Ergotron UKMCBK Manuel utilisateur

300-5223-00 rev. F

• /

01– Wrist Rest......................................Qty. 1............. 575-5001-01

02– Mouse Rail....................................Qty. 1............. 575-5001-02

03– Mouse Pad....................................Qty. 1............. 575-5001-03

04– Caddy Platform...........................Qty. 1............. 575-5001-04

05– Acorn Nuts ..................................Qty. 4............. 325-5023-00

06– Wood Screws

3/4”(for UKMCBK)......................Qty. 10..............325-5106-00

1/2”(for 169BK)...........................Qty. 8.................325-5008-00

07– Rubber Bumpers ......................Qty. 2.................175-5130-03

08– Caddy Tray

For UKMCBK.................................Qty. 1.................225-5046-00

For 169BK......................................Qty. 1.................575-5001-12

09– Caddy Mechanism

For UKMCBK.................................Qty. 1.................575-5001-09

For 169BK......................................Qty. 1.................575-5001-13

10– Caddy Screws..............................Qty. 4.................575-5001-10

11– Keyboard Pads ...........................Qty. 4.................575-5001-11

Component list for part # UKMCBK, 169BK

Before beginning, please take a moment to review the parts

list to be sure your shipment is complete. Also, review the

instructions of all Anthro products you are planning to include in

this installation.

An electric drill and 1/8” drill bit may be required for this

assembly although some Anthro products are predrilled to

accept these caddies. A 5/32”Hex Driver, (provided with your

cart) plus a Philips screwdriver & an adjustable wrench (not

included) are required for this assembly.

User's Guide

1 of 3

Universal Keyboard & Mouse Caddy

Compact Keyboard & Mouse Caddy

www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: [email protected]

300-5223-00 rev. F

• /

Adjust the Platform height & angle: 1. Rotate the Handle

counterclockwise. 2. Reposition the Shelf, then retighten the

Handle.

Adjust the Platform rotation: 1. Firmly grasp the Platform,

then rotate to the desired angle.

(#10-24) Acorn Nut

325-5023-00

Step 2(requires the adj wrench & screwdriver)

Carefully rotate your cart back onto its casters.

Pull the mechanism to the front and place the platform

onto the mechanism. Secure the platform using the four

philips screws and the acorn nuts.

Finally, install the mouse rail and pad.

Congratulations! Your assembly is complete.

(#10-24) Caddy Screw

575-5001-10

Adjusting your Keyboard & Mouse Caddy

STEP 2A

STEP 2B

Caddy Screws

Acorn Nuts

Platform

Mouse Rail &

Pad

KB Pads

Rotate

Congratulations! Your assembly is complete.

3/4”Wood Screw

325-5106-00 Rubber Bumper

175-5130-03

Step 1

Carefully rotate your Cart upside down. For predrilled Carts:

align the tray with the holes on the cart shelf. Attach the

tray using wood screws (8 for the Compact; 10 for the UKMC)

leaving open the holes at the center front and back. Insert one

wood screw through a rubber stop and install towards the rear

of the cart.

If your cart shelf is not predrilled: use the tray as a template and

mark the hole locations. Carefully drill all holes using a 1/8”drill

bit (1/2”deep for compact, 3/4”deep for others). TIP: Use a

small amount of masking tape to mark the depth on your drill

bit. Now install the tray as described above.

Slide the Caddy Mechanism into the Tray and push to the rear.

If needed, rotate the mechanism handle to lift the mechanism

to slide it back. Finally, install the remaining wood screw and

rubber bumper into the tray.

Rubber Bumper

Wood Screws

Tray

DO NOT install a

Wood Screw into this Hole

Front of Cart

STEP 1A

Caddy Mech-

anism

Rubber Bumper

Rear

Cart

Wood Screw

Rotate Handle

to LIFT

2 of 3

300-5223-00 rev. F

• /

For local customer care phone numbers visit: http://contact.ergotron.com

For Service visit: www.ergotron.com

For Warranty visit: www.ergotron.com/warranty

3 of 3

www.ergotron.com |

USA: 1-800-888-8458

Europe: +31 (0)33-45 45 600

China: 400-120-3051

Japan: [email protected]

For the latest User Installation Guide please visit: www.ergotron.com

Ce manuel convient aux modèles suivants

Autres manuels Ergotron Support et étagère

Ergotron

Ergotron LX Sit-Stand Manuel utilisateur

Ergotron

Ergotron 100 Series Keyboard Pivot Manuel utilisateur

Ergotron

Ergotron 45-214-026 Dimensions

Ergotron

Ergotron All-in-One Stand Manuel utilisateur

Ergotron

Ergotron StyleView 5 Manuel utilisateur

Ergotron

Ergotron Neo-Flex Manuel utilisateur

Ergotron

Ergotron Neo-Flex Manuel utilisateur

Ergotron

Ergotron 9" Vertical Lift Manuel utilisateur

Ergotron

Ergotron Neo-Flex Manuel utilisateur

Ergotron

Ergotron Grommet Kit Manuel utilisateur

Ergotron

Ergotron MX Desk Mount LCD Arm Manuel utilisateur

Ergotron

Ergotron LX Desk Mount LCD Arm Manuel utilisateur

Ergotron

Ergotron LX Sit-Stand Manuel utilisateur

Ergotron

Ergotron WorkFit-S Manuel utilisateur

Ergotron

Ergotron Neo-Flex Mobile Media Center LD Manuel utilisateur

Ergotron

Ergotron 97-590 Manuel utilisateur

Ergotron

Ergotron Neo-Flex Widescreen Stand Manuel utilisateur

Ergotron

Ergotron StyleView Sit Stand Combo Arm Manuel utilisateur

Ergotron

Ergotron Neo-Flex Laptop Cart Manuel utilisateur

Ergotron

Ergotron Height Adjustable Systems HD Series Arms Dimensions

Ergotron

Ergotron Workfit-SR Manuel utilisateur

Ergotron

Ergotron WORKFIT Manuel utilisateur

Ergotron

Ergotron WorkFit-P Manuel utilisateur

Ergotron

Ergotron 100 Series Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur