Epson PowerLite 1750 Manuel du système

Autres manuels pour PowerLite 1750

5

Ce manuel convient aux modèles suivants

3

Table des matières

Autres manuels Epson Projecteur

Epson

Epson PowerLite 1825 Fiche technique

Epson

Epson PowerLite EMP-1810 Guide de référence

Epson

Epson LightScene EV-100 Manuel utilisateur

Epson

Epson PowerLite 703C Manuel utilisateur

Epson

Epson EMP-7850 Manuel utilisateur

Epson

Epson powerlite home cinema 3010+ Manuel utilisateur

Epson

Epson EX100 Guide de référence

Epson

Epson EB-W10 Manuel utilisateur

Epson

Epson DREAMIO EH-DM3 Manuel utilisateur

Epson

Epson BrightLink 475Wi Manuel du système

Epson

Epson Home Cinema LS-100 Manuel utilisateur

Epson

Epson PowerLite Pro Z8455WUNL Instructions d'utilisation et de sécurité

Epson

Epson PowerLite E20 Manuel utilisateur

Epson

Epson MegaPlex MG-850HD Manuel utilisateur

Epson

Epson EB-S82 Manuel utilisateur

Epson

Epson PowerLite Pro G5900 Manuel utilisateur

Epson

Epson ActionTower 3000 Computer Manuel utilisateur

Epson

Epson Home Cinema 880 Manuel utilisateur

Epson

Epson EB-755F Manuel du propriétaire

Epson

Epson PowerLite S7 Manuel utilisateur

Epson

Epson brightlink Manuel utilisateur

Epson

Epson Epson Projectors with an HD-15 VGA Analog/Component... Dimensions

Epson

Epson Elp-3500 Manuel utilisateur

Epson

Epson PowerLite 1940W Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur

JVC

JVC 1108TTH-AO-AO Manuel utilisateur

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

1

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury.

4. Slide the lamp cover out and lift it off.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

2

6. Lift up the lamp handle and gently pull the lamp out of the projector.

Caution: Lift the lamp handle carefully to avoid damaging the handle as you pull out the lamp.

Note: The lamp(s) in this product contain mercury. Please consult your state and local

regulations regarding disposal or recycling. Do not put in the trash.

5. Lift up the metal bar securing the lamp.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

3

7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right

way. Press down on the area shown to secure the lamp in place.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

8. Press the metal bar down over the lamp until it clicks into place on both sides.

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on.

Reset the lamp timer to zero to keep track of the new lamp’s usage.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 1750 / 1760W / 1770W / 1775W

4

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement

message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage

information.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5. Select Yes and press Enter.