Epson Epson Projectors with an HD-15 VGA Analog/Component... Dimensions

Page 1 of 1

EPSON PRODUCT SUPPORT BULLETIN

Date: 8/30/2007 Originator: DS

PSB #: PSB.2007.08.001 Authorization:

Reference: N/A Total Pages: 1

Product(s): Epson Projectors with an HD-15 VGA Analog/Component Input

Subject: Elmo HV-110XG Document Camera and Projector Compatibility

This bulletin was created to inform you of an operational issue with the Elmo HV-110XG

Document Camera when initially connected to an Epson projector.

Problem:

When attempting to use the Elmo HV-110XG Document Camera connected via the VGA HD15

connection to display content from its document bed. When connected to the projector, the

projector displays only the Blue Screen - No Signal message and will blink off and on or

display just the Blue Screen - No Signal message. When a computer is connected to the Elmo

HV-110XG Document Camera and switched to Pass-Through mode, the computer image is

displayed correctly by the projector. When switching back to the document table source of the

Elmo HV-110XG Document Camera, the problem returns. The Elmo HV-110XG Document

Camera puts out a Progressive Scan 20fps signal to the projector's VGA Analog port. This

signal is detected at 15 kHz Vertical and 291.8 kHz Horizontal frequencies which are beyond

projector sync specifications.

Solution:

With the Elmo HV-110XG Document Camera powered on and connected to the projector via

the VGA computer cable, access the Computer1/Computer2 setting in the projector menu

system and select the Component setting within the appropriate connection. This will allow

the Elmo HV-110XG Document Camera and projector to sync and the projector to display the

image of the document camera bed and its contents. However, the image will have a pink

cast. To eliminate the pink cast, change the projector setting from Component to RGB then to

Auto and exit from the menu. The projected image will now look normal. This will now allow

the Elmo HV-110XG Document Camera to sync and display the image properly to any other

connected Epson projector without having to change the projector settings.

EPSON PRODUCT SUPPORT BULLETIN

Date: 04/02/2002 Originator: JAM

PSB #: PSB.2002.04.007 Authorization:

Reference: TI01-12e Total Pages: 3

Product(s): PowerLite 505c / 715c

Subject: Compact Flash Card and Adapter Support

This bulletin was created to inform you of Compact Flash Support for the PowerLite 505c and

PowerLite 715c projectors.

Cards tested:

The following Compact Flash cards and adapters have been tested and added to the Extended Card

Support Listing.

Compact Card Make/Size Epson CF Adapter SimpleTechnology Adapter

Epson 8MB Flash Card Supported Supported

Lexar 32MB Flash Card Supported Supported

Lexar 48MB Flash Card Supported Supported

Lexar 64MB Flash Card Supported Supported

SimpleTechnology 128MB Card Supported Supported

Memorex 256MB Card Partially supported *1, *5 Partially supported *1, *5

SanDisk 512MB Card Partially supported *1, *6 Partially supported *1, *6

Extended Card Support Listing:

Manufacturer Name of product Vol. Model number Adapter

manufacturer Adapter model name Supporting status Problem and

countermeasure Remarks

Micro drive IBM 340MB microdrive 340MB DMDM-10340 IBM PC Card Adapter for IBM

microdrives Supported

SONY MSAC-PC1 Supported *4

SONY MSAC-PC2 Supported

SONY MEMORY STICK 4MB 4MB MSA-4A

I-O DATA PCMS-ADP Supported

SONY MSAC-PC1 Supported *4

SONY MSAC-PC2 Supported

SONY MEMORY STICK 32MB 32MB MSA-32A

I-O DATA PCMS-ADP Supported

SONY MSAC-PC1 Supported *4

SONY MSAC-PC2 Supported

Memory stick

SONY MEMORY STICK 64MB 64MB MSA-64A

I-O DATA PCMS-ADP Supported

Hagiwara Syscom HPC-SV03A Partially supported *1

MELCO RFD-A2 Partially supported *1

I-O DATA PCFDCⅣ-ADP Supported

OLYMPUS MA-2 Supported

Hagiwara

Syscom SmartMedia 2MB 2MB SMFV002

FUJIFILM PC-AD3 Supported

Hagiwara Syscom HPC-SV03A Partially supported *1

MELCO RFD-A2 Partially supported *1

I-O DATA PCFDCⅣ-ADP Supported

OLYMPUS MA-2 Supported

FUJIFILM SmartMedia 16MB 16MB MG-16S

FUJIFILM PC-AD3 Supported

Hagiwara Syscom HPC-SV03A Partially supported *1

MELCO RFD-A2 Partially supported *1

I-O DATA PCFDCⅣ-ADP Supported

OLYMPUS MA-2 Supported

MELCO BUFFALO 32MB 32MB SMFDV032

FUJIFILM PC-AD3 Supported

Hagiwara Syscom HPC-SV03A Partially supported *1&*2 With ID

MELCO RFD-A2 Partially supported *1&*2 With ID

I-O DATA PCFDCⅣ-ADP Partially supported *2 With ID

OLYMPUS MA-2 Partially supported *2 With ID

Smartmedia

FUJIFILM SmartMedia-ID 64MB 64MB MG-64SW

FUJIFILM PC-AD3 Partially supported *2 With ID

Card type Manufacturer Name of product Vol. Model number Adapter

manufacturer Adapter model name Supporting status Problem and

countermeasure Remarks

EPSON CompactFlash Card 8MB 8MB 60045390 EPSON 60045400 Supported

EPSON CompactFlash Card 8MB 8MB ECFA-08A EPSON 60045400 Supported

EPSON CompactFlash Card 8MB 8MB ECFB-08 EPSON 60045400 Supported

EPSON CompactFlash Card 16MB 16MB 60046790 EPSON 60045400 Supported

EPSON CompactFlash Card 16MB 16MB ECFA-16 EPSON 60045400 Supported

EPSON CompactFlash Card 16MB 16MB ECFD-16 EPSON 60045400 Partially supported EasyMP

Ver1.10

or upper

version

LEXAR MEDIA Compact Flash Card 32MB 32MB EPSON/Simple

Technology Supported

LEXAR MEDIA Compact Flash Card 48MB 48MB EPSON/Simple

Technology Supported

LEXAR MEDIA Compact Flash Card 64MB 64MB Supported

MITSUBISHI CompactFlash 15MB 15MB MF0015M-

03BA01 EPSON 60045400 Supported

MEMOREX Compact Flash Card 256MB 256MB EPSON/Simple

Technology Partially Supported *1 & *5

SANDISK Compact Flash Card 512MB 512MB EPSON/Simple

Technology Partially Supported *1 & *6

SIMPLE

TECHNOLOGY Compact Flash Card 128MB 128MB EPSON/Simple

Technology Supported

EPSON 60045400 SupportedI-O DATA PCCF-40M 40MB PCCF-40M

I-O DATA CompactFlash Platform

Adapter Supported

EPSON 60045400 Supported

Compact

flash

MELCO RCF-C 48MB RCF-C MELCO RCF-A Supported

EPSON Flash Packer 40MB 40MB FP40 - - SupportedFlash ATA

TDK Flash Memory 96MB 96MB SFD096H - - Supported

Modem Not supported

LAN Not supported

IDE interface Not supported *3 For

external

CD-ROM

*1 When Capture/Scenario is created with overwrite protection mode, files can become inaccessible (both read or write) and a

warning message, "there is no file" is displayed. When the card is removed and re-inserted, the card recovers.

*2 When capture is made with overwrite protection mode, in some cases the message "under overwrite protection"

or "capture failed" can appear.

*3 It can take five to ten seconds until the card slot access LED is

activated.

*4 This adapter (MSAC-PCA) needs more time for formatting compared to other card adapters.

(Ordinarily 1 sec. or less is normal but it takes about 2 sec. for this one.)

*5 More than one format may be required before total card size is displayed.

*6 More than one format may be required to use card.

Page 1of 2

EPSON PRODUCT SUPPORT BULLETIN

Date: 03/27/2002 Originator: JAM

PSB #: PSB.2002.03.004A Authorization:

Reference: TI01-35e, Rev. A Total Pages: 1

Product(s): PowerLite 715c and PowerLite 505c

Subject: EasyMP SlideMaker update to Version 1.20

This bulletin was created to inform you of a software update for EasyMP SlideMaker Program.

Reasons:

The update is now compatible with the full version or new installation of Microsoft Office XP.

Versions 1.02 and 1.10 of SlideMaker would fail to transfer slide presentations with the full

version. However upgrades from Office ’97 or Office 2000 to Office XP would function properly

with the previous versions of SlideMaker.

Recommendation:

Please verify the version of EasyMP installed on your system before downloading or installing the

update. Open EMP SlideMaker, click on Help and click on “About EMP SlideMaker”. If you

should see the following screen image, you have an older version of SlideMaker.

Compatibility:

SlideMaker scenario files made from the previous version can be converted to the new update,

however version 1.20 files cannot be opened or viewed by version 1.02 SlideMaker.

File location:

The file update is posted on Epson’s WEB site with this bulletin.

Updating the software:

The update utility Epson10316.exe is self-extracting program. Double-clicking the utility will

extract all the update files to the following folder:

C:\EPSON\epson10316

The setup utility will automatically launch after the files have extracted. Follow the onscreen

instructions during the installation process.

Page 2of 2

Rebootthe system after the update is complete in order for the changes to take effect.

Page 1 of 4

EPSON PRODUCT SUPPORT BULLETIN

Date: 06/26/2001 Originator: JAM

PSB #: PSB.2001.06.006 Authorization:

Reference: None Total Pages: 4

Product(s): PowerLite 715c and PowerLite 505c

Subject: Removing the Projector USB files and devices

This bulletin was created to inform you how to remove the files and devices associated with

the USB projector(s). Also listed below are example screen shots to assist you.

Reasons:

1. You wish to remove all of the projector’s USB support “Files” and “Devices” from a system,

on which they are no longer being used.

2. The projector would not install properly and you wish to re-install it from a clean condition.

3. You are experiencing USB conflicts and need to make sure the projector is not the source

of the conflicts by removing it.

Files:

There are only 2 files associated with the projector that should be removed. The two files are

located in the following Windows folder: C:\WINDOWS\INF\OTHER. These are the file

names:

EPSONeasympstusb.inf (The prefix EPSON in the filename may or may not be listed)

EPSONeasympstvxd.inf (The prefix EPSON in the filename may or may not be listed)

1.) To remove click on START, Programs, Windows Explorer.

2.) From the pull-down menus, go to View, Folder Options, folder tab View, Hidden files

folder and click in the circle ‘Show all files’ so that it has a bullet, then click on the

‘APPLY’ button, then click on the ‘OK’ button.

3.) Click on the C: drive button so the folders expand down.

4.) Locate and click on the WINDOWS folder so the folders expand down.

5.) Locate and click on the INF folder so the folder expands down.

6.) Locate and click on the OTHER folder so the folder opens. On the right side of the

screen, locate and click on one of the file names listed above. Refer to Image # 1

below.

7.) From the pull-down menus, go to File, Delete, on the ‘Confirm File Delete’ screen, click

on Yes.

8.) Locate the second file and delete it also.

Devices:

There are 4 devices that should be removed and their name and locations are:

EPSON ELP/EMP-715 (located under Disk drives from Device Manager)

USB Human Interface Device (located under Human Interface Devices from Device Manager)

ELP/EMP-Series wdm Storage (located under Universal Serial Bus controllers from Device Manager)

Generic USB Hub (located under Universal Serial Bus controllers from Device Manager)

Page 2 of 4

1.) To remove the devices click on START, Settings, Control Panel, double click on the

SYSTEM icon.

2.) On the System Properties screen, click on the tab Device Manager. Double click on the

DISK DRIVES icon. Refer to Image # 2 below.

3.) Click on the EPSON ELP/EMP-715 icon. Click on the REMOVE button on the bottom

of current screen. On the ‘Confirm Device Removal’ screen, click on the OK button.

4.) On the System Properties screen, click on the tab Device Manager. Double click on the

Human Interface Devices icon. Refer to Image # 3 below.

5.) Click on the USB Human Interface Device icon. Click on the REMOVE button on the

bottom of current screen. On the ‘Confirm Device Removal’ screen, click on the OK

button.

6.) On the System Properties screen, click on the tab Device Manager. Double click on the

Universal Serial Bus Controllers icon. Refer to Image # 4 below.

7.) Click on the ELP/EMP-Series wdm Storage icon. Click on the REMOVE button on the

bottom of current screen. On the ‘Confirm Device Removal’ screen, click on the OK

button.

8.) Click on the Generic USB HUB icon. Click on the REMOVE button on the bottom of

current screen. On the ‘Confirm Device Removal’ screen, click on the OK button.

9.) After doing so, restart the system and USB projector support will be completely

removed from the system.

Screen Shots:

Image # 1 - Windows Explorer screen shot of... C:\WINDOWS\INF\OTHER folder

Highlight and delete the “easympstusb.inf” and “easmpstvxd.inf” files.

Page 3 of 4

Image # 2 - Screen shot of... Device Manager/Disk drives

Highlight and remove the “EPSON ELP/EMP-715 device”.

Image # 3 - Screen shot of... Device Manager/Human Interface Devices

Highlight and remove the “USB Human Interface Device”.

Page 4 of 4

Image #4 - Screen shot of... Device Manager/Universal Serial Bus controllers

Highlight and remove the “ELP/EMP-Series wdm Storage” and “Generic USB Hub”.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Projecteur

Epson

Epson PowerLite 735c Manuel utilisateur

Epson

Epson EB-Z8455WU Manuel utilisateur

Epson

Epson PowerLite 83V Manuel utilisateur

Epson

Epson EH-TW9300W Manuel utilisateur

Epson

Epson BrightLink 425Wi Manuel utilisateur

Epson

Epson MOVIEMATE 62 Manuel utilisateur

Epson

Epson EX21 Guide de référence

Epson

Epson MegaPlex MG-850HD Manuel utilisateur

Epson

Epson Home Cinema 5050UB Fiche technique

Epson

Epson Elmo HV-110XG Dimensions

Epson

Epson EF-100WATV Manuel utilisateur

Epson

Epson EMP-30 Manuel utilisateur

Epson

Epson WorkForce 60 Fiche technique

Epson

Epson PowerLite 1222 Manuel utilisateur

Epson

Epson EB-965 Manuel utilisateur

Epson

Epson V11H071920 - PowerLite 9300i SXGA+ LCD... Dimensions

Epson

Epson 1810p - PowerLite XGA LCD Projector Manuel utilisateur

Epson

Epson PowerLite 1880 Manuel utilisateur

Epson

Epson PowerLite 530 Manuel utilisateur

Epson

Epson 826W - PowerLite WXGA LCD Projector Dimensions

Epson

Epson EMP-7950 Manuel utilisateur

Epson

Epson PowerLite 7800pNL Manuel

Epson

Epson PowerLite Home Cinema 500 Fiche technique

Epson

Epson PowerLite X15 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur

JVC

JVC 1108TTH-AO-AO Manuel utilisateur