Epson PowerLite 503c Fiche technique

EPSON®PowerLite®503c/713c

Quick Setup

Connect the power cord to your projector and plug the other end into a grounded outlet.

3Connect the other end to your laptop’s video or monitor port. If you can’t connect the cable

to your PowerBook®, you may need to use an adapter. See your User’s Guide for instructions.

Locate everything

you’ll need

Plug in your projector

Turn on your equipment

Caution: Before unplugging

the projector...

To shut the projector down properly:

1. Press the red Power button twice.

Let the projector cool while the power

light flashes orange (about a minute).

2. Once the light stops flashing and stays

on, it’s safe to unplug the projector.

Never unplug the projector when the

power light is green or flashing orange.

For this setup, you’ll need just these two cables:

You won’t need to install any software.

Make sure your projector and laptop are turned off.

Connect one end of the computer cable to

the Computer port on the projector.

Connect the projector

to your laptop

power cord computer cable

The power light

turns orange.

Rotate the lens ring to pop out the lens,

then squeeze the tabs to remove the lens cap.

Pop out the lens

To turn on the projector, press the red Power button.

The power light flashes green, and then stays on.

Turn on or restart your laptop. (Windows®only: If you see

this Add New Hardware screen, click Cancel.)

Power button

Follow these

instructions to

connect your laptop

to the projector.

To connect other

devices, such as a VCR

or desktop

PC, see

your User’s Guide.

Turn Over

squeeze here

EPSON PowerLite 503c/713c

If you see a blank screen or the No signal message

after turning on your laptop, check the following:

Make sure the power light is green and

not flashing and the lens cover is off.

Try turning off the laptop and restarting it.

If you’ve connected more than one computer and/or video source,

you may need to press the Source button on top of the projector.

(Allow a few seconds for the projector to sync up after pressing it.)

Adjust the image

1Rotate the focus ring to sharpen the image.

If You See a Blank Screen

Hold down the Fn button and press the function key that lets you

display on an external monitor. It may have an icon such as ,

or it may be labelled CRT/LCD. Allow a few seconds for the projector

to sync up after pressing it.

On most systems, the key lets you toggle between the LCD

screen and the projector, or display on both at the same time.

You might need to use the Display utility in the Control Panel

to enable both the LCD screen and external monitor port.

Check your laptop’s manual or online help for details.

If you’re using a Windows laptop:

If you’re using a Macintosh®:

CPD-12797

EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

2Rotate the lens ring to reduce or enlarge the image.

(You can also move the projector closer to or farther

from the screen.)

3To raise the image, pull up the blue foot release levers and lift

the front of the projector. Once the image is positioned where

you want it, release the levers to lock the feet in position.

4If your image looks like or , you’ve placed the projector

off to one side of the screen, at an angle. Move it directly in

front of the center of the screen, facing the screen squarely.

5If your image looks like or , press the + or – side of

the Keystone button to correct the shape of the image.

EPSON®PowerLite®503c/713c

Note: If you see a blank screen after focusing,

see the instructions in the box below.

1. From the Apple menu, select Control Panels, then click Monitors

or Monitors and Sound.

2. Click the Arrange icon.

3. Drag one monitor icon on top of the other. This lets you display

on the projector screen as well as the LCD screen.

If the Arrange option isn’t available, you may need to select one of the

Simulscan resolution settings:

4. Click the Monitor icon.

5. Select a Simulscan resolution as shown. (Allow a few seconds for

the projector to sync up after making the selection.)

No signal

drag one monitor icon

on top of the other

click here

select a Simulscan

resolution

click here

No signal

lens ring

focus ring

Autres manuels pour PowerLite 503c

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Projecteur

Epson

Epson EH-LS650B Fiche technique

Epson

Epson PowerLite 6100 Manuel utilisateur

Epson

Epson EMP-73 Manuel utilisateur

Epson

Epson 710C - PowerLite UXGA LCD Projector Manuel utilisateur

Epson

Epson EB-Z8000WUNL Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 4040 Manuel utilisateur

Epson

Epson EB-590WT Manuel utilisateur

Epson

Epson EH-TW5825 Manuel utilisateur

Epson

Epson PowerLite 500c Manuel utilisateur

Epson

Epson EMP-732 Manuel utilisateur

Epson

Epson PowerLite S5 Series Manuel utilisateur

Epson

Epson EX3200 Fiche technique

Epson

Epson V11H177020 - Powerlite 76C LCD Projector Guide de référence

Epson

Epson PowerLite W6 Manuel utilisateur

Epson

Epson PowerLite Pro G5350NL Manuel utilisateur

Epson

Epson PowerLite 73c Manuel utilisateur

Epson

Epson PowerLite S17 Manuel du système

Epson

Epson BrightLink 1480Fi Manuel utilisateur

Epson

Epson 6110i - PowerLite XGA LCD Projector Manuel utilisateur

Epson

Epson EB-S8 Manuel utilisateur

Epson

Epson PowerLite Presenter i/i+ Manuel utilisateur

Epson

Epson VS230 Fiche technique

Epson

Epson EX3220 Manuel utilisateur

Epson

Epson EMP-51 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur

JVC

JVC 1108TTH-AO-AO Manuel utilisateur