendor for instructions before operating.

The Package includes:

!One IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4 mainboard

!One Floppy Interface Cable

!One IDE Interface Cable

!One Motherboard Resource CD

General DescriptionGeneral Description

General Description

Thanks for purchasing IEZ / ITZV4 Socket 370IEZ / ITZV4 Socket 370

IEZ / ITZV4 Socket 370IEZ / ITZV4 Socket 370

IEZ / ITZV4 Socket 370 mainboard. IEZIEZ

IEZIEZ

IEZ is

based on Intel 810E

chipset (North Bridge FW82810E & South Bridge FW82801AA). The 810E chipset provides

stability and value with Intel graphics performance and smart integration. ITZV4ITZV4

ITZV4ITZV4

ITZV4 chipset

is Intel 810(North Bridge FW82810 & South Bridge FW82801AA). It is a highly integrated

chipset designed for the basic graphics / multimedia PC platform. IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4

provide you perfect function to be the same with your system operation and end user.

This user’s manual contains all the information and features that show you how to use

the IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4IEZ / ITZV4

IEZ / ITZV4 motherboard. Please take a moment to familiarize yourself with the design

and organization of this manual.



IEZ / ITZV4 Motherboard User’s Manual

SECTION 1

Product InformaProduct Information

Product Information

1-1 Mainboard Specifications

IEZ / ITZV4 Motherboard User’s Manual

1-1

I Product Information

Form Factor Micro ATX form factor

Board Size 24.4cm x 19.0cm

CPU Supports Socket 370 CPU--Celeron(PPGA) & Coppermine(FC-PGA)

Supports FSB 66.8/73/100/103/118/124/133/137/140/150MHz

Supports CPU type/clock by jumperless BIOSset up

System Memory DIMM 168-pin x 2, SDRAM maximum 512MB

Chipset

Intel 810 / 810E Chipsets including:

-Intel 82810(ITZV4) / Intel 82810E(IEZ)--GMCH

-Intel 82801AA ICH

-Intel 82802AB FWH

Expansion Slots 3 x PCI slots

1 x ISA slot

1 x AMR connector for MC'97

Serial Port Two serial ports UATR 16550 compatible

Parallel Port

One parallel port supports:

-SPP-standard parallel port

-EPP-enhanced parallel port

-ECP-extemded capabilities port

Floppy Interface Support drivers inches/format with:

-3.5 inches-720KB/1.44MB/2.88MB

-5.25 inches-360KB/1.2MB

Ide Interface Dual Ide Interface support 4 x IDE HDD or CDROM

Support PIO Mode 4, ULTRA DMA/33 & ULTRA DMA/66

USB Port Two USB ports supported

Support USB Legacy Keyboard function

PS/2 Mouse PS/2 mouse supported by connector onboard

PS/2 Keyboard PS/2 Keyboard supported by connector onboard

Sound Function ON-ICH Audio Codec AC'97

Fuse Support Recoverable fuse for USB,KB & MOUSE

RTC and Battery Built in ICH

Lithium(CR-2032) battery

Power Connector ATX

Wake up Function LAN wake up

RTC Alarm wake up

Hardware Monitor

3 Fan speed Monitor

4 Positive Voltage Inputs, 2 intrinsic voltage monitoring

Over temperature indicate output

Automatic Power on voltage detection beep

BIOS

Award BIOS

Supports APM, DMI and ACPI

Supports STR(Suspend To RAM)

Supports virus warning

Supports Flash / Upgrade BIOS functions

LED Indicator System Power LED

HDD activity LED

System Suspend LED

1-21-2

1-2 Motherboard LayoutMotherboard Layout

Motherboard LayoutMotherboard Layout

Motherboard Layout

I Product Information

IEZ / ITZV4 Motherboard User’s Manual

1-2

JumpersJumpers

Jumpers

1. JP2 CPU Clock Frequency

2. JP1 ClearCMOS

3. CON13 COM2

4. CON16 IrDA

5. CON11,CON12 CD_IN

Expansion SocketsExpansion Sockets

Expansion Sockets

1. DIMM1 Support 168-pin DIMM Memory

2. DIMM2 Support 168-pin DIMM Memory

Expansion SlotsExpansion Slots

Expansion Slots

1. CPU Socket 370 CPU

2. PCI slot1 to slot3 32-bit PCI Bus Expansion slot

3. ISA slot ISA Bust Expansion slot

3.AMRAMR Expansion Slot for MC97 Devices

ConnectorsConnectors

Connectors

1. IDE1 Primary IDE Connector

2. IDE2 Secondary IDE Connector

3. Floppy Floppy Drive Connector

4. Panel - PowerOn ATX Power on

- Reset Reset Swithch Connector

- HDD Led HDD Led Connector

- Power Led ATX Power Led Connector

- Speaker Chassis Speaker Connector

- KEYLOCK Keyboard Lock Switch Connector

5. Sys Fan System Fan Connector

6. CPUFan CPU Fan Connector

7. ATX Power ATX Power Connector

8. COM2 COM2 Connector

9. CD Audio CD-IN Connector

10. Joystick Game / Audio Connector

11. Printer Ptinter (Parallel) Port Connector

12. USB Universal Serial Bus Port1 and Port2

13. PS/2 Mouse PS/2 Mouse & Keyboard Connectors

IEZ / ITZV4 Motherboard User’s Manual

1-3

I Product Information

SECTON 2

HARDWARE INSTALLATION

This section gives you a step-by step procedure on how to install your system. Follow each

section accordingly.

2-1 Jumper Settings

Please refer the following figures for the locations of the jumpers on the mainboard.

2-1.1 CMOS Clear Setting

JP1 Clear CMOS

Clear CMOS Normal

(Default)

To clear CMOS,please follow the steps below:

1. Power off the system and unplug the chassis AC power cord.

2. Short JP1 at pin 2-3 for few seconds.

3. Set JP1 back to its Normal position at pin 1-2.

4. Plug the AC power cord to the chassis.

5. Power on the system and load the BIOS setup default.

IEZ / ITZV4 Motherboard User’s Manual

2-1

2-1.2 CPU Type Setting

Static Precautions

Static electricity can be a serious damage to the electronic components on this mainboard.

To avoid damage caused by electrostatic discharge, observe the following precautions:

- Don’t removes the motherboard from its anti-static packaging until you are ready to

install it into a computer case.

- Before you handle the motherboard in any way, touch a grounded, antistatic surface,

such as an unpainted portion of the system chassis, for a few seconds to discharge

any built-up static electricity.

- Handle add-in cards and modules by the edges or mounting bracket.

CPU Setting

After installing the CPU, you must set the clock selection jumpers to match the frequency of

the CPU. Find the jumpers labeled JP2 set the jumpers (from 1 to 8 jumpers, we call them as

FS0, FS1, FS2 and FS3) according to the figure below and table for CPU frequency. JP2’ s

jumpers from 9 to 12 (we call them as FS4 and FS5) are used for over-clock, we also

recommend them to users.

II. HARDWARE INSTALLATION

CPU Frequency

IEZ / ITZV4 Motherboard User’s Manual

2-2

FS0

FS1

FS2

FS3

FS4

FS5

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EUPA Carte mère

EUPA

EUPA ITZV6 Manuel utilisateur

EUPA

EUPA AP0 Manuel utilisateur

EUPA

EUPA VXZA Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur