Epson ESC Manuel utilisateur

ESC/VP21 Communication Manual Home

1 of 9

ESC/VP21 Command User’s Guide for

Home Projector

ESC/VP21 Communication Manual Home

2 of 9

Table of Contents

Introduction to ESC/VP21 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

ESC/VP21 Command Formats- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Applicable Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

Command Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

Appendix - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8

electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No

patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting

from the use of the information contained herein.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,

costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,

repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and

maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable

products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.

EPSON is a registered trademark of SEIKO EPSON CORPORATION. EasyMP is a trademark of SEIKO EPSON CORPORATION. Macin-

tosh, Mac, and iMac are registered trademarks of Apple Computer, Inc. IBM is a registered trademark of International Business Machines

Corporation. Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States of America.

General Notice:

Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. EPSON disclaims

any and all rights in those marks.

ESC/VP21 Communication Manual Home

3 of 9

1.Introduction to ESC/VP21

ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epson projectors.

The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control

projectors using a PC with a terminal emulator such as Microsoft Hyper terminal.

Since ESC/VP21 is independent of communication protocols,Serial, USB or TCP/IP network can be used to transmit the commands to projec-

tors.

•Serial connection

A/V controllers normally use a serial connection to control projectors. Refer to Appendix for details.

•USB connection

A USB interface can be used to control a projector. Refer to Appendix for details.

•Network connection

After establishing a TCP session, ESC/VP21 commands can be sent to projectors. Refer to ESC/VP.net protocol manual.

Video camera

VTR

DVD

Controller Projector

Video

Serial

Projector with USB I/F

USB

Projector with network I/F

A/V controller

with network I/F

Hub

TCP/IP

ESC/VP21 Communication Manual Home

4 of 9

2.ESC/VP21 Command Formats

2.1.Set command format

A set command consists of a command and a parameter. Projector returns a colon after executing the command.

There are two types of parameters. One is fixed such as ON, OFF, or 21.Other is a step parameter such as INC, DEC or INIT.

INC increments the parameter by one.

DEC decrements the parameter by one.

INIT initializes the parameter.

Set command example 1 : SOURCE 21

Colon from projector Command Space Parameter Return

Set command example 2 : VOL INC

Colon from projector Command Space Parameter Return

2.2.Get command format

A get command consists of a command and ?. Projector returns a response parameter after executing the command.

Get command example : SOURCE?

Colon from projector Command ? Return

Response parameter example

SOURCE = 21

Colon from projector Command = Parameter

2.3.Null command

The null command is a command code of the return key code (Hex 0D). Projector returns a colon. The null command can be used to confirm

that the projector is in operation.

2.4.Illegal commands

Projector returns “ERR” and a return key code (Hex 0D) and a colon when it receives invalid commands.

ERR

ESC/VP21 Communication Manual Home

5 of 9

3.Applicable Models

EMP-TW100 / TW100H / TS10 / TW10 / TW200 / TW500 / TW10H / TW200H /TW20 / TW600,520,550,800 /

TW700 / TW1000 / TW2000 / TW3000 / TW4000 / TW5000 / TW420

4.Command Table

(*1)The "PWR ON" command for TW200 and TW200H needs to prepare for use. First step is to turn on the projector. And then send the

"SPWRLVL 01" command to the projector after the status of projector goes into the condition that the projector can receive ESC/VP21

command.

Second steps is to turn off the projector once. The "PWR ON" can work on TW200 and TW200H after the status of projector becomes the

standby state.

•TW500 needs to change the setting item to use "PWR ON" command. To validate the "PWR ON" command of TW500, "Network Mon-

itoring" of "Operation" in "Setting" menu must be set to ON. The "PWR ON" command can work on TW500 after the projector is turned

off once and the status of projector becomes the standby state.

(*2)TW10/TW10H does not support the User Logo function.

Item Command All Models

Power ON/OF ON PWR ON O(*1)

OFF PWR OFF O

A/V Mute ON/OFF ON MUTE ON O

OFF MUTE OFF O

A/V Mute Screen Black MSEL 00 O

Blue MSEL 01 O

User Logo MSEL 02 O(*2)

Item Terminal Signal name Command TW100/

TW100H TS10 TW10/

TW10H TW200/

TW200H TW500

Source change INPUT 1/A Cyclic within “SOURCE 1x”. SOURCE 10 OOO(*3)OO

Analog RGB SOURCE 11 OO - - O

Digital RGB SOURCE 12 -O- - -

RGB Video SOURCE 13 - OOOO

YCbCr(*4 Component) SOURCE 14 --OOO

YPbPr(*4 Component) SOURCE 15 --OOO

Auto SOURCE 1F ----O

INPUT 2/B Cyclic within “SOURCE 2x”. SOURCE 20 OOO(*3)OO

Analog RGB SOURCE 21 OOOOO

RGB Video SOURCE 22 -O- - -

YCbCr(*5 RGB Video) SOURCE 23 OO - - O

YPbPr(*5 YCbCr) SOURCE 24 OO - - O

YPbPr SOURCE 25 ----O

Auto SOURCE 2F ----O

INPUT 3 Cyclic within “SOURCE 3x”. SOURCE 30 ----O

Digital RGB SOURCE 31 O----

INPUT 5 Cyclic within “SOURCE Cx”. SOURCE C0 ---OO

YCbCr SOURCE C4 ---OO

YPbPr SOURCE C5 ---OO

Auto SOURCE CF ----O

VIDEO Cyclic within “SOURCE 4X”. SOURCE 40 OOOOO

VIDEO(RCA) -SOURCE 41 OOOOO

VIDEO(S) -SOURCE 42 OOOOO

VIDEO(YCbCr) -SOURCE 43 O----

VIDEO(YPbPr) -SOURCE 44 O----

ESC/VP21 Communication Manual Home

6 of 9

Item Terminal Signal name Command TW20 TW600/

520/550/

800 TW700 TW1000 TW2000

Source change INPUT 1/A Cyclic within “SOURCE 1x”. SOURCE 10 OOOOO

Analog RGB SOURCE 11 -----

Digital RGB SOURCE 12 -----

RGB Video SOURCE 13 O----

YCbCr(*4 Component) SOURCE 14 OOOOO

YPbPr(*4 Component) SOURCE 15 OOOOO

Auto SOURCE 1F - OOOO

INPUT 2/B Cyclic within “SOURCE 2x”. SOURCE 20 OOOOO

Analog RGB SOURCE 21 OOOOO

RGB Video SOURCE 22 -----

YCbCr(*5 RGB Video) SOURCE 23 -----

YPbPr(*5 YCbCr) SOURCE 24 -----

YPbPr SOURCE 25 -----

Auto SOURCE 2F -----

INPUT 3 Cyclic within “SOURCE 3x”. SOURCE 30 - OOOO

Digital RGB SOURCE 31 -----

INPUT 5 Cyclic within “SOURCE Cx”. SOURCE C0 - OOO -

SCART(*6) SOURCE C3 OOO -

YCbCr SOURCE C4 - OOO -

YPbPr SOURCE C5 - OOO -

Auto SOURCE CF - OOO -

HDMI 2 HDMI SOURCE A0 ----O

VIDEO Cyclic within “SOURCE 4X”. SOURCE 40 OOOOO

VIDEO(RCA) -SOURCE 41 OOOOO

VIDEO(S) -SOURCE 42 OOOOO

VIDEO(YCbCr) -SOURCE 43 -----

VIDEO(YPbPr) -SOURCE 44 -----

ESC/VP21 Communication Manual Home

7 of 9

(*3)Only when TW10 is connected, the source is not cycled within a signal that can select on a terminal by these commands.

(*4)This signal is selected when TW10 and TW20 is connected.

(*5)This signal is selected when TW500 is connected.

(*6)This signal is selected when TW600/520/550/800/700/1000 is connected.

(*7)This command is can be used only for get.

Item Terminal Signal name Command TW3000/

TW4000/

TW5000 TW420

Source change INPUT 1/A Cyclic within “SOURCE 1x”. SOURCE 10 OO

Analog RGB SOURCE 11 -O

Digital RGB SOURCE 12 -

RGB Video SOURCE 13 -

YCbCr(*4 Component) SOURCE 14 OO(*7)

YPbPr(*4 Component) SOURCE 15 O

Auto SOURCE 1F OO

INPUT 2/B Cyclic within “SOURCE 2x”. SOURCE 20 O

Analog RGB SOURCE 21 O

RGB Video SOURCE 22 -

YCbCr(*5 RGB Video) SOURCE 23 -

YPbPr(*5 YCbCr) SOURCE 24 -

YPbPr SOURCE 25 -

Auto SOURCE 2F -

INPUT 3 Cyclic within “SOURCE 3x”. SOURCE 30 OO

Digital RGB SOURCE 31 -

INPUT 5 Cyclic within “SOURCE Cx”. SOURCE C0 -

SCART(*6) SOURCE C3 -

YCbCr SOURCE C4 -

YPbPr SOURCE C5 -

Auto SOURCE CF -

HDMI 2 HDMI SOURCE A0 O

VIDEO Cyclic within “SOURCE 4X”. SOURCE 40 O

VIDEO(RCA) -SOURCE 41 OO

VIDEO(S) -SOURCE 42 OO

VIDEO(YCbCr) -SOURCE 43 -

VIDEO(YPbPr) -SOURCE 44 -

ESC/VP21 Communication Manual Home

8 of 9

5.Appendix

A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the

projector..

Serial Connection (TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000,

TW3000/TW4000/TW5000)

• Select RS-232C at Advanced Setting of the Menu.

• Communication condition

Baud rate :9600 bps

Data length :8 bits

Parity :No

Stop bit :1 bit

Flow control :No

• Connector :D-sub 9pin

• Projector input :Control(RS-232C)

*Theres no effect if DTR and DSR are not used.

USB Connection (TS10,TW200,TW500,TW200H,TW420)

• TS10, select USB at Advanced Setting of the Menu.

• Epson USB VCOM Driver has to be installed in your computer to use USB fpr communication.A COM port is added to your

computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)

in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).

• Connector :USB(B type)

<Projector> (PC serial cable) <Computer>

GND 5 5 GND

RD 2 3 TD

TD 3 2 RD

Signal name Function

GND Common ground

TD Transmitted data

RD Received data

ESC/VP21 Communication Manual Home

9 of 9

Revision History

Revision Issued Date Page Description

A Oct 19,2005 All pages First Release

B Sep 29,2006 All pages Addition of TW700

C Mar 19,2007 All pages Addition of TW1000

D Jun 4,2007 5.p Correction of “Applicable Model”.

E Dec 14,2007 All pages Addition of TW2000

F Nov 14,2008 All pages Addition of TW3000 and TW4000

G Dec 2,2008 All pages Addition of TW5000 and TW420

Autres manuels pour ESC

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Projecteur

Epson

Epson EB-750F Fiche technique

Epson

Epson PowerLite 8300i withEasyMP.net module Manuel utilisateur

Epson

Epson EB-435W guide Manuel utilisateur

Epson

Epson BrightLink Pro 1430Wi Manuel utilisateur

Epson

Epson PowerLite 732c Manuel utilisateur

Epson

Epson 1810p - PowerLite XGA LCD Projector Guide de référence

Epson

Epson AP-60 - Projector Sound Solution Dimensions

Epson

Epson EB-Z10005U Manuel utilisateur

Epson

Epson Home Cinema 2200 Fiche technique

Epson

Epson PowerLite 5300 Manuel utilisateur

Epson

Epson EMP 51/L Manuel utilisateur

Epson

Epson PowerLite S6 Manuel utilisateur

Epson

Epson EB-1880 Manuel utilisateur

Epson

Epson PowerLite S10+ Fiche technique

Epson

Epson PowerLite 1940W Manuel utilisateur

Epson

Epson 410W - PowerLite WXGA LCD Projector Manuel utilisateur

Epson

Epson Pro Cinema 6050UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 6100 Manuel du propriétaire

Epson

Epson PowerLite Pro Z8450WUNL Guide de référence

Epson

Epson PowerLite 1750 Manuel utilisateur

Epson

Epson EMP-62 Manuel utilisateur

Epson

Epson LightScene EV-110 Manuel utilisateur

Epson

Epson EMP 71 Manuel utilisateur

Epson

Epson 410W - PowerLite WXGA LCD Projector Guide de référence

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur

JVC

JVC 1108TTH-AO-AO Manuel utilisateur