Important:
The appliance shall be installed in accordance with;
• This installation instruction booklet
• Local gas tting regulations and The Rules in Force
• BS 5440-1
• BS 5871-1:2005 & BS 6891
• This installation instruction booklet
• Must be installed by a Registered Installer
• Converting this appliance for use with G31 Propane must be done
by a Registered Installer
• This appliance is for use on Natural Gas (G20) at a supply pressure of 20mbar and
Propane (G31) at a supply pressure of 37 mbar
• In IE, consult document I.S. 813:1996 Domestic Gas Installation
DISTRIBUTED BY:
Urban Fires limited
Registered Oce
52 Trafalgar Court
London E1W 3TF
Tel: +44 (0)207 183 1806
Fax: +44 (0)207 183 1879
MANUFACTURED BY:
Escea Ltd, PO Box 5277
Dunedin NZ
Tel: +64 3 478 8220
www.escea.com
WARNING:
Failure to follow these instructions could cause a malfunction of the re, which
could result in death, serious bodily injury, and/or property damage. Failure to
follow these instructions may also void insurance cover and/or product warranty.
Installation:
Installation must be carried out by a registered installer who, on completion of the
installation, must issue a certicate of compliance, in accordance with national and/or
local codes. If a certicate of compliance is not issued then the Escea warranty may be
void.
Before installation, ensure that the local distribution conditions (identication of type of
gas and pressure) and the adjustment of the appliance are compatible.
Warranty Repair and Annual Servicing:
Warranty repair work must be carried out by a recognised Escea gas re technician. It
is recommended that recognised Escea Gas re technicians are also used to carry out
annual servicing requirements (particularly during the warranty period). For contact
details of authorised Escea technicians in your area, please contact the retailer from
whom the appliance was purchased.
This product must be installed according to these instructions and in compliance with
all relevant building, gas tting and other statutory regulations (eg. BS 5871-1:2005,
BS5440-1 and BS 6891). Any shortcomings in the appliance and ue installation will be
the responsibility of the installer, and Escea will not be accountable for any such failings
or their consequences.
